Lines Matching +full:vcc5 +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Based on rk3328-nanopi-r2s.dts, which is:
4 * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/leds/common.h>
15 compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
23 stdout-path = "serial2:1500000n8";
26 gmac_clk: gmac-clock {
27 compatible = "fixed-clock";
28 clock-frequency = <125000000>;
29 clock-output-names = "gmac_clkin";
30 #clock-cells = <0>;
34 compatible = "gpio-leds";
35 pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
36 pinctrl-names = "default";
38 led-0 {
44 led-1 {
48 linux,default-trigger = "heartbeat";
51 led-2 {
58 vcc_sd: sdmmc-regulator {
59 compatible = "regulator-fixed";
61 pinctrl-0 = <&sdmmc0m1_pin>;
62 pinctrl-names = "default";
63 regulator-name = "vcc_sd";
64 regulator-boot-on;
65 vin-supply = <&vcc_io>;
68 vcc_sys: vcc-sys-regulator {
69 compatible = "regulator-fixed";
70 regulator-name = "vcc_sys";
71 regulator-always-on;
72 regulator-boot-on;
73 regulator-min-microvolt = <5000000>;
74 regulator-max-microvolt = <5000000>;
77 vdd_5v_lan: vdd-5v-lan-regulator {
78 compatible = "regulator-fixed";
79 enable-active-high;
81 pinctrl-0 = <&lan_vdd_pin>;
82 pinctrl-names = "default";
83 regulator-name = "vdd_5v_lan";
84 regulator-always-on;
85 regulator-boot-on;
86 vin-supply = <&vcc_sys>;
91 cpu-supply = <&vdd_arm>;
95 cpu-supply = <&vdd_arm>;
99 cpu-supply = <&vdd_arm>;
103 cpu-supply = <&vdd_arm>;
111 assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
112 assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
114 phy-handle = <&rtl8211e>;
115 phy-mode = "rgmii";
116 phy-supply = <&vcc_io>;
117 pinctrl-0 = <&rgmiim1_pins>;
118 pinctrl-names = "default";
125 compatible = "snps,dwmac-mdio";
126 #address-cells = <1>;
127 #size-cells = <0>;
129 rtl8211e: ethernet-phy@1 {
131 pinctrl-0 = <ð_phy_reset_pin>;
132 pinctrl-names = "default";
133 reset-assert-us = <10000>;
134 reset-deassert-us = <50000>;
135 reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
146 interrupt-parent = <&gpio1>;
148 #clock-cells = <1>;
149 clock-output-names = "xin32k", "rk805-clkout2";
150 gpio-controller;
151 #gpio-cells = <2>;
152 pinctrl-0 = <&pmic_int_l>;
153 pinctrl-names = "default";
154 rockchip,system-power-controller;
155 wakeup-source;
157 vcc1-supply = <&vcc_sys>;
158 vcc2-supply = <&vcc_sys>;
159 vcc3-supply = <&vcc_sys>;
160 vcc4-supply = <&vcc_sys>;
161 vcc5-supply = <&vcc_io>;
162 vcc6-supply = <&vcc_sys>;
166 regulator-name = "vdd_log";
167 regulator-always-on;
168 regulator-boot-on;
169 regulator-min-microvolt = <712500>;
170 regulator-max-microvolt = <1450000>;
171 regulator-ramp-delay = <12500>;
173 regulator-state-mem {
174 regulator-on-in-suspend;
175 regulator-suspend-microvolt = <1000000>;
180 regulator-name = "vdd_arm";
181 regulator-always-on;
182 regulator-boot-on;
183 regulator-min-microvolt = <712500>;
184 regulator-max-microvolt = <1450000>;
185 regulator-ramp-delay = <12500>;
187 regulator-state-mem {
188 regulator-on-in-suspend;
189 regulator-suspend-microvolt = <950000>;
194 regulator-name = "vcc_ddr";
195 regulator-always-on;
196 regulator-boot-on;
198 regulator-state-mem {
199 regulator-on-in-suspend;
204 regulator-name = "vcc_io";
205 regulator-always-on;
206 regulator-boot-on;
207 regulator-min-microvolt = <3300000>;
208 regulator-max-microvolt = <3300000>;
210 regulator-state-mem {
211 regulator-on-in-suspend;
212 regulator-suspend-microvolt = <3300000>;
217 regulator-name = "vcc_18";
218 regulator-always-on;
219 regulator-boot-on;
220 regulator-min-microvolt = <1800000>;
221 regulator-max-microvolt = <1800000>;
223 regulator-state-mem {
224 regulator-on-in-suspend;
225 regulator-suspend-microvolt = <1800000>;
230 regulator-name = "vcc18_emmc";
231 regulator-always-on;
232 regulator-boot-on;
233 regulator-min-microvolt = <1800000>;
234 regulator-max-microvolt = <1800000>;
236 regulator-state-mem {
237 regulator-on-in-suspend;
238 regulator-suspend-microvolt = <1800000>;
243 regulator-name = "vdd_10";
244 regulator-always-on;
245 regulator-boot-on;
246 regulator-min-microvolt = <1000000>;
247 regulator-max-microvolt = <1000000>;
249 regulator-state-mem {
250 regulator-on-in-suspend;
251 regulator-suspend-microvolt = <1000000>;
259 pmuio-supply = <&vcc_io>;
260 vccio1-supply = <&vcc_io>;
261 vccio2-supply = <&vcc18_emmc>;
262 vccio3-supply = <&vcc_io>;
263 vccio4-supply = <&vcc_io>;
264 vccio5-supply = <&vcc_io>;
265 vccio6-supply = <&vcc_io>;
271 eth_phy_reset_pin: eth-phy-reset-pin {
277 lan_led_pin: lan-led-pin {
281 sys_led_pin: sys-led-pin {
285 wan_led_pin: wan-led-pin {
291 lan_vdd_pin: lan-vdd-pin {
297 pmic_int_l: pmic-int-l {
308 bus-width = <4>;
309 cap-sd-highspeed;
310 disable-wp;
311 pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
312 pinctrl-names = "default";
313 vmmc-supply = <&vcc_sd>;
321 compatible = "jedec,spi-nor";
323 spi-max-frequency = <50000000>;
328 rockchip,hw-tshut-mode = <0>;
329 rockchip,hw-tshut-polarity = <0>;
357 #address-cells = <1>;
358 #size-cells = <0>;