dts/starfive/jh7110-starfive-visionfive-2.dtsi

1 // SPDX-License-Identifier: GPL-2.0 OR MIT
7 /dts-v1/;
9 #include "jh7110-pinfunc.h"
10 #include <dt-bindings/gpio/gpio.h>
26 		stdout-path = "serial0:115200n8";
30 		timebase-frequency = <4000000>;
38 	gpio-restart {
39 		compatible = "gpio-restart";
46 	clock-frequency = <74250000>;
50 	clock-frequency = <125000000>;
54 	clock-frequency = <50000000>;
58 	clock-frequency = <125000000>;
62 	clock-frequency = <50000000>;
66 	clock-frequency = <297000000>;
70 	clock-frequency = <12288000>;
74 	clock-frequency = <192000>;
78 	clock-frequency = <12288000>;
82 	clock-frequency = <192000>;
86 	clock-frequency = <12288000>;
90 	clock-frequency = <24000000>;
94 	clock-frequency = <32768>;
98 	clock-frequency = <49152000>;
102 	phy-handle = <&phy0>;
103 	phy-mode = "rgmii-id";
107 		#address-cells = <1>;
108 		#size-cells = <0>;
109 		compatible = "snps,dwmac-mdio";
111 		phy0: ethernet-phy@0 {
118 	phy-handle = <&phy1>;
119 	phy-mode = "rgmii-id";
123 		#address-cells = <1>;
124 		#size-cells = <0>;
125 		compatible = "snps,dwmac-mdio";
127 		phy1: ethernet-phy@1 {
134 	clock-frequency = <100000>;
135 	i2c-sda-hold-time-ns = <300>;
136 	i2c-sda-falling-time-ns = <510>;
137 	i2c-scl-falling-time-ns = <510>;
138 	pinctrl-names = "default";
139 	pinctrl-0 = <&i2c0_pins>;
144 	clock-frequency = <100000>;
145 	i2c-sda-hold-time-ns = <300>;
146 	i2c-sda-falling-time-ns = <510>;
147 	i2c-scl-falling-time-ns = <510>;
148 	pinctrl-names = "default";
149 	pinctrl-0 = <&i2c2_pins>;
154 	clock-frequency = <100000>;
155 	i2c-sda-hold-time-ns = <300>;
156 	i2c-sda-falling-time-ns = <510>;
157 	i2c-scl-falling-time-ns = <510>;
158 	pinctrl-names = "default";
159 	pinctrl-0 = <&i2c5_pins>;
163 		compatible = "x-powers,axp15060";
165 		interrupt-controller;
166 		#interrupt-cells = <1>;
170 				regulator-boot-on;
171 				regulator-always-on;
172 				regulator-min-microvolt = <3300000>;
173 				regulator-max-microvolt = <3300000>;
174 				regulator-name = "vcc_3v3";
178 				regulator-always-on;
179 				regulator-min-microvolt = <500000>;
180 				regulator-max-microvolt = <1540000>;
181 				regulator-name = "vdd-cpu";
185 				regulator-boot-on;
186 				regulator-always-on;
187 				regulator-min-microvolt = <1800000>;
188 				regulator-max-microvolt = <1800000>;
189 				regulator-name = "emmc_vdd";
196 	clock-frequency = <100000>;
197 	i2c-sda-hold-time-ns = <300>;
198 	i2c-sda-falling-time-ns = <510>;
199 	i2c-scl-falling-time-ns = <510>;
200 	pinctrl-names = "default";
201 	pinctrl-0 = <&i2c6_pins>;
206 	max-frequency = <100000000>;
207 	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
208 	assigned-clock-rates = <50000000>;
209 	bus-width = <8>;
210 	cap-mmc-highspeed;
211 	mmc-ddr-1_8v;
212 	mmc-hs200-1_8v;
213 	non-removable;
214 	cap-mmc-hw-reset;
215 	post-power-on-delay-ms = <200>;
216 	pinctrl-names = "default";
217 	pinctrl-0 = <&mmc0_pins>;
