Lines Matching +full:drdy +full:- +full:int +full:- +full:pin
1 // SPDX-License-Identifier: GPL-2.0-only
3 /dts-v1/;
5 #include "msm8916-pm8916.dtsi"
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/interrupt-controller/irq.h>
18 stdout-path = "serial0";
21 reserved-memory {
23 tz-apps@85500000 {
25 no-map;
29 gpio-keys {
30 compatible = "gpio-keys";
32 pinctrl-0 = <&gpio_keys_default>;
33 pinctrl-names = "default";
37 volume-up-button {
43 home-button {
50 gpio-hall-sensor {
51 compatible = "gpio-keys";
53 pinctrl-0 = <&gpio_hall_sensor_default>;
54 pinctrl-names = "default";
58 hall-sensor-switch {
61 linux,input-type = <EV_SW>;
63 linux,can-disable;
72 compatible = "maxim,max77849-battery";
75 maxim,rsns-microohm = <10000>;
76 maxim,over-heat-temp = <600>;
77 maxim,over-volt = <4400>;
79 interrupt-parent = <&tlmm>;
82 pinctrl-0 = <&fuelgauge_int_default>;
83 pinctrl-names = "default";
90 light-sensor@10 {
99 vdd-supply = <&pm8916_l17>;
100 vddio-supply = <&pm8916_l5>;
102 interrupt-parent = <&tlmm>;
105 st,drdy-int-pin = <1>;
106 mount-matrix = "0", "1", "0",
107 "-1", "0", "0",
110 pinctrl-0 = <&accel_int_default>;
111 pinctrl-names = "default";
126 regulator-min-microvolt = <2850000>;
127 regulator-max-microvolt = <2850000>;
141 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
142 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
143 pinctrl-names = "default", "sleep";
145 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
170 accel_int_default: accel-int-default-state {
173 drive-strength = <2>;
174 bias-disable;
177 fuelgauge_int_default: fuelgauge-int-default-state {
180 drive-strength = <2>;
181 bias-disable;
184 gpio_keys_default: gpio-keys-default-state {
187 drive-strength = <2>;
188 bias-pull-up;
191 gpio_hall_sensor_default: gpio-hall-sensor-default-state {
194 drive-strength = <2>;
195 bias-disable;
198 sdc2_cd_default: sdc2-cd-default-state {
201 drive-strength = <2>;
202 bias-disable;