Lines Matching defs:ft260_get_system_status_report

145 struct ft260_get_system_status_report {  struct
146 	u8 report;		/* FT260_SYSTEM_SETTINGS */
147 	u8 chip_mode;		/* DCNF0 and DCNF1 status, bits 0-1 */
148 	u8 clock_ctl;		/* 0 - 12MHz, 1 - 24MHz, 2 - 48MHz */
149 	u8 suspend_status;	/* 0 - not suspended, 1 - suspended */
150 	u8 pwren_status;	/* 0 - FT260 is not ready, 1 - ready */
151 	u8 i2c_enable;		/* 0 - disabled, 1 - enabled */
152 	u8 uart_mode;		/* 0 - OFF; 1 - RTS_CTS, 2 - DTR_DSR, */
154 	u8 hid_over_i2c_en;	/* 0 - disabled, 1 - enabled */
155 	u8 gpio2_function;	/* 0 - GPIO,  1 - SUSPOUT, */
157 	u8 gpioA_function;	/* 0 - GPIO, 3 - TX_ACTIVE, 4 - TX_LED */
158 	u8 gpioG_function;	/* 0 - GPIO, 2 - PWREN, */
160 	u8 suspend_out_pol;	/* 0 - active-high, 1 - active-low */
161 	u8 enable_wakeup_int;	/* 0 - disabled, 1 - enabled */
162 	u8 intr_cond;		/* Interrupt trigger conditions */
163 	u8 power_saving_en;	/* 0 - disabled, 1 - enabled */
164 	u8 reserved[10];