dts/ti/k3-j721s2-som-p0.dtsi

1 // SPDX-License-Identifier: GPL-2.0
5  * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
8 /dts-v1/;
10 #include "k3-j721s2.dtsi"
11 #include <dt-bindings/gpio/gpio.h>
22 	reserved_memory: reserved-memory {
23 		#address-cells = <2>;
24 		#size-cells = <2>;
30 			no-map;
34 	mux0: mux-controller {
35 		compatible = "gpio-mux";
36 		#mux-state-cells = <1>;
37 		mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>;
40 	mux1: mux-controller {
41 		compatible = "gpio-mux";
42 		#mux-state-cells = <1>;
43 		mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
46 	transceiver0: can-phy0 {
49 		#phy-cells = <0>;
50 		max-bitrate = <5000000>;
55 	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
56 		pinctrl-single,pins = <
74 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
75 		pinctrl-single,pins = <
83 	main_i2c0_pins_default: main-i2c0-default-pins {
84 		pinctrl-single,pins = <
90 	main_mcan16_pins_default: main-mcan16-default-pins {
91 		pinctrl-single,pins = <
100 	pinctrl-names = "default";
101 	pinctrl-0 = <&wkup_i2c0_pins_default>;
102 	clock-frequency = <400000>;
105 		/* CAV24C256WE-GT3 */
113 	pinctrl-names = "default";
114 	pinctrl-0 = <&main_i2c0_pins_default>;
115 	clock-frequency = <400000>;
120 		gpio-controller;
121 		#gpio-cells = <2>;
122 		gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0",
131 	pinctrl-0 = <&main_mcan16_pins_default>;
132 	pinctrl-names = "default";
138 	pinctrl-names = "default";
139 	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
142 		compatible = "jedec,spi-nor";
144 		spi-tx-bus-width = <8>;
145 		spi-rx-bus-width = <8>;
146 		spi-max-frequency = <25000000>;
147 		cdns,tshsl-ns = <60>;
148 		cdns,tsd2d-ns = <60>;
149 		cdns,tchsh-ns = <60>;
150 		cdns,tslch-ns = <60>;
151 		cdns,read-delay = <4>;