dts/ti/k3-am625-phyboard-lyra-rdk.dts

1 // SPDX-License-Identifier: GPL-2.0
3  * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH
7  * https://www.phytec.com/product/phyboard-am62x
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/leds/common.h>
13 #include <dt-bindings/net/ti-dp83867.h>
14 #include "k3-am625.dtsi"
15 #include "k3-am62-phycore-som.dtsi"
18 	compatible = "phytec,am625-phyboard-lyra-rdk",
19 		     "phytec,am62-phycore-som", "ti,am625";
20 	model = "PHYTEC phyBOARD-Lyra AM625";
31 	can_tc1: can-phy0 {
33 		#phy-cells = <0>;
34 		max-bitrate = <5000000>;
35 		standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
39 		compatible = "gpio-keys";
41 		pinctrl-names = "default";
42 		pinctrl-0 = <&gpio_keys_pins_default>;
44 		key-home {
50 		key-menu {
58 		compatible = "gpio-leds";
59 		pinctrl-names = "default";
60 		pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>;
62 		led-1 {
64 			linux,default-trigger = "mmc0";
67 		led-2 {
69 			linux,default-trigger = "mmc1";
73 	vcc_3v3_mmc: regulator-vcc-3v3-mmc {
74 		compatible = "regulator-fixed";
75 		regulator-name = "VCC_3V3_MMC";
76 		regulator-min-microvolt = <3300000>;
77 		regulator-max-microvolt = <3300000>;
78 		regulator-always-on;
79 		regulator-boot-on;
84 	gpio_keys_pins_default: gpio-keys-default-pins {
85 		pinctrl-single,pins = <
90 	gpio_exp_int_pins_default: gpio-exp-int-default-pins {
91 		pinctrl-single,pins = <
96 	main_i2c1_pins_default: main-i2c1-default-pins {
97 		pinctrl-single,pins = <
103 	main_mcan0_pins_default: main-mcan0-default-pins {
104 		pinctrl-single,pins = <
110 	main_mmc1_pins_default: main-mmc1-default-pins {
111 		pinctrl-single,pins = <
122 	main_rgmii2_pins_default: main-rgmii2-default-pins {
123 		pinctrl-single,pins = <
139 	main_uart0_pins_default: main-uart0-default-pins {
140 		pinctrl-single,pins = <
146 	main_uart1_pins_default: main-uart1-default-pins {
147 		pinctrl-single,pins = <
155 	main_usb1_pins_default: main-usb1-default-pins {
156 		pinctrl-single,pins = <
161 	user_leds_pins_default: user-leds-default-pins {
162 		pinctrl-single,pins = <
169 	pinctrl-names = "default";
170 	pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
174 	phy-mode = "rgmii-rxid";
175 	phy-handle = <&cpsw3g_phy3>;
179 	cpsw3g_phy3: ethernet-phy@3 {
180 		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
182 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
183 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
188 	pinctrl-names = "default";
189 	pinctrl-0 = <&main_i2c1_pins_default>;
190 	clock-frequency = <400000>;
193 	gpio_exp: gpio-expander@21 {
194 		pinctrl-names = "default";
195 		pinctrl-0 = <&gpio_exp_int_pins_default>;
198 		interrupt-parent = <&main_gpio1>;
200 		#gpio-cells = <2>;
201 		gpio-controller;
202 		interrupt-controller;
203 		#interrupt-cells = <2>;
204 		gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN",
218 	pinctrl-names = "default";
219 	pinctrl-0 = <&main_mcan0_pins_default>;
225 	pinctrl-names = "default";
226 	pinctrl-0 = <&main_uart0_pins_default>;
231 	pinctrl-names = "default";
232 	pinctrl-0 = <&main_uart1_pins_default>;
238 	vmmc-supply = <&vcc_3v3_mmc>;
239 	vqmmc-supply = <&vddshv5_sdio>;
240 	pinctrl-names = "default";
241 	pinctrl-0 = <&main_mmc1_pins_default>;
242 	ti,driver-strength-ohm = <50>;
243 	disable-wp;
244 	no-1-8-v;
249 	ti,vbus-divider;
254 	ti,vbus-divider;
264 	pinctrl-names = "default";
265 	pinctrl-0 = <&main_usb1_pins_default>;