Lines Matching +full:regulator +full:- +full:system +full:- +full:load
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/leds/common.h>
14 compatible = "qcom,qrb4210-rb2", "qcom,qrb4210", "qcom,sm4250";
21 stdout-path = "serial0:115200n8";
25 clk40M: can-clk {
26 compatible = "fixed-clock";
27 clock-frequency = <40000000>;
28 #clock-cells = <0>;
32 gpio-keys {
33 compatible = "gpio-keys";
34 label = "gpio-keys";
36 pinctrl-0 = <&kypd_vol_up_n>;
37 pinctrl-names = "default";
39 key-volume-up {
43 debounce-interval = <15>;
44 linux,can-disable;
45 wakeup-source;
49 hdmi-connector {
50 compatible = "hdmi-connector";
55 remote-endpoint = <<9611_out>;
61 compatible = "i2c-gpio";
63 sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
64 scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
65 #address-cells = <1>;
66 #size-cells = <0>;
72 compatible = "gpio-leds";
74 led-bt {
79 linux,default-trigger = "bluetooth-power";
80 default-state = "off";
83 led-user0 {
88 linux,default-trigger = "none";
89 default-state = "off";
90 panic-indicator;
93 led-wlan {
98 linux,default-trigger = "phy0tx";
99 default-state = "off";
103 vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
104 compatible = "regulator-fixed";
105 regulator-name = "VREG_HDMI_OUT_1P2";
106 regulator-min-microvolt = <1200000>;
107 regulator-max-microvolt = <1200000>;
108 vin-supply = <&vdc_1v2>;
109 regulator-always-on;
110 regulator-boot-on;
113 lt9611_3v3: regulator-lt9611-3v3 {
114 compatible = "regulator-fixed";
115 regulator-name = "LT9611_3V3";
116 regulator-min-microvolt = <3300000>;
117 regulator-max-microvolt = <3300000>;
118 vin-supply = <&vdc_3v3>;
119 regulator-always-on;
120 regulator-boot-on;
124 vdc_12v: regulator-vdc-12v {
125 compatible = "regulator-fixed";
126 regulator-name = "DC_12V";
127 regulator-min-microvolt = <12000000>;
128 regulator-max-microvolt = <12000000>;
129 regulator-always-on;
130 regulator-boot-on;
134 vdc_1v2: regulator-vdc-1v2 {
135 compatible = "regulator-fixed";
136 regulator-name = "VDC_1V2";
137 regulator-min-microvolt = <1200000>;
138 regulator-max-microvolt = <1200000>;
139 vin-supply = <&vdc_12v>;
140 regulator-always-on;
141 regulator-boot-on;
145 vdc_3v3: regulator-vdc-3v3 {
146 compatible = "regulator-fixed";
147 regulator-name = "VDC_3V3";
148 regulator-min-microvolt = <3300000>;
149 regulator-max-microvolt = <3300000>;
150 vin-supply = <&vdc_12v>;
151 regulator-always-on;
152 regulator-boot-on;
156 vdc_5v: regulator-vdc-5v {
157 compatible = "regulator-fixed";
158 regulator-name = "VDC_5V";
160 regulator-min-microvolt = <5000000>;
161 regulator-max-microvolt = <5000000>;
162 regulator-always-on;
163 regulator-boot-on;
167 vdc_vbat_som: regulator-vdc-vbat {
168 compatible = "regulator-fixed";
169 regulator-name = "VBAT_SOM";
170 regulator-min-microvolt = <4200000>;
171 regulator-max-microvolt = <4200000>;
172 regulator-always-on;
173 regulator-boot-on;
177 vph_pwr: regulator-vph-pwr {
178 compatible = "regulator-fixed";
179 regulator-name = "vph_pwr";
180 regulator-min-microvolt = <3700000>;
181 regulator-max-microvolt = <3700000>;
182 vin-supply = <&vdc_vbat_som>;
184 regulator-always-on;
185 regulator-boot-on;
196 zap-shader {
197 firmware-name = "qcom/qrb4210/a610_zap.mbn";
202 clock-frequency = <400000>;
205 lt9611_codec: hdmi-bridge@2b {
208 interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
209 reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
211 vdd-supply = <&vreg_hdmi_out_1p2>;
212 vcc-supply = <<9611_3v3>;
214 pinctrl-0 = <<9611_irq_pin <9611_rst_pin>;
215 pinctrl-names = "default";
216 #sound-dai-cells = <1>;
219 #address-cells = <1>;
220 #size-cells = <0>;
226 remote-endpoint = <&mdss_dsi0_out>;
234 remote-endpoint = <&hdmi_con>;
246 vdda-supply = <&vreg_l18a_1p232>;
251 remote-endpoint = <<9611_a>;
252 data-lanes = <0 1 2 3>;
260 kypd_vol_up_n: kypd-vol-up-n-state {
263 power-source = <0>;
264 bias-pull-up;
265 input-enable;
283 firmware-name = "qcom/qrb4210/adsp.mbn";
289 firmware-name = "qcom/qrb4210/cdsp.mbn";
296 compatible = "qcom,rpm-pm6125-regulators";
298 vdd-s1-supply = <&vph_pwr>;
299 vdd-s2-supply = <&vph_pwr>;
