Kconfig - OpenGrok cross reference for /openbmc/linux/drivers/mfd/Kconfig

52 	  linear regulators, along with a complete ActivePath battery
69 	  To compile this driver as a module, choose M here: the module will be
100 	  The ams AS3722 is a compact system PMU suitable for mobile phones,
103 	  over current monitoring, GPIOs, ADC and a watchdog.
131 	  Select this to get support for AT91 USART IP. This is a wrapper
133 	  can be used at a time. The choice is done at boot time by the probe
134 	  function of this MFD driver according to a device tree property.
141 	  Select this to get support for Atmel Flexcom. This is a wrapper
142 	  which embeds a SPI controller, a I2C controller and a USART. Only
143 	  one function can be used at a time. The choice is done at boot time
144 	  by the probe function of this MFD driver according to a device tree
181 	  This driver can also be built as a module. If so, the module
212 	  (builtin) and not a module, as the OpRegion must be available as
237 	  To compile this driver as a module, choose M here: the module will be
298 	  This driver controls a Maxim 5970/5978 switch via I2C bus.
299 	  The MAX5970/5978 is a smart switch with no output regulation, but
342 	  Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
343 	  ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
385 	  a Power Management IC. This driver provides common support for
525 	  This driver can also be built as a module. If so, the module will be
534 	  i.MX25 processors. They consist of a conversion queue for general
535 	  purpose ADC and a queue for Touchscreens.
564 	  We communicate with the Hi6421v600 via a SPMI bus.
584 	  in a single PCI device. It splits the 2 IO devices to
586 	  The GPIO exports a total amount of 8 interrupt-capable GPIOs.
621 	  This option is a bool as it provides an ACPI OpRegion which must be
648 	  This option is a bool as it provides an ACPI OpRegion which must be
665 	  This option is a bool as it provides an ACPI OpRegion which must be
712 	  Controller) on Intel Broxton and Apollo Lake. The PMC is a
724 	  AT90LS8535 microcontroller flashed with a special iPAQ
737 	  To compile this driver as a module, choose M here: the module will
746 	  carrier board. This device is a PCI to MODULbus bridge which may
759 	  This driver can also be built as a module. If so, the module
877 	  This is a companion Power Management IC with Flash, Haptic, Charger,
891 	  This is a Power Management IC with 4 buck regulators, 9
919 	  a Power Management IC. This driver provides common support for
929 	  a Power Management IC. This driver provides common support for
940 	  This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
953 	  National Semiconductor LP3974. This is a Power Management IC.
979 	  It consists of a single cell battery charger with ADC monitoring, RGB
984 	  This driver can also be built as a module. If so, the module
993 	  a Power Management IC. This driver provides common support for
1003 	  which is a Board Management Controller connected to the I2C bus.
1009 	  This driver can also be built as a module. If so the module
1018 	  Ocelot is a family of networking chips that support multiple ethernet
1028 	  To compile this driver as a module, choose M here: the module will be
1049 	  It is used on many Motorola phones and tablets as a PMIC.
1062 	  have a driver.
1083 	  Retu and Tahvo are a multi-function devices found on Nokia
1120 	  This is required if your board has a PM8xxx and uses its features,
1123 	  Say M here if you want to include support for PM8xxx chips as a
1124 	  module. This will build a module called "pm8xxx-core".
1137 	  Say M here if you want to include support for the Qualcomm RPM as a
1138 	  module. This will build a module called "qcom_rpm".
1153 	  series as a module.  The module will be called "qcom-spmi-pmic".
1283 	  To compile this driver as a module, choose M here: the
1286 	  on this driver so building this as a module might require proper
1299 	  To compile this driver as a module, choose M here: the
1308 	  This driver creates a single register map with the intention for it
1332 	  companion chip. This device is a multifunction device which may
1334 	  asynchronous serial ports, audio functions, and a dual display video
1355 	  This driver can also be built as a module.  If so, the module
1369 	  function (such as RTC, Typec, indicator and so on) in a single chip.
1417 	  through a register map.
1493 	  To compile this driver as a module, choose M here: the
1505 	  general usage such like a GPIO controller and a PWM controller.
1556 	  This option enables a driver for the TP61050/TPS61052
1559 	  also contains a GPIO pin.
1571 	  This driver can also be built as a module.  If so, the module
1583 	  This driver can also be built as a module.  If so, the module
1629 	  This driver can also be built as a module.  If so, the module
1643 	  This driver can also be built as a module. If so, the module
1657 	  This driver can also be built as a module. If so, the module
1672 	  This driver can also be built as a module.  If so, the module
1686 	  This driver can also be built as a module. If so, the module
1701 	  This driver can also be built as a module.  If so, the module
1756 	  This driver can also be built as a module.  If so, the module
1769 	  This driver can also be built as a module.  If so, the module
1784 	  boards, providing power management, RTC, GPIO, keypad, a
1794 	  which have a separate driver; some are control signals, such
1799 	  or reset when a sleep, wakeup or warm reset event occurs.
1859 	This is the core driver for the timberdale FPGA. This device is a
2019 	  The WM8994 is a highly integrated hi-fi CODEC designed for
2033 	  The WM9705, WM9712 and WM9713 is a highly integrated hi-fi CODEC
2035 	  it has on board GPIO and a touchscreen functionality which is
2075 	  has 5 bucks, 7 LDOs, and a boost for driving LEDs. Both ICs provide
2076 	  also a single-cell linear charger, a Coulomb counter, a real-time
2077 	  clock (RTC), GPIOs and a 32.768 kHz clock gate.
2102 	  To compile this driver as a module, choose M here: the
2129 	  To compile this driver as a module, choose M here: the
2214 	  PM8008 PMIC chip. PM8008 is a dedicated camera PMIC that integrates
2216 	  support functions into a single IC. This driver provides common
2271 	  functions on such a card, but provides necessary infrastructure
2274 	  If you have an SGI Origin, Octane, or a PCI IOC3 card,