152 #define DPRINT(format, args...) \  macro
158 	do { if ((test) & FD_DEBUG) DPRINT(fmt, ##args); } while (0)
161 	do { if (0) DPRINT(fmt, ##args); } while (0)
648 		DPRINT("%s: timeout handler died.  %s\n", func, message);  in is_alive()
684 		DPRINT("reschedule timeout %s\n", message);  in __reschedule_timeout()
738 		DPRINT("WARNING disk change called early\n");  in disk_change()
741 		DPRINT("probing disk change on unselected drive\n");  in disk_change()
742 		DPRINT("drive=%d fdc=%d dor=%x\n", drive, FDC(drive),  in disk_change()
769 				DPRINT("Disk type is undefined after disk change\n");  in disk_change()
909 		DPRINT("FDC access conflict!\n");  in unlock_fdc()
1029 		DPRINT("disk removed during i/o\n");  in fd_watchdog()
1126 		DPRINT("Getstatus times out (%x) on fdc %d\n", status, fdc);  in wait_til_ready()
1151 		DPRINT("Unable to send byte %x to FDC. Fdc=%x Status=%x\n",  in output_byte()
1180 		DPRINT("get result error. Fdc=%d Last status=%x Read bytes=%d\n",  in result()
1219 			DPRINT("Invalid data rate for perpendicular mode!\n");  in perpendicular_mode()
1239 		DPRINT("perpendicular mode not supported by this FDC.\n");  in perpendicular_mode()
1392 	DPRINT("");  in print_errors()
1433 		DPRINT("-- FDC reply error\n");  in interpret_errors()
1445 			DPRINT("Drive is write protected\n");  in interpret_errors()
1455 				DPRINT("Over/Underrun - retrying\n");  in interpret_errors()
1465 		DPRINT("Invalid FDC command given!\n");  in interpret_errors()
1469 		DPRINT("Abnormal termination caused by polling\n");  in interpret_errors()
1545 		DPRINT("seek failed\n");  in seek_interrupt()
1704 	DPRINT("%s ", message);  in print_result()
1885 		DPRINT("floppy timeout called\n");  in floppy_shutdown()
2351 		DPRINT("long rw: %x instead of %lx\n",  in rw_interrupt()
2392 			DPRINT("Auto-detected floppy type %s in fd%d\n",  in rw_interrupt()
2446 		DPRINT("in copy buffer\n");  in copy_buffer()
2472 			DPRINT("buffer overrun in copy buffer %d\n",  in copy_buffer()
2496 		DPRINT("weirdness: remaining %d\n", remaining >> 9);  in copy_buffer()
2561 		DPRINT("%s: unknown command\n", __func__);  in make_raw_rw_request()
2691 			DPRINT("internal error offset !=0 on write\n");  in make_raw_rw_request()
2711 		DPRINT("fractionary current count b=%lx s=%lx\n",  in make_raw_rw_request()
2735 		DPRINT("buffer overrun in schedule dma\n");  in make_raw_rw_request()
2747 		DPRINT("zero dma transfer attempted from make_raw_request\n");  in make_raw_rw_request()
2805 		DPRINT("disk absent or changed during operation\n");  in redo_fd_request()
2813 				DPRINT("no autodetectable formats\n");  in redo_fd_request()
3417 		DPRINT("obsolete eject ioctl\n");  in fd_locked_ioctl()
3418 		DPRINT("please use floppycontrol --eject\n");  in fd_locked_ioctl()
3974 		DPRINT("floppy_release with fd_ref == 0");  in floppy_release()
4030 			DPRINT("Unable to allocate DMA memory\n");  in floppy_open()
4327 	DPRINT("%s flag 0x%x\n", param2 ? "Setting" : "Clearing", param);  in floppy_set_flags()
4346 	DPRINT("Assuming %s floppy hardware\n", param ? "standard" : "broken");  in daring()
4354 		DPRINT("wrong number of parameters for CMOS\n");  in set_cmos()
4359 		DPRINT("bad drive for set_cmos\n");  in set_cmos()
4367 	DPRINT("setting CMOS code to %d\n", ints[2]);  in set_cmos()
4426 					DPRINT("%s=%d\n", str, param);  in floppy_setup()
4434 		DPRINT("unknown floppy option [%s]\n", str);  in floppy_setup()
4436 		DPRINT("allowed options are:");  in floppy_setup()
4441 		DPRINT("botched floppy option\n");  in floppy_setup()
4442 	DPRINT("Read Documentation/admin-guide/blockdev/floppy.rst\n");  in floppy_setup()
4711 		DPRINT("no floppy controllers found\n");  in do_floppy_init()
4813 			DPRINT("Floppy io-port 0x%04lx in use\n",  in floppy_request_regions()
4841 		DPRINT("Unable to grab IRQ%d for the floppy driver\n",  in floppy_grab_irq_and_dma()
4847 		DPRINT("Unable to grab DMA%d for the floppy driver\n",  in floppy_grab_irq_and_dma()