300 vdd-s3-supply = <&vph_pwr>;
301 vdd-s4-supply = <&vph_pwr>;
302 vdd-s5-supply = <&vph_pwr>;
303 vdd-s6-supply = <&vph_pwr>;
304 vdd-s7-supply = <&vph_pwr>;
305 vdd-s8-supply = <&vph_pwr>;
306 vdd-s9-supply = <&vph_pwr>;
307 vdd-s10-supply = <&vph_pwr>;
309 vdd-l1-l7-l17-l18-supply = <&vreg_s6a_1p352>;
310 vdd-l2-l3-l4-supply = <&vreg_s6a_1p352>;
311 vdd-l5-l15-l19-l20-l21-l22-supply = <&vph_pwr>;
312 vdd-l6-l8-supply = <&vreg_s5a_0p848>;
313 vdd-l9-l11-supply = <&vreg_s7a_2p04>;
314 vdd-l10-l13-l14-supply = <&vreg_s7a_2p04>;
315 vdd-l12-l16-supply = <&vreg_s7a_2p04>;
316 vdd-l23-l24-supply = <&vph_pwr>;
319 regulator-min-microvolt = <920000>;
320 regulator-max-microvolt = <1128000>;
324 regulator-min-microvolt = <304000>;
325 regulator-max-microvolt = <1456000>;
329 regulator-min-microvolt = <1280000>;
330 regulator-max-microvolt = <2080000>;
334 regulator-min-microvolt = <952000>;
335 regulator-max-microvolt = <1152000>;
339 regulator-min-microvolt = <488000>;
340 regulator-max-microvolt = <1000000>;
344 regulator-min-microvolt = <1648000>;
345 regulator-max-microvolt = <3056000>;
346 regulator-allow-set-load;
350 regulator-min-microvolt = <576000>;
351 regulator-max-microvolt = <656000>;
355 regulator-min-microvolt = <1200000>;
356 regulator-max-microvolt = <1304000>;
360 regulator-min-microvolt = <400000>;
361 regulator-max-microvolt = <728000>;
365 regulator-min-microvolt = <1800000>;
366 regulator-max-microvolt = <2000000>;
367 regulator-always-on;
368 regulator-boot-on;
372 regulator-min-microvolt = <1704000>;
373 regulator-max-microvolt = <1904000>;
377 regulator-min-microvolt = <1704000>;
378 regulator-max-microvolt = <1952000>;
379 regulator-allow-set-load;
383 regulator-min-microvolt = <1624000>;
384 regulator-max-microvolt = <1984000>;
388 regulator-min-microvolt = <1504000>;
389 regulator-max-microvolt = <1952000>;
393 regulator-min-microvolt = <1704000>;
394 regulator-max-microvolt = <1904000>;
398 regulator-min-microvolt = <2920000>;
399 regulator-max-microvolt = <3232000>;
403 regulator-min-microvolt = <1704000>;
404 regulator-max-microvolt = <1904000>;
408 regulator-min-microvolt = <1152000>;
409 regulator-max-microvolt = <1384000>;
413 regulator-min-microvolt = <1104000>;
414 regulator-max-microvolt = <1312000>;
418 regulator-min-microvolt = <1624000>;
419 regulator-max-microvolt = <3304000>;
423 regulator-min-microvolt = <1624000>;
424 regulator-max-microvolt = <3304000>;
428 regulator-min-microvolt = <2400000>;
429 regulator-max-microvolt = <3600000>;
433 regulator-min-microvolt = <2952000>;
434 regulator-max-microvolt = <3304000>;
435 regulator-system-load = <100000>;
436 regulator-allow-set-load;
440 regulator-min-microvolt = <3200000>;
441 regulator-max-microvolt = <3400000>;
445 regulator-min-microvolt = <2704000>;
446 regulator-max-microvolt = <3600000>;
447 regulator-system-load = <100000>;
448 regulator-allow-set-load;
454 pinctrl-0 = <&sdc1_state_on>;
455 pinctrl-1 = <&sdc1_state_off>;
456 pinctrl-names = "default", "sleep";
458 vmmc-supply = <&vreg_l24a_2p96>;
459 vqmmc-supply = <&vreg_l11a_1p8>;
460 no-sdio;
461 non-removable;
467 cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */
469 pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
470 pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
471 pinctrl-names = "default", "sleep";
473 vmmc-supply = <&vreg_l22a_2p96>;
474 vqmmc-supply = <&vreg_l5a_2p96>;
475 no-sdio;
486 interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
488 spi-max-frequency = <10000000>;
489 vdd-supply = <&vdc_5v>;
490 xceiver-supply = <&vdc_5v>;
495 clock-frequency = <32000>;
499 gpio-reserved-ranges = <43 2>, <49 1>, <54 1>,
503 lt9611_rst_pin: lt9611-rst-state {
506 input-disable;
507 output-high;
510 lt9611_irq_pin: lt9611-irq-state {
513 bias-disable;
516 sdc2_card_det_n: sd-card-det-n-state {
519 drive-strength = <2>;
520 bias-pull-up;
533 maximum-speed = "super-speed";
537 vdd-supply = <&vreg_l4a_0p9>;
538 vdda-pll-supply = <&vreg_l12a_1p8>;
539 vdda-phy-dpdm-supply = <&vreg_l15a_3p128>;
545 vdda-phy-supply = <&vreg_l4a_0p9>;
546 vdda-pll-supply = <&vreg_l12a_1p8>;
552 clock-frequency = <19200000>;