Lines Matching +full:v1p2 +full:- +full:supply

1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
17 	osc1: cec-clock {
18 		compatible = "fixed-clock";
19 		#clock-cells = <0>;
20 		clock-frequency = <12000000>;
23 	hdmi-out {
24 		compatible = "hdmi-connector";
29 				remote-endpoint = <&adv7535_out>;
36 	sound-dai = <&ssi0>;
43 		#address-cells = <1>;
44 		#size-cells = <0>;
55 				data-lanes = <1 2 3 4>;
56 				remote-endpoint = <&adv7535_in>;
67 		interrupt-parent = <&pinctrl>;
70 		clock-names = "cec";
71 		avdd-supply = <&reg_1p8v>;
72 		dvdd-supply = <&reg_1p8v>;
73 		pvdd-supply = <&reg_1p8v>;
74 		a2vdd-supply = <&reg_1p8v>;
75 		v3p3-supply = <&reg_3p3v>;
76 		v1p2-supply = <&reg_1p8v>;
78 		adi,dsi-lanes = <4>;
81 			#address-cells = <1>;
82 			#size-cells = <0>;
87 					remote-endpoint = <&dsi0_out>;
94 					remote-endpoint = <&hdmi_con_out>;
102 	pinctrl-0 = <&i2c3_pins>;
103 	pinctrl-names = "default";
104 	clock-frequency = <400000>;
110 		#sound-dai-cells = <0>;
117 	pinctrl-0 = <&mtu3_pins>;
118 	pinctrl-names = "default";
137  * SW1 should be at position 2->3 so that SER0_CTS# line is activated
138  * SW2 should be at position 2->3 so that SER0_TX line is activated
139  * SW3 should be at position 2->3 so that SER0_RX line is activated
140  * SW4 should be at position 2->3 so that SER0_RTS# line is activated
144 	pinctrl-0 = <&scif2_pins>;
145 	pinctrl-names = "default";
147 	uart-has-rtscts;
153 	pinctrl-0 = <&ssi0_pins>;
154 	pinctrl-names = "default";