Lines Matching +full:hardware +full:- +full:driven
1 # SPDX-License-Identifier: GPL-2.0
37 bool "ePAPR para-virtualization support"
39 Enables ePAPR para-virtualization support for guests.
47 Support for running natively on the hardware, i.e. without
48 a hypervisor. This option is not user-selectable but should
65 bool "Device-tree based CPU feature discovery & setup"
97 The MPIC global timer is a hardware timer inside the
99 specified interval times out, the hardware timer generates
124 registers are used for inter-processor communication.
206 bool "On-chip CPU temperature sensor support"
209 G3 and G4 processors have an on-chip temperature sensor called the
210 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
211 temperature within 2-4 degrees Celsius. This option shows the current
212 on-die temperature in /proc/cpuinfo if the cpu supports it.
218 bool "Interrupt driven TAU driver (EXPERIMENTAL)"
221 The TAU supports an interrupt driven mode which causes an interrupt
224 a timer is used to re-check the temperature periodically.
232 The TAU hardware can compare the temperature to an upper and lower
235 either changing a lot, or the TAU hardware is broken (likely on some
249 Say Y here if you're going to use hardware that connects to the
298 bool "MPC8349E-mITX MCU driver"
302 Say Y here to enable soft power-off functionality on the Freescale
303 boards with the MPC8349E-mITX-compatible MCU chips. This driver will