dts/rockchip/rk3368-lion.dtsi

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
15 		stdout-path = "serial0:115200n8";
18 	ext_gmac: gmac-clk {
19 		compatible = "fixed-clock";
20 		clock-frequency = <125000000>;
21 		clock-output-names = "ext_gmac";
22 		#clock-cells = <0>;
26 		compatible = "i2c-mux-gpio";
27 		#address-cells = <1>;
28 		#size-cells = <0>;
29 		i2c-parent = <&i2c1>;
30 		mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
35 			#address-cells = <1>;
36 			#size-cells = <0>;
42 			#address-cells = <1>;
43 			#size-cells = <0>;
48 		compatible = "i2c-mux-gpio";
49 		#address-cells = <1>;
50 		#size-cells = <0>;
51 		i2c-parent = <&i2c2>;
52 		mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
57 			#address-cells = <1>;
58 			#size-cells = <0>;
74 			#address-cells = <1>;
75 			#size-cells = <0>;
80 		compatible = "gpio-leds";
81 		pinctrl-names = "default";
82 		pinctrl-0 = <&module_led_pins>;
84 		module_led1: led-1 {
87 			linux,default-trigger = "heartbeat";
88 			panic-indicator;
91 		module_led2: led-2 {
94 			default-state = "off";
98 	vcc_sys: vcc-sys-regulator {
99 		compatible = "regulator-fixed";
100 		regulator-name = "vcc_sys";
101 		regulator-min-microvolt = <5000000>;
102 		regulator-max-microvolt = <5000000>;
103 		regulator-always-on;
104 		regulator-boot-on;
109 	cpu-supply = <&vdd_cpu>;
113 	cpu-supply = <&vdd_cpu>;
117 	cpu-supply = <&vdd_cpu>;
121 	cpu-supply = <&vdd_cpu>;
125 	cpu-supply = <&vdd_cpu>;
129 	cpu-supply = <&vdd_cpu>;
133 	cpu-supply = <&vdd_cpu>;
137 	cpu-supply = <&vdd_cpu>;
141 	bus-width = <8>;
142 	clock-frequency = <150000000>;
143 	mmc-hs200-1_8v;
144 	non-removable;
145 	vmmc-supply = <&vcc33_io>;
146 	vqmmc-supply = <&vcc_18>;
147 	pinctrl-names = "default";
148 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
153 	assigned-clocks = <&cru SCLK_MAC>;
154 	assigned-clock-parents = <&ext_gmac>;
156 	phy-supply = <&vcc33_io>;
157 	phy-mode = "rgmii";
158 	pinctrl-names = "default";
159 	pinctrl-0 = <&rgmii_pins>;
160 	snps,reset-active-low;
161 	snps,reset-delays-us = <0 10000 50000>;
162 	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
174 		interrupt-parent = <&gpio0>;
176 		clock-output-names = "xin32k", "rk808-clkout2";
177 		#clock-cells = <1>;
178 		pinctrl-names = "default";
179 		pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>;
180 		rockchip,system-power-controller;
181 		vcc1-supply = <&vcc_sys>;
182 		vcc2-supply = <&vcc_sys>;
183 		vcc3-supply = <&vcc_sys>;
184 		vcc4-supply = <&vcc_sys>;
185 		vcc6-supply = <&vcc_sys>;
186 		vcc7-supply = <&vcc_sys>;
187 		vcc8-supply = <&vcc_sys>;
188 		vcc9-supply = <&vcc_sys>;
189 		vcc10-supply = <&vcc_sys>;
190 		vcc11-supply = <&vcc_sys>;
191 		vcc12-supply = <&vcc_sys>;
195 				regulator-name = "vdd_cpu";
196 				regulator-min-microvolt = <700000>;
197 				regulator-max-microvolt = <1500000>;
198 				regulator-always-on;
199 				regulator-boot-on;
203 				regulator-name = "vdd_log";
204 				regulator-min-microvolt = <700000>;
205 				regulator-max-microvolt = <1500000>;
206 				regulator-always-on;
207 				regulator-boot-on;
211 				regulator-name = "vcc_ddr";
212 				regulator-always-on;
213 				regulator-boot-on;
217 				regulator-name = "vcc33_io";
218 				regulator-min-microvolt = <3300000>;
219 				regulator-max-microvolt = <3300000>;
220 				regulator-always-on;
221 				regulator-boot-on;
225 				regulator-name = "vcc33_video";
226 				regulator-min-microvolt = <3300000>;
227 				regulator-max-microvolt = <3300000>;
228 				regulator-always-on;
229 				regulator-boot-on;
233 				regulator-name = "vdd10_pll";
234 				regulator-min-microvolt = <1000000>;
235 				regulator-max-microvolt = <1000000>;
236 				regulator-always-on;
237 				regulator-boot-on;
241 				regulator-name = "vdd10_video";
242 				regulator-min-microvolt = <1000000>;
243 				regulator-max-microvolt = <1000000>;
244 				regulator-always-on;
245 				regulator-boot-on;
249 				regulator-always-on;
250 				regulator-boot-on;
251 				regulator-min-microvolt = <1800000>;
252 				regulator-max-microvolt = <1800000>;
253 				regulator-name = "vcc_18";
257 				regulator-name = "vcc18_video";
258 				regulator-min-microvolt = <1800000>;
259 				regulator-max-microvolt = <1800000>;
260 				regulator-always-on;
261 				regulator-boot-on;
275 /* The RK3368-uQ7 "Lion" has most IO voltages hardwired to 3.3V. */
277 	audio-supply = <&vcc33_io>;
278 	dvp-supply = <&vcc33_io>;
279 	flash0-supply = <&vcc_18>;
280 	gpio30-supply = <&vcc33_io>;
281 	gpio1830-supply = <&vcc33_io>;
282 	sdcard-supply = <&vcc33_io>;
283 	wifi-supply = <&vcc33_io>;
289 		module_led_pins: module-led-pins {
296 		pmic_int_l: pmic-int-l {
300 		pmic_sleep: pmic-sleep {
307 	pmu-supply = <&vcc33_io>;
308 	vop-supply = <&vcc33_io>;
316 		compatible = "jedec,spi-nor";
318 		spi-max-frequency = <50000000>;