Kconfig - OpenGrok cross reference for /openbmc/linux/drivers/leds/Kconfig

13 	  LEDs from both userspace and optionally, by kernel events (triggers).
20 	  This option enables the LED sysfs class in /sys/class/leds.  You'll
21 	  need this to do anything useful with LEDs.  If unsure, say Y.
27 	  This option enables the flash LED sysfs class in /sys/class/leds.
28 	  It wraps LED Class and adds flash LEDs specific sysfs attributes
37 	  This option enables the multicolor LED sysfs class in /sys/class/leds.
40 	  for multicolor LEDs that are grouped together. This class is not
41 	  intended for single color LEDs. It can be built as a module.
48 	  for LED sysfs class devices under /sys/class/leds.
70 	  will be called leds-an30259a.
77 	  This driver makes the PC Engines APU1 front panel LEDs
84 	  module will be called leds-apu.
92 	  LEDs on Dell Wyse 3020 (Ariel) board via the KB3930 Embedded
104 	  an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
108 	  will be called leds-aw200xx.
119 	  will be called leds-aw2013.
127 	  This option enables support for LEDs connected to the BCM6328
136 	  This option enables support for LEDs connected to the BCM6358
144 	  This option enables support for charger and general purpose LEDs
148 	  will be called leds-cht-wcove.
156 	  This option enables support for LEDs offered by Motorola's
170 	  will be called leds-cr0014114.
183 	  will be called leds-el15203000.
192 	  This option enables basic support for the LEDs found on the front
193 	  side of CZ.NIC's Turris Omnia router. There are 12 RGB LEDs on the
222 	  This option enables support for the LEDs on National Semiconductor /
225 	  The LEDs can be controlled directly, through PWM input, or by the
235 	  This option enables support for LEDs connected to LM3642.
253 	  This option enables support for the LEDs on Sharp Locomo.
281 	tristate "LED Support for the WRAP series LEDs"
285 	  This option enables support for the PCEngines WRAP programmable LEDs.
299 	  This option enables support for the Cobalt Raq series LEDs.
308 	  LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
346 	tristate "LED Support for GPIO connected LEDs"
350 	  This option enables support for the LEDs connected to GPIO
351 	  outputs. To be useful the particular board must have LEDs
352 	  and they must be connected to the GPIO lines.  The LEDs must be
361 	  This option enables support for LEDs connected to the National
366 	  module will be called leds-lp3944.
375 	  This option enables support for LEDs connected to the Texas
379 	  module will be called leds-lp3952.
390 	  module will be called leds-lp50xx.
452 	  This option enables support for the Keyboard LEDs on the LP8788 PMIC.
461 	  This option enables support for the display cluster LEDs
471 	  programs through the LEDs subsystem. This LED has three
475 	  or through /sys/class/leds/clevo::mail/brightness. As this LED
494 	  module will be called leds-clevo-mail.
501 	  This option enables support for LEDs connected to PCA955x
521 	  This option enables support for LEDs connected to the PCA963x
530 	  This option enables support for LEDs connected to PCA995x
535 	tristate "LED support for status LEDs on WM831x PMICs"
539 	  This option enables support for the status LEDs of the WM831x
547 	  This option enables support for LEDs driven by the Wolfson
559 	tristate "Dialog DA9052/DA9053 LEDS"
572 	  which can be used to control up to four LEDs.
579 	  This option enables support for pwm driven LEDs
586 	  This option enables support for regulator driven LEDs.
600 	  be called leds-bd2606mvv.
618 	  drive or power LEDs on the front panel. Using this driver
626 	  This option enables support for LEDs driven by a Linear Technology
639 	  be called leds-adp5520.
650 	tristate "LED support for Network Space v2 GPIO LEDs"
655 	  This option enables support for the dual-GPIO LEDs found on the
664 	tristate "LED support for Big Network series LEDs"
670 	  This option enables support for LEDs found on the LaCie 2Big
671 	  and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
678 	  This option enables support for LEDs connected to TC6507
694 	  LEDs driver for MAX77650 family of PMICs from Maxim Integrated.
708 	  This option enables support for LEDs connected to LM3554
715 	  This option enables support for the LEDs on the Bachmann OT200.
716 	  Say Y to enable LEDs on the Bachmann OT200.
722 	  Say Y here to include support for the MEN 14F021P00 BMC LEDs.
725 	  will be called leds-menf21bmc.
732 	  This option enables support for LEDs connected to ISSI IS31FL319x
737 	  called leds-is31fl319x.
753 	  LEDs.
756 	  called leds-sc27xx-bltc.
774 	  This option enables support for the system LEDs present on
777 	  will be called leds-powernv.
780 	bool "LED support for LEDs on system controllers"
785 	  This option enables support for the LEDs on syscon type
802 	  This option enables support for the LEDs on the Mellanox
809 	  This option enables support for the LEDs on the Mellanox Ethernet and
812 	  module, choose 'M' here: the module will be called leds-mlxreg.
818 	  This option enables support for userspace LEDs. Say 'y' to enable this
827 	  This option enables support for the User1 and User2 LEDs on NI
831 	  will be called leds-nic78bx.
874 	  It is a single boost converter primarily for white LEDs and
882 	  This option enables support for the Red and White LEDs of
886 	  will be called leds-ip30.
895 source "drivers/leds/blink/Kconfig"
898 source "drivers/leds/flash/Kconfig"
901 source "drivers/leds/rgb/Kconfig"
904 source "drivers/leds/trigger/Kconfig"
907 source "drivers/leds/simple/Kconfig"