143 #define zpa2326_dbg(idev, fmt, ...)					\  macro
230 	zpa2326_dbg(indio_dev, "enabled");  in zpa2326_enable_device()
256 	zpa2326_dbg(indio_dev, "sleeping");  in zpa2326_sleep()
284 	zpa2326_dbg(indio_dev, "reset");  in zpa2326_reset_device()
314 	zpa2326_dbg(indio_dev, "one shot cycle started");  in zpa2326_start_oneshot()
344 	zpa2326_dbg(indio_dev, "powered on");  in zpa2326_power_on()
363 	zpa2326_dbg(indio_dev, "powered off");  in zpa2326_power_on()
382 	zpa2326_dbg(indio_dev, "powered off");  in zpa2326_power_off()
427 	zpa2326_dbg(indio_dev, "one shot mode setup @%dHz", freq->hz);  in zpa2326_config_oneshot()
492 	zpa2326_dbg(indio_dev, "FIFO cleared");  in zpa2326_clear_fifo()
567 		zpa2326_dbg(indio_dev, "cleared %d FIFO entries", cleared);  in zpa2326_dequeue_pressure()
617 	zpa2326_dbg(indio_dev, "filling raw samples buffer");  in zpa2326_fill_sample_buffer()
866 	zpa2326_dbg(indio_dev, "waiting for one shot completion interrupt");  in zpa2326_wait_oneshot_completion()
944 	zpa2326_dbg(indio_dev, "polling for one shot completion");  in zpa2326_poll_oneshot_completion()
1015 		zpa2326_dbg(indio_dev, "fetching raw pressure sample");  in zpa2326_fetch_raw_sample()
1029 		zpa2326_dbg(indio_dev, "fetching raw temperature sample");  in zpa2326_fetch_raw_sample()
1350 		zpa2326_dbg(indio_dev, "continuous mode stopped");  in zpa2326_set_trigger_state()
1373 		zpa2326_dbg(indio_dev, "continuous mode setup @%dHz",  in zpa2326_set_trigger_state()