76 	 * fully operational, but have the danger of duplicate addresses  in btintel_check_bdaddr()
577 			/* If image type is Operational firmware (0x03), then  in btintel_parse_version_tlv()
589 			/* If image type is Operational firmware (0x03), then  in btintel_parse_version_tlv()
1114 	 * mode or is running operational firmware. The value 0x06 identifies  in btintel_download_firmware()
1115 	 * the bootloader and the value 0x23 identifies the operational  in btintel_download_firmware()
1119 	 * to bootloader when operational so the new firmware can be loaded.  in btintel_download_firmware()
1153 	 * mode or is running operational firmware. The value 0x01 identifies  in btintel_download_fw_tlv()
1154 	 * the bootloader and the value 0x03 identifies the operational  in btintel_download_fw_tlv()
1158 	 * to bootloader when operational so the new firmware can be loaded.  in btintel_download_fw_tlv()
1841 	 * is done by the operational firmware sending bootup notification.  in btintel_boot()
1843 	 * Booting into operational firmware should not take longer than  in btintel_boot()
1898 	 * mode or is running operational firmware. The value 0x06 identifies  in btintel_download_fw()
1899 	 * the bootloader and the value 0x23 identifies the operational  in btintel_download_fw()
1902 	 * When the operational firmware is already present, then only  in btintel_download_fw()
1945 	 * also be no valid address for the operational firmware.  in btintel_download_fw()
2029 	/* Before switching the device into operational mode and with that  in btintel_download_fw()
2072 	/* controller is already having an operational firmware */  in btintel_bootloader_setup()
2088 		/* Once the device is running in operational mode, it needs to  in btintel_bootloader_setup()
2147 	 * mode or is running operational firmware. The value 0x03 identifies  in btintel_prepare_fw_download_tlv()
2148 	 * the bootloader and the value 0x23 identifies the operational  in btintel_prepare_fw_download_tlv()
2151 	 * When the operational firmware is already present, then only  in btintel_prepare_fw_download_tlv()
2221 	/* Before switching the device into operational mode and with that  in btintel_prepare_fw_download_tlv()
2546 	/* check if controller is already having an operational firmware */  in btintel_bootloader_setup_tlv()
2557 	/* Once the device is running in operational mode, it needs to  in btintel_bootloader_setup_tlv()
2758 	 * to bootloader mode and are not populated in operational mode  in btintel_setup_combined()
2788 		 * the operational firmware supports both old and TLV based  in btintel_setup_combined()
2958 				/* When switching to the operational firmware  in btintel_recv_event()