Kconfig - OpenGrok cross reference for /openbmc/linux/drivers/gpu/drm/panel/Kconfig

1 # SPDX-License-Identifier: GPL-2.0-only
16 	  Say Y here to enable support for the Asia Better Technology Ltd.
17 	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 	  and RG-99 handheld gaming consoles.
26 	  This driver supports the ARM Versatile panels connected to ARM
36 	  Say Y here if you want to enable support for the ASUS TMP5P5
45 	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46 	  as found in the YLM RS-97 handheld gaming console.
49 	tristate "Boe BF060Y8M-AJ0 panel"
54 	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
56 	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
65 	  Say Y here if you want to enable support for Boe Himax8279d
66 	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
68 	  the host and has a built-in LED backlight.
76 	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
94 	  This driver supports LVDS panels that don't require device-specific
96 	  backlight handling if the panel is attached to a backlight controller.
99 	tristate "support for simple panels (other than eDP ones)"
105 	  DRM panel driver for dumb non-eDP panels that need at most a regulator
106 	  and a GPIO to be powered up. Optionally a backlight can be attached so
121 	  DRM panel driver for dumb eDP panels that need at most a regulator and
122 	  a GPIO to be powered up. Optionally a backlight can be attached so
132 	  Say Y here if you want to enable support for the EBBG FT8719
134 	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
135 	  interface to the host.
143 	  Say Y here if you want to enable support for the Elida
144 	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
153 	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
154 	  4-lane 800x1280 MIPI DSI panel.
157 	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
162 	  Say Y if you want to enable support for panels based on the
163 	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
166 	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
171 	  Say Y if you want to enable support for panels based on the
173 	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
175 	  If M is selected the module will be called panel-himax-hx8394.
182 	  Say Y here if you want to enable support for Ilitek IL9322
183 	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
193 	  Say Y here if you want to enable support for Ilitek IL9341
198 	tristate "Ilitek ILI9881C-based panels"
203 	  Say Y if you want to enable support for panels based on the
211           Say Y here to enable support for the Innolux/Chimei EJ030NA
212           320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
221 	  Say Y here if you want to enable support for Innolux P079ZCA
222 	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
223 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
224 	  the host and has a built-in LED backlight.
227 	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
232 	  Say Y here if you want to enable support for Jadard JD9365DA-H3
233 	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
242 	  Say Y here if you want to enable support for JDI DSI video mode
253 	  Say Y here if you want to enable support for the JDI R63452
262 	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
264 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
265 	  the host, a built-in LED backlight and touch controller.
273 	  Say Y here if you want to enable support for Kingdisplay kd097d04
274 	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
275 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
276 	  the host and has a built-in LED backlight.
284 	  Say Y here if you want to enable support for Leadtek LTK050H3146W
285 	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
286 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
287 	  the host and has a built-in LED backlight.
295 	  Say Y here if you want to enable support for Kingdisplay kd097d04
296 	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
297 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
298 	  the host and has a built-in LED backlight.
310 	  Say Y here if you want to enable support for the LB035Q02 RGB panel
311 	  (found on the Gumstix Overo Palo35 board). To compile this driver as
319 	  Say Y here if you want to enable support for LG4573 RGB panel.
320 	  To compile this driver as a module, choose M here.
331 	  video data via DSI but commands via 9-bit SPI using DBI.
337 	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
338 	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
356 	  Say Y here if you want to enable support for the panels built
365 	  Say Y here if you want to enable support for the panels built
376 	  Say Y here if you want to enable the Novatek NT35560 display
387 	  Say Y here if you want to enable support for the panels built
398 	  Say Y here if you want to enable support for the panels built
408 	  Say Y here if you want to enable support for the panels built
418 	  Say Y here if you want to enable support for the panels built
422 	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
427 	  Say Y here if you want to enable support for the Mantix
428 	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
433 	tristate "Olimex LCD-OLinuXino panel"
439 	  The panel is used with different sizes LCDs, from 480x272 to
442 	  Say Y here if you want to enable support for Olimex Ltd.
443 	  LCD-OLinuXino panel.
451           Say Y here if you want to enable support for the panels built
460 	  Say Y here if you want to enable support for Orise Technology
464 	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
469 	  Say Y here if you want to enable support for One Stop Displays
470 	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
478 	  Say Y here if you want to enable support for Panasonic VVX10F034N00
479 	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
483 	tristate "Raspberry Pi 7-inch touchscreen panel"
486 	  Say Y here if you want to enable support for the Raspberry
487 	  Pi 7" Touchscreen.  To compile this driver as a module,
496 	  Say Y here if you want to enable support for Raydium RM67191 FHD
505 	  Say Y here if you want to enable support for Raydium RM68200
514 	  Say Y here if you want to enable support for Ronbo Electronics
518 	tristate "Samsung ATNA33XC20 eDP panel"
528 	  sequencing is non-standard.
531 	tristate "Samsung DB7430-based DPI panels"
536 	  Say Y here if you want to enable support for the Samsung
551 	  Say Y here if you want to enable support for the Samsung
555 	  GT-I8160 mobile phone.
558 	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
583 	  Say Y here if you want to enable support for Samsung S6E63M0
594 	  Say Y here if you want to be able to access the Samsung
602 	  Say Y here if you want to be able to access the Samsung
624 	  Say Y or M here if you want to enable support for the Samsung AMOLED
635 	  Say Y here if you want to enable support for the Seiko
644 	  Say Y here if you want to enable support for Sharp LQ101R1SX01
645 	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
646 	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
647 	  the host and has a built-in LED backlight.
649 	  To compile this driver as a module, choose M here: the module
650 	  will be called panel-sharp-lq101r1sx01.
656 	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
665 	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
674 	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
684 	  Say Y here if you want to enable support for the Sitronix
685 	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
689 	tristate "Sitronix ST7703 based MIPI touchscreen panels"
694 	  Say Y here if you want to enable support for Sitronix ST7703 based
695 	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
698 	  Touch input support is provided by the goodix driver and needs to be
706 	  Say Y here if you want to enable support for the Sitronix
714 	  Say Y here if you want to enable support for the Sony ACX565AKM
723 	  Say Y here if you want to enable support for the Sony Tama
733 	  Say Y here if you want to enable support for the Sony Tulip
743 	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
744 	  based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
745 	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
746 	  the host, a built-in LED backlight and touch controller.
754 	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
756 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
757 	  the host, a built-in LED backlight and touch controller.
764 	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
771 	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
779 	  Say Y here if you want to enable support for TPO TPG110
780 	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
788 	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
796 	  Say Y here if you want to enable support for Visionox
805 	  Say Y here if you want to enable support for Visionox
816 	  Say Y here if you want to enable support for Visionox
825 	  Say Y here if you want to enable support for the Widechips WS2401 DPI
827 	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
835 	  Say Y here if you want to enable support for the Xinpeng
836 	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI