dts/qcom/msm8953-xiaomi-daisy.dts

1 // SPDX-License-Identifier: BSD-3-Clause
5 /dts-v1/;
7 #include "msm8953.dtsi"
11 /delete-node/ &adsp_fw_mem;
12 /delete-node/ &qseecom_mem;
13 /delete-node/ &wcnss_fw_mem;
17 	compatible = "xiaomi,daisy", "qcom,msm8953";
18 	chassis-type = "handset";
19 	qcom,msm-id = <293 0>;
20 	qcom,board-id = <0x1000b 0x9>;
23 		#address-cells = <2>;
24 		#size-cells = <2>;
28 			compatible = "simple-framebuffer";
36 			power-domains = <&gcc MDSS_GDSC>;
38 			clocks = <&gcc GCC_MDSS_AHB_CLK>,
39 				 <&gcc GCC_MDSS_AXI_CLK>,
40 				 <&gcc GCC_MDSS_VSYNC_CLK>,
41 				 <&gcc GCC_MDSS_MDP_CLK>,
42 				 <&gcc GCC_MDSS_BYTE0_CLK>,
43 				 <&gcc GCC_MDSS_PCLK0_CLK>,
44 				 <&gcc GCC_MDSS_ESC0_CLK>;
48 	gpio-keys {
49 		compatible = "gpio-keys";
51 		pinctrl-names = "default";
52 		pinctrl-0 = <&gpio_key_default>;
54 		key-volume-up {
61 	reserved-memory {
64 			no-map;
69 			no-map;
74 			no-map;
82 	i2c-sensors {
83 		compatible = "i2c-gpio";
84 		sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
85 		scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
86 		i2c-gpio,delay-us = <2>; /* ~100 kHz */
87 		#address-cells = <1>;
88 		#size-cells = <0>;
93 			vdd-supply = <&pm8953_l10>;
94 			vddio-supply = <&pm8953_l6>;
95 			mount-matrix = "-1", "0", "0",
96 					"0", "-1", "0",
101 	vph_pwr: vph-pwr-regulator {
102 		compatible = "regulator-fixed";
103 		regulator-name = "vph_pwr";
104 		regulator-always-on;
105 		regulator-boot-on;
110 	vdd-supply = <&pm8953_l3>;
111 	vdda-pll-supply = <&pm8953_l7>;
112 	vdda-phy-dpdm-supply = <&pm8953_l13>;
120 	speaker_codec: audio-codec@3a {
124 		reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
126 		vmon-slot-no = <1>;
127 		imon-slot-no = <1>;
128 		maxim,interleave-mode;
130 		#sound-dai-cells = <0>;
138 		compatible = "edt,edt-ft5406";
141 		interrupt-parent = <&tlmm>;
144 		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
146 		vcc-supply = <&pm8953_l10>;
148 		touchscreen-size-x = <1080>;
149 		touchscreen-size-y = <2280>;
159 	qcom,current-limit-microamp = <20000>;
160 	qcom,num-strings = <2>;
167 		compatible = "qcom,rpm-pm8953-regulators";
169 		vdd_s1-supply = <&vph_pwr>;
170 		vdd_s2-supply = <&vph_pwr>;
171 		vdd_s3-supply = <&vph_pwr>;
172 		vdd_s4-supply = <&vph_pwr>;
173 		vdd_s5-supply = <&vph_pwr>;
174 		vdd_s6-supply = <&vph_pwr>;
175 		vdd_s7-supply = <&vph_pwr>;
176 		vdd_l1-supply = <&pm8953_s3>;
177 		vdd_l2_l3-supply = <&pm8953_s3>;
178 		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
179 		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
180 		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
183 			regulator-min-microvolt = <863000>;
184 			regulator-max-microvolt = <1152000>;
188 			regulator-min-microvolt = <1224000>;
189 			regulator-max-microvolt = <1224000>;
193 			regulator-min-microvolt = <1896000>;
194 			regulator-max-microvolt = <2048000>;
198 			regulator-min-microvolt = <1000000>;
199 			regulator-max-microvolt = <1100000>;
203 			regulator-min-microvolt = <975000>;
204 			regulator-max-microvolt = <1225000>;
208 			regulator-min-microvolt = <925000>;
209 			regulator-max-microvolt = <925000>;
210 			regulator-allow-set-load;
214 			regulator-min-microvolt = <1800000>;
215 			regulator-max-microvolt = <1800000>;
219 			regulator-min-microvolt = <1800000>;
220 			regulator-max-microvolt = <1800000>;
221 			regulator-always-on;
225 			regulator-min-microvolt = <1800000>;
226 			regulator-max-microvolt = <1900000>;
230 			regulator-min-microvolt = <2900000>;
231 			regulator-max-microvolt = <2900000>;
235 			regulator-min-microvolt = <3000000>;
236 			regulator-max-microvolt = <3300000>;
240 			regulator-min-microvolt = <2850000>;
241 			regulator-max-microvolt = <2850000>;
242 			regulator-always-on;
246 			regulator-min-microvolt = <2950000>;
247 			regulator-max-microvolt = <2950000>;
251 			regulator-min-microvolt = <1800000>;
252 			regulator-max-microvolt = <2950000>;
256 			regulator-min-microvolt = <3125000>;
257 			regulator-max-microvolt = <3125000>;
261 			regulator-min-microvolt = <1800000>;
262 			regulator-max-microvolt = <1800000>;
266 			regulator-min-microvolt = <2850000>;
267 			regulator-max-microvolt = <2850000>;
271 			regulator-min-microvolt = <1200000>;
272 			regulator-max-microvolt = <1350000>;
276 			regulator-min-microvolt = <2800000>;
277 			regulator-max-microvolt = <2850000>;
278 			regulator-always-on;
282 			regulator-min-microvolt = <975000>;
283 			regulator-max-microvolt = <1225000>;
289 	vmmc-supply = <&pm8953_l8>;
290 	vqmmc-supply = <&pm8953_l5>;
296 	vmmc-supply = <&pm8953_l11>;
297 	vqmmc-supply = <&pm8953_l12>;
299 	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
301 	pinctrl-names = "default", "sleep";
302 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
303 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
309 	gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
313 	pinctrl-names = "default";
314 	pinctrl-0 = <&uart_console_active>;