Lines Matching +full:vcc +full:- +full:drv +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include <dt-bindings/leds/common.h>
24 stdout-path = "serial0:1500000n8";
28 compatible = "gpio-leds";
29 pinctrl-names = "default";
30 pinctrl-0 = <&green_led>, <&heartbeat_led>;
32 green-led {
34 default-state = "on";
38 linux,default-trigger = "default-on";
41 blue-led {
43 default-state = "on";
47 linux,default-trigger = "heartbeat";
51 sdio_pwrseq: sdio-pwrseq {
52 compatible = "mmc-pwrseq-simple";
53 pinctrl-0 = <&wifi_enable_h>;
54 pinctrl-names = "default";
55 reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
58 vcc_1v8: vcc-1v8 {
59 compatible = "regulator-fixed";
60 regulator-name = "vcc_1v8";
61 regulator-always-on;
62 regulator-boot-on;
63 regulator-min-microvolt = <1800000>;
64 regulator-max-microvolt = <1800000>;
65 vin-supply = <&vcc_io>;
68 vcc_io: vcc-io {
69 compatible = "regulator-fixed";
70 regulator-name = "vcc_io";
71 regulator-always-on;
72 regulator-boot-on;
73 regulator-min-microvolt = <3300000>;
74 regulator-max-microvolt = <3300000>;
75 vin-supply = <&vcc5v0_sys>;
78 vcc_ddr: vcc-ddr {
79 compatible = "regulator-fixed";
80 regulator-name = "vcc_ddr";
81 regulator-always-on;
82 regulator-boot-on;
83 regulator-min-microvolt = <1500000>;
84 regulator-max-microvolt = <1500000>;
85 vin-supply = <&vcc5v0_sys>;
88 vcc5v0_otg: vcc5v0-otg {
89 compatible = "regulator-fixed";
90 enable-active-high;
92 pinctrl-names = "default";
93 pinctrl-0 = <&otg_vbus_drv>;
94 regulator-name = "vcc5v0_otg";
95 regulator-always-on;
96 vin-supply = <&vcc5v0_sys>;
99 vcc5v0_sys: vcc5v0-sys {
100 compatible = "regulator-fixed";
101 regulator-name = "vcc5v0_sys";
102 regulator-always-on;
103 regulator-boot-on;
104 regulator-min-microvolt = <5000000>;
105 regulator-max-microvolt = <5000000>;
108 vdd_core: vdd-core {
109 compatible = "pwm-regulator";
111 pwm-supply = <&vcc5v0_sys>;
112 regulator-name = "vdd_core";
113 regulator-min-microvolt = <827000>;
114 regulator-max-microvolt = <1340000>;
115 regulator-settling-time-up-us = <250>;
116 regulator-always-on;
117 regulator-boot-on;
120 vdd_log: vdd-log {
121 compatible = "regulator-fixed";
122 regulator-name = "vdd_log";
123 regulator-always-on;
124 regulator-boot-on;
125 regulator-min-microvolt = <1050000>;
126 regulator-max-microvolt = <1050000>;
127 vin-supply = <&vcc5v0_sys>;
132 cpu-supply = <&vdd_core>;
136 cap-mmc-highspeed;
137 cap-sd-highspeed;
138 no-sdio;
139 non-removable;
140 pinctrl-names = "default";
141 pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
142 vmmc-supply = <&vcc_io>;
148 phy-handle = <&rtl8201f>;
149 phy-supply = <&vcc_io>;
153 compatible = "snps,dwmac-mdio";
154 #address-cells = <1>;
155 #size-cells = <0>;
157 rtl8201f: ethernet-phy@1 {
158 compatible = "ethernet-phy-ieee802.3-c22";
160 pinctrl-names = "default";
161 pinctrl-0 = <&mac_rst>;
162 reset-assert-us = <20000>;
163 reset-deassert-us = <50000>;
164 reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
174 pinctrl-names = "default";
175 pinctrl-0 = <&rtc_32k>;
178 bt_reg_on: bt-reg-on {
182 bt_wake_host: bt-wake-host {
186 host_wake_bt: host-wake-bt {
192 mac_rst: mac-rst {
198 green_led: green-led {
202 heartbeat_led: heartbeat-led {
208 otg_vbus_drv: otg-vbus-drv {
213 sdio-pwrseq {
214 wifi_enable_h: wifi-enable-h {
218 wifi_host_wake: wifi-host-wake {
226 pinctrl-0 = <&pwm0_pin_pull_down>;
230 vref-supply = <&vcc_1v8>;
235 #address-cells = <1>;
236 #size-cells = <0>;
237 cap-sd-highspeed;
238 cap-sdio-irq;
239 keep-power-in-suspend;
240 max-frequency = <100000000>;
241 mmc-pwrseq = <&sdio_pwrseq>;
242 no-mmc;
243 no-sd;
244 non-removable;
245 sd-uhs-sdr50;
246 vmmc-supply = <&vcc_io>;
247 vqmmc-supply = <&vcc_1v8>;
252 interrupt-parent = <&gpio0>;
254 interrupt-names = "host-wake";
255 pinctrl-names = "default";
256 pinctrl-0 = <&wifi_host_wake>;
261 cap-mmc-highspeed;
262 cap-sd-highspeed;
263 disable-wp;
264 vmmc-supply = <&vcc_io>;
271 u2phy_host: host-port {
272 phy-supply = <&vcc5v0_otg>;
276 u2phy_otg: otg-port {
277 phy-supply = <&vcc5v0_otg>;
283 pinctrl-names = "default";
284 pinctrl-0 = <&uart0_xfer>;
289 uart-has-rtscts;
293 compatible = "realtek,rtl8723ds-bt";
294 device-wake-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
295 enable-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
296 host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
297 pinctrl-names = "default";
298 pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;