Lines Matching full:sdio

6 comment "MMC/SD/SDIO Host Controller Drivers"
255 	tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
260 	  This selects the Cadence SD/SDIO/eMMC driver.
401 	  Needed by some Fujitsu SoC for MMC / SD / SDIO support.
412 	  Needed by Milbeaut SoC for MMC / SD / SDIO support.
447 	  MMC 5.1 compliant and supports SD, eMMC and SDIO interfaces.
459 	  The controller supports the SD/SDIO Spec 3.x and eMMC Spec 4.5x
566 	  SD/MMC/SDIO devices.
608 	tristate "Marvell MMC/SD/SDIO host driver"
612 	  This selects the Marvell SDIO host driver.
613 	  SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
628 	tristate "MMC/SD/SDIO over SPI"
633 	  Some systems access MMC/SD/SDIO cards using a SPI controller
634 	  instead of using a "native" MMC/SD/SDIO controller.  This has a
636 	  advantage of working on many systems without dedicated MMC/SD/SDIO
652 	tristate "Spreadtrum SDIO host Controller"
658 	  This selects the SDIO Host Controller in Spreadtrum
669 	tristate "Renesas SDHI SD/SDIO controller support"
674 	  This provides support for the SDHI SD/SDIO controller found in
678 	tristate "DMA for SDHI SD/SDIO controllers using SYS-DMAC"
682 	  This provides DMA support for SDHI SD/SDIO controllers
687 	tristate "DMA for SDHI SD/SDIO controllers using on-chip bus mastering"
692 	  This provides DMA support for SDHI SD/SDIO controllers
859 	tristate "VUB300 USB to SDIO/SD/MMC Host Controller support"
864 	  The VUB300 is a USB-SDIO Host Controller Interface chip
865 	  that enables the host computer to use SDIO/SD/MMC cards
869 	  USB to SDIO/SD/MMC adapters and embedded on some motherboards.
872 	  to single and multifunction SDIO cards.
874 	  Some SDIO cards will need a firmware file to be loaded and
897 	  CSR boards with this device include: USB<>SDIO (M1985v2),
900 	  Note: These controllers only support SDIO cards and do not
915 	tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
918 	  This selects support for the Renesas USDHI6ROL0 SD/SDIO
993 	  This is needed if support for any SD/SDIO/MMC devices is required.
1008 	tristate "Broadcom SDIO/SD/MMC support"
1014 	  This selects support for the SDIO/SD/MMC Host Controller on
1020 	tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver"
1023 	  This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
1037 	  supports SD/MMC/SDIO devices.
1053 	  supports SD/MMC/SDIO devices.