dts/renesas/rzg2lc-smarc.dtsi

1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3  * Device Tree Source for the RZ/G2LC SMARC EVK parts
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
11 #include "rzg2lc-smarc-pinfunction.dtsi"
12 #include "rz-smarc-common.dtsi"
20 	osc1: cec-clock {
21 		compatible = "fixed-clock";
22 		#clock-cells = <0>;
23 		clock-frequency = <12000000>;
26 	hdmi-out {
27 		compatible = "hdmi-connector";
32 				remote-endpoint = <&adv7535_out>;
40 	pinctrl-0 = <&can1_pins>;
41 	/delete-node/ channel@0;
45 	/delete-property/ pinctrl-0;
46 	/delete-property/ pinctrl-names;
52 	sound-dai = <&ssi0>;
59 		#address-cells = <1>;
60 		#size-cells = <0>;
71 				data-lanes = <1 2 3 4>;
72 				remote-endpoint = <&adv7535_in>;
83 		interrupt-parent = <&pinctrl>;
86 		clock-names = "cec";
87 		avdd-supply = <&reg_1p8v>;
88 		dvdd-supply = <&reg_1p8v>;
89 		pvdd-supply = <&reg_1p8v>;
90 		a2vdd-supply = <&reg_1p8v>;
91 		v3p3-supply = <&reg_3p3v>;
92 		v1p2-supply = <&reg_1p8v>;
94 		adi,dsi-lanes = <4>;
97 			#address-cells = <1>;
98 			#size-cells = <0>;
103 					remote-endpoint = <&dsi0_out>;
110 					remote-endpoint = <&hdmi_con_out>;
118 	pinctrl-0 = <&i2c2_pins>;
119 	pinctrl-names = "default";
120 	clock-frequency = <400000>;
126 		#sound-dai-cells = <0>;
132 &mtu3 {
133 	pinctrl-0 = <&mtu3_pins>;
134 	pinctrl-names = "default";
146  * SW1 should be at position 2->3 so that SER0_CTS# line is activated
147  * SW2 should be at position 2->3 so that SER0_TX line is activated
148  * SW3 should be at position 2->3 so that SER0_RX line is activated
149  * SW4 should be at position 2->3 so that SER0_RTS# line is activated
153 	pinctrl-0 = <&scif1_pins>;
154 	pinctrl-names = "default";
156 	uart-has-rtscts;
162 	pinctrl-0 = <&ssi0_pins>;
163 	pinctrl-names = "default";
170 	/delete-property/ pinctrl-0;
171 	/delete-property/ pinctrl-names;