382 	s32 ret_val;  in e1000_reset_hw()  local
529 	s32 ret_val;  in e1000_init_hw()  local
646 	s32 ret_val;  in e1000_adjust_serdes_amplitude()  local
689 	s32 ret_val;  in e1000_setup_link()  local
806 	s32 ret_val;  in e1000_setup_fiber_serdes_link()  local
943 	s32 ret_val;  in e1000_copper_link_rtl_setup()  local
957 	s32 ret_val;  in gbe_dhg_phy_setup()  local
1005 	s32 ret_val;  in e1000_copper_link_preconfig()  local
1064 	s32 ret_val;  in e1000_copper_link_igp_setup()  local
1205 	s32 ret_val;  in e1000_copper_link_mgp_setup()  local
1311 	s32 ret_val;  in e1000_copper_link_autoneg()  local
1381 	s32 ret_val;  in e1000_copper_link_postconfig()  local
1418 	s32 ret_val;  in e1000_setup_copper_link()  local
1497 	s32 ret_val;  in e1000_phy_setup_autoneg()  local
1646 	s32 ret_val;  in e1000_phy_force_speed_duplex()  local
1908 	s32 ret_val;  in e1000_config_mac_to_phy()  local
2050 	s32 ret_val;  in e1000_config_fc_after_link_up()  local
2269 	s32 ret_val = E1000_SUCCESS;  in e1000_check_for_serdes_link_generic()  local
2375 	s32 ret_val;  in e1000_check_for_link()  local
2556 	s32 ret_val;  in e1000_get_speed_and_duplex()  local
2620 	s32 ret_val;  in e1000_wait_autoneg()  local
2787 	u32 ret_val;  in e1000_read_phy_reg()  local
2924 	u32 ret_val;  in e1000_write_phy_reg()  local
3099 	s32 ret_val;  in e1000_phy_reset()  local
3136 	s32 phy_init_status, ret_val;  in e1000_detect_gig_phy()  local
3209 	s32 ret_val;  in e1000_phy_reset_dsp()  local
3237 	s32 ret_val;  in e1000_phy_igp_get_info()  local
3315 	s32 ret_val;  in e1000_phy_m88_get_info()  local
3382 	s32 ret_val;  in e1000_phy_get_info()  local
3442 	s32 ret_val = E1000_SUCCESS;  in e1000_init_eeprom_params()  local
4486 	s32 ret_val = E1000_SUCCESS;  in e1000_setup_led()  local
4536 	s32 ret_val = E1000_SUCCESS;  in e1000_cleanup_led()  local
4877 	s32 ret_val;  in e1000_get_cable_length()  local
4990 	s32 ret_val;  in e1000_check_polarity()  local
5052 	s32 ret_val;  in e1000_check_downshift()  local
5087 	s32 ret_val;  in e1000_1000Mb_check_cable_length()  local
5162 	s32 ret_val;  in e1000_config_dsp_after_link_change()  local
5295 	s32 ret_val;  in e1000_set_phy_mode()  local
5341 	s32 ret_val;  in e1000_set_d3_lplu_state()  local
5440 	s32 ret_val;  in e1000_set_vco_speed()  local
5520 	s32 ret_val;  in e1000_polarity_reversal_workaround()  local