Kconfig - OpenGrok cross reference for /openbmc/linux/drivers/input/touchscreen/Kconfig

8 	  Say Y here, and a list of supported touchscreens will be displayed.
19 	  Say Y here if you have a 88PM860x PMIC and want to enable
24 	  To compile this driver as a module, choose M here: the
32 	  Say Y here if you have a touchscreen interface using the
43 	  To compile this driver as a module, choose M here: the
50 	  Say Y here if you have a touchscreen interface using the
56 	  To compile this driver as a module, choose M here: the
62 	  Say Y here if you want to support a touchscreen interface using
67 	  To compile this driver as a module, choose M here: the
75 	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
77 	  To compile this driver as a module, choose M here: the
85 	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
89 	  To compile this driver as a module, choose M here: the
98 	  Say Y here if you want to use the generic ADC
103 	  To compile this driver as a module, choose M here: the
110 	  Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
115 	  To compile this driver as a module, choose M here: the
123 	  Say Y here if you have Atmel mXT series I2C touchscreen,
128 	  To compile this driver as a module, choose M here: the
137 	  Say Y here if you want support to output data from the T37
145 	  Say Y here if you have a AUO display with in-cell touchscreen
150 	  To compile this driver as a module, choose M here: the
157 	  Say Y here if you have a bu21013 touchscreen connected to
162 	  To compile this driver as a module, choose M here: the
169 	  Say Y here if you have a Rohm BU21029 touchscreen controller
174 	  To compile this driver as a module, choose M here: the
183 	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
187 	  To compile this driver as a module, choose M here: the
194 	  Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
198 	  To compile this driver as a module, choose M here: the
205 	  Say Y here if you have a Cypress CY8CTMA140 capacitive
210 	  To compile this driver as a module, choose M here: the
218 	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
223 	  To compile this driver as a module, choose M here: the
229 	  Say Y here if you have a touchscreen using controller from
236 	  To compile this driver as a module, choose M here: the
243 	  Say Y here if the touchscreen is connected via I2C bus.
245 	  To compile this driver as a module, choose M here: the
252 	  Say Y here if the touchscreen is connected via SPI bus.
254 	  To compile this driver as a module, choose M here: the
263 	  Say Y here if you have a Cypress Gen4 touchscreen.
267 	  To compile this driver as a module, choose M here.
273 	  Say Y here if the touchscreen is connected via I2C bus.
275 	  To compile this driver as a module, choose M here: the
282 	  Say Y here if the touchscreen is connected via SPI bus.
284 	  To compile this driver as a module, choose M here: the
296 	  Say Y here if you have a Cypress Gen5 touchscreen.
300 	  To compile this driver as a module, choose M here: the
308 	  Say Y here to enable the support for the touchscreen found
313 	  To compile this driver as a module, choose M here: the
320 	  Say Y here to support the touchscreen found on Dialog Semiconductor
325 	  To compile this driver as a module, choose M here: the
332 	  Say Y here if you have a Dynapro serial touchscreen connected to
337 	  To compile this driver as a module, choose M here: the
344 	  Say Y here if you have a Hampshire serial touchscreen connected to
349 	  To compile this driver as a module, choose M here: the
356 	  Say Y here to enable support for I2C connected EETI touch panels.
358 	  To compile this driver as a module, choose M here: the
365 	  Say Y here to enable support for I2C connected EETI
368 	  To compile this driver as a module, choose M here: the
375 	  Say Y here to enable support for serial connected EETI
378 	  To compile this driver as a module, choose M here: the
385 	  Say Y here to enable support for I2C connected EETI
388 	  To compile this driver as a module, choose M here: the
395 	  Say Y here if you have the Fujitsu touchscreen (such as one
401 	  To compile this driver as a module, choose M here: the
409 	  Say Y here if you have the Goodix touchscreen (such as one
416 	  To compile this driver as a module, choose M here: the