218 	vmmc-supply = <&vcc_3v3>;
219 	vqmmc-supply = <&emmc_vdd>;
224 	max-frequency = <100000000>;
225 	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
226 	assigned-clock-rates = <50000000>;
227 	bus-width = <4>;
228 	no-sdio;
229 	no-mmc;
230 	broken-cd;
231 	cap-sd-highspeed;
232 	post-power-on-delay-ms = <200>;
233 	pinctrl-names = "default";
234 	pinctrl-0 = <&mmc1_pins>;
239 	#address-cells = <1>;
240 	#size-cells = <0>;
244 		compatible = "jedec,spi-nor";
246 		cdns,read-delay = <5>;
247 		spi-max-frequency = <12000000>;
248 		cdns,tshsl-ns = <1>;
249 		cdns,tsd2d-ns = <1>;
250 		cdns,tchsh-ns = <1>;
251 		cdns,tslch-ns = <1>;
254 			compatible = "fixed-partitions";
255 			#address-cells = <1>;
256 			#size-cells = <1>;
261 			uboot-env@f0000 {
267 			reserved-data@600000 {
275 	pinctrl-names = "default";
276 	pinctrl-0 = <&spi0_pins>;
282 		spi-max-frequency = <10000000>;
287 	i2c0_pins: i2c0-0 {
288 		i2c-pins {
295 			bias-disable; /* external pull-up */
296 			input-enable;
297 			input-schmitt-enable;
301 	i2c2_pins: i2c2-0 {
302 		i2c-pins {
309 			bias-disable; /* external pull-up */
310 			input-enable;
311 			input-schmitt-enable;
315 	i2c5_pins: i2c5-0 {
316 		i2c-pins {
323 			bias-disable; /* external pull-up */
324 			input-enable;
325 			input-schmitt-enable;
329 	i2c6_pins: i2c6-0 {
330 		i2c-pins {
337 			bias-disable; /* external pull-up */
338 			input-enable;
339 			input-schmitt-enable;
343 	mmc0_pins: mmc0-0 {
344 		 rst-pins {
348 			bias-pull-up;
349 			drive-strength = <12>;
350 			input-disable;
351 			input-schmitt-disable;
352 			slew-rate = <0>;
355 		mmc-pins {
366 			bias-pull-up;
367 			drive-strength = <12>;
368 			input-enable;
372 	mmc1_pins: mmc1-0 {
373 		clk-pins {
377 			bias-pull-up;
378 			drive-strength = <12>;
379 			input-disable;
380 			input-schmitt-disable;
381 			slew-rate = <0>;
384 		mmc-pins {
400 			bias-pull-up;
401 			drive-strength = <12>;
402 			input-enable;
403 			input-schmitt-enable;
404 			slew-rate = <0>;
408 	spi0_pins: spi0-0 {
409 		mosi-pins {
413 			bias-disable;
414 			input-disable;
415 			input-schmitt-disable;
418 		miso-pins {
422 			bias-pull-up;
423 			input-enable;
424 			input-schmitt-enable;
427 		sck-pins {
431 			bias-disable;
432 			input-disable;
433 			input-schmitt-disable;
436 		ss-pins {
440 			bias-disable;
441 			input-disable;
442 			input-schmitt-disable;
446 	uart0_pins: uart0-0 {
447 		tx-pins {
451 			bias-disable;
452 			drive-strength = <12>;
453 			input-disable;
454 			input-schmitt-disable;
455 			slew-rate = <0>;
458 		rx-pins {
462 			bias-disable; /* external pull-up */
463 			drive-strength = <2>;
464 			input-enable;
465 			input-schmitt-enable;
466 			slew-rate = <0>;
472 	pinctrl-names = "default";
473 	pinctrl-0 = <&uart0_pins>;
483 	cpu-supply = <&vdd_cpu>;
487 	cpu-supply = <&vdd_cpu>;
491 	cpu-supply = <&vdd_cpu>;
495 	cpu-supply = <&vdd_cpu>;