dts/nvidia/tegra194-p2888.dtsi

1 // SPDX-License-Identifier: GPL-2.0
4 #include <dt-bindings/mfd/max77620.h>
27 		stdout-path = "serial0:115200n8";
34 			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>;
35 			phy-handle = <&phy>;
36 			phy-mode = "rgmii-id";
39 				#address-cells = <1>;
40 				#size-cells = <0>;
42 				phy: ethernet-phy@0 {
43 					compatible = "ethernet-phy-ieee802.3-c22";
45 					interrupt-parent = <&gpio>;
47 					#phy-cells = <0>;
52 		memory-controller@2c00000 {
68 				vcc-supply = <&vdd_1v8ls>;
69 				address-width = <8>;
72 				read-only;
78 			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
84 			bus-width = <8>;
85 			non-removable;
87 			vqmmc