423 	  Say Y here if you have a touchscreen using HiDeep.
427 	  To compile this driver as a module, choose M here : the
434 	  Say Y here if you have a touchscreen using Hycon hy46xx
438 	  To compile this driver as a module, choose M here: the
445 	  Say Y here if you have a touchscreen using a Hynitron
450 	  To compile this driver as a module, choose M here: the
458 	  Say Y here if you have a ILI210X based touchscreen
466 	  To compile this driver as a module, choose M here: the
473 	  Say Y here if you have touchscreen with ILITEK touch IC,
478 	  To compile this driver as a module, choose M here: the
485 	  Say Y here if you want to add support for the IPROC touch
490 	  To compile this driver as a module, choose M here: the
501 	  To compile this driver as module, choose M here: the
508 	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
513 	  To compile this driver as a module, choose M here: the
520 	  Say Y here if you have an Elan eKTF2127 touchscreen
525 	  To compile this driver as a module, choose M here: the
532 	  Say Y here if you have an Elan eKTH I2C touchscreen
537 	  To compile this driver as a module, choose M here: the
544 	  Say Y here if you have an Elo serial touchscreen connected to
549 	  To compile this driver as a module, choose M here: the
556 	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
561 	  To compile this driver as a module, choose M here: the
568 	  Say Y here if you want to use the I2C version of the Wacom
573 	  To compile this driver as a module, choose M here: the module
580 	  Say Y here if you have a LPC32XX device and want
583 	  To compile this driver as a module, choose M here: the
590 	  Say Y here if you have a MAX11801 based touchscreen
595 	  To compile this driver as a module, choose M here: the
602 	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
607 	  To compile this driver as a module, choose M here: the
614 	  Say Y here if you have the MELFAS MMS114 touchscreen controller
619 	  To compile this driver as a module, choose M here: the
626 	  Say Y here if you have a MELFAS MIP4 Touchscreen device.
630 	  To compile this driver as a module, choose M here:
638 	  Say Y here if you have an I2C touchscreen using MStar msg2638.
642 	  To compile this driver as a module, choose M here: the
649 	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
654 	  To compile this driver as a module, choose M here: the
661 	  Say Y here if you have a Novatek NT11205 touchscreen.
664 	  To compile this driver as a module, choose M here: the
671 	  Say Y here if you have an Imagis IST30xxC touchscreen.
674 	  To compile this driver as a module, choose M here: the
681 	  Say Y here if you have a Freescale i.MX6UL, and want to
686 	  To compile this driver as a module, choose M here: the
693 	  Say Y here if you have an iNexio serial touchscreen connected to
698 	  To compile this driver as a module, choose M here: the
705 	  Say Y here if you have the ICS MicroClock MK712 touchscreen
710 	  To compile this driver as a module, choose M here: the
717 	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
720 	  To compile this driver as a module, choose M here: the
727 	  Say Y here if you have a HP Jornada 710/720/728 and want
730 	  To compile this driver as a module, choose M here: the
737 	  Say Y here to enable support for the touchscreen attached to
742 	  To compile this driver as a module, choose M here: the
749 	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
754 	  To compile this driver as a module, choose M here: the
761 	  Say Y here if you have a Penmount serial touchscreen connected to
766 	  To compile this driver as a module, choose M here: the
774 	  Say Y here if you have an EDT "Polytouch" touchscreen based
780 	  To compile this driver as a module, choose M here: the
787 	  Say Y here if you have the official Raspberry Pi 7 inch screen on
792 	  To compile this driver as a module, choose M here: the
799 	  Say Y here to enable MIGO-R touchscreen support.
803 	  To compile this driver as a module, choose M here: the
810 	  Say Y here if you have a Touchright serial touchscreen connected to
815 	  To compile this driver as a module, choose M here: the
822 	  Say Y here if you have a Touchwin serial touchscreen connected to
827 	  To compile this driver as a module, choose M here: the
834 	  Say Y here if you have 4/5/8 wire touchscreen controller
