Lines Matching +full:boot +full:- +full:partitions

1 # SPDX-License-Identifier: GPL-2.0-only
11 	  This provides partitions parser for devices based on BCM47xx
24 	tristate "Broadcom's U-Boot partition parser"
27 	  Broadcom uses a custom way of storing U-Boot environment variables.
28 	  They are placed inside U-Boot partition itself at unspecified offset.
49 	  <mtddef>  := <mtd-id>:<partdef>[,<partdef>]
51 	  <mtd-id>  := unique id used in mapping driver/device
52 	  <size>    := standard linux memsize OR "-" to denote all
62 	  1 flash resource (mtd-id "sa1100"), with 1 single writable partition:
63 	  mtdparts=sa1100:-
65 	  Same flash, but 2 named partitions, the first one being read-only:
66 	  mtdparts=sa1100:256k(ARMboot)ro,-(root)
85 	  This provides partitions parser for BCM4908 family devices
86 	  that can have multiple "firmware" partitions. It takes care of
94 	  This provides partitions parser for Linksys devices based on Broadcom
96 	  two "firmware" partitions. Currently used firmware has to be detected
100 	tristate "Parser for BCM963XX Image Tag format partitions"
106 	  and rootfs partitions.
108 	  header and creates up to two partitions, kernel and rootfs.
119 	  register MTD 'partitions' corresponding to each image detected,
127 	tristate "TP-Link Safeloader partitions parser"
130 	  TP-Link home routers use flash partitions to store various data. Info
131 	  about flash space layout is stored in a partitions table using a
132 	  custom ASCII-based format.
135 	  was named after it. Later it was adapted to CFE and U-Boot
138 	  This driver reads partitions table, parses it and creates MTD
139 	  partitions.
142 	tristate "Parser for TRX format partitions"
146 	  may contain up to 3/4 partitions (depending on the version).
147 	  This driver will parse TRX header and report at least two partitions:
154 	  This provides the read-only FTL logic necessary to read the partition
168 	  MTD 'partitions' corresponding to each image in the table, enable
180 	default "-1"
191 	  For example "2" means block number 2, "-1" means the last
192 	  block and "-2" means the penultimate block.
201 	bool "Force read-only for RedBoot system images"
203 	  If you need to force read-only for 'RedBoot', 'RedBoot Config' and
212 	  This provides support for parsing partitions from Shared Memory (SMEM)
219 	  This provides partitions table parser for devices with Sercomm