88 #define DEB(x,y)	if (i596_debug & (x)) y  macro
677 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: starting i82596.\n", dev->name));  in init_i596_mem()
683 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: i82596 initialization successful\n", dev->name));  in init_i596_mem()
707 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdConfigure\n", dev->name));  in init_i596_mem()
712 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name));  in init_i596_mem()
717 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name));  in init_i596_mem()
727 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name));  in init_i596_mem()
735 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: Receive unit started OK\n", dev->name));  in init_i596_mem()
751 	DEB(DEB_RXFRAME,printk(KERN_DEBUG "i596_rx(), rfd_head %p, rbd_head %p\n",  in i596_rx()
766 		DEB(DEB_RXFRAME, printk(KERN_DEBUG "  rfd %p, rfd.rbd %p, rfd.stat %04x\n",  in i596_rx()
775 			DEB(DEB_RXADDR,print_eth(rbd->v_data, "received"));  in i596_rx()
826 			DEB(DEB_ERRORS, printk(KERN_DEBUG "%s: Error, rfd.stat = 0x%04x\n",  in i596_rx()
870 	DEB(DEB_RXFRAME,printk(KERN_DEBUG "frames %d\n", frames));  in i596_rx()
914 	DEB(DEB_RESET,printk(KERN_DEBUG "i596_reset\n"));  in i596_reset()
942 	DEB(DEB_ADDCMD,printk(KERN_DEBUG "i596_add_cmd\n"));  in i596_add_cmd()
981 	DEB(DEB_OPEN,printk(KERN_DEBUG "%s: i596_open() irq %d.\n", dev->name, dev->irq));  in i596_open()
1027 	DEB(DEB_ERRORS,printk(KERN_ERR "%s: transmit timed out, status resetting.\n",  in i596_tx_timeout()
1034 		DEB(DEB_ERRORS,printk(KERN_ERR "Resetting board.\n"));  in i596_tx_timeout()
1039 		DEB(DEB_ERRORS,printk(KERN_ERR "Kicking board.\n"));  in i596_tx_timeout()
1056 	DEB(DEB_STARTTX,printk(KERN_DEBUG "%s: i596_start_xmit(%x,%p) called\n",  in i596_start_xmit()
1094 		DEB(DEB_TXADDR,print_eth(skb->data, "tx-queued"));  in i596_start_xmit()
1177 	DEB(DEB_PROBE,printk(KERN_INFO "%s: 82596 at %#3lx,", dev->name, dev->base_addr));  in i82596_probe()
1180 		DEB(DEB_PROBE,printk(" %2.2X", eth_addr[i]));  in i82596_probe()
1183 	DEB(DEB_PROBE,printk(" IRQ %d.\n", dev->irq));  in i82596_probe()
1185 	DEB(DEB_PROBE,printk(KERN_INFO "%s", version));  in i82596_probe()
1194 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%zd bytes), "  in i82596_probe()
1258 	DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt, IRQ %d, status %4.4x.\n",  in i596_interrupt()
1268 			DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt completed command.\n", dev->name));  in i596_interrupt()
1270 …DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt command unit inactive %x.\n", dev->name, status…  in i596_interrupt()
1275 			DEB(DEB_STATUS,printk(KERN_DEBUG "cmd_head->status = %04x, ->command = %04x\n",  in i596_interrupt()
1287 					DEB(DEB_TXADDR,print_eth(skb->data, "tx-done"));  in i596_interrupt()
1312 					DEB(DEB_TDR,printk(KERN_INFO "%s: link ok.\n", dev->name));  in i596_interrupt()
1321 					DEB(DEB_TDR,printk(KERN_INFO "%s: Time %d.\n", dev->name, status & 0x07ff));  in i596_interrupt()
1347 			DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt received a frame.\n", dev->name));  in i596_interrupt()
1352 …DEB(DEB_ERRORS,printk(KERN_ERR "%s: i596 interrupt receive unit inactive, status 0x%x\n", dev->nam…  in i596_interrupt()
1382 	DEB(DEB_INTS,printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name));  in i596_interrupt()
1395 	DEB(DEB_INIT,printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n",  in i596_close()
1407 	DEB(DEB_STRUCT,i596_display_data(dev));  in i596_close()
1446 	DEB(DEB_MULTI,printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",  in set_multicast_list()
1499 				DEB(DEB_MULTI,printk(KERN_INFO "%s: Adding address %pM\n",  in set_multicast_list()