839 	  To compile this driver as a module, choose M here: the
846 	  Say Y here if you have a pixcir i2c touchscreen
851 	  To compile this driver as a module, choose M here: the
858 	  Say Y here if you have a Weida WDT87XX I2C touchscreen
863 	  To compile this driver as a module, choose M here: the
873 	  To compile this driver as a module, choose M here: the
880 	  Say Y here if you have a Wolfson Microelectronics WM97xx
887 	  To compile this driver as a module, choose M here: the
895 	  Say Y here to enable support for the Wolfson Microelectronics
903 	  Say Y here to enable support for the Wolfson Microelectronics
911 	  Say Y here to enable support for the Wolfson Microelectronics
919 	  Say Y here for support for streaming mode with WM97xx touchscreens
924 	  To compile this driver as a module, choose M here: the
952 	  To compile this driver as a module, choose M here: the
959 	  Say Y here if you have a touchscreen connected to the low-resolution
962 	  To compile this driver as a module, choose M here: the module will be
971 	  To compile this driver as a module, choose M here: the
978 	  Say Y here if you have an Freescale MC13783 PMIC on your
983 	  To compile this driver as a module, choose M here: the
1076 	  Say Y here if you have an EasyTouch USB Touch controller.
1083 	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1087 	  To compile this driver as a module, choose M here: the
1096 	  Say Y here if you have a touchscreen on a TS-4800 board.
1103 	  To compile this driver as a module, choose M here: the
1110 	  Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1115 	  To compile this driver as a module, choose M here: the
1127 	  Say Y here if you have a TSC2004 based touchscreen.
1131 	  To compile this driver as a module, choose M here: the
1140 	  Say Y here if you have a TSC2005 based touchscreen.
1144 	  To compile this driver as a module, choose M here: the
1151 	  Say Y here if you have a TSC2007 based touchscreen.
1155 	  To compile this driver as a module, choose M here: the
1163 	  Saying Y here adds an iio interface to the tsc2007 which
1172 	  Say Y here if you have a Motorola EZX telephone and
1175 	  To compile this driver as a module, choose M here: the
1183 	  Say Y here if you have Raydium series I2C touchscreen,
1188 	  To compile this driver as a module, choose M here: the
1195 	  Say Y here if you have the Silead touchscreen connected to
1200 	  To compile this driver as a module, choose M here: the
1213 	  To compile this driver as a module, choose M here: the
1220 	  Say Y here if you want to support the Sitronix ST1232
1225 	  To compile this driver as a module, choose M here: the
1233 	  Say Y here if you want support for STMicroelectronics
1236 	  To compile this driver as a module, choose M here: the
1244 	  Say Y here if you want support for STMicroelectronics
1247 	  To compile this driver as a module, choose M here: the
1259 	  To compile this driver as a module, choose M here: the
1268 	  Say Y here if you want support for the Samsung SUR40 touchscreen
1271 	  To compile this driver as a module, choose M here: the
1279 	  Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1284 	  To compile this driver as a module, choose M here: the
1291 	  Say Y here if you have a Semtech SX8654 touchscreen controller.
1295 	  To compile this driver as a module, choose M here: the
1302 	  Say Y here if you have a TPS6507x based touchscreen
1307 	  To compile this driver as a module, choose M here: the
1314 	  Say Y here if you have a touchscreen using Zeitec ZET6223
1318 	  To compile this driver as a module, choose M here: the
1326 	  Say Y here if you have a touchscreen using the zforce
1331 	  To compile this driver as a module, choose M here: the
1339 	  Say Y here if you have a Colibri VF50 and plan to use
1344 	  To compile this driver as a module, choose M here: the
1351 	  Say Y here if you have a touchscreen using ROHM BU21023/24.
1355 	  To compile this driver as a module, choose M here: the
1365 	  To compile this driver as a module, choose M here: the
1375 	  To compile this driver as a module, choose M here: the
1382 	  Say Y here if you have a touchscreen using Zinitix bt541,
1387 	  To compile this driver as a module, choose M here: the
1395 	  Say Y here to enable support for Himax hx83112b touchscreens.
1399 	  To compile this driver as a module, choose M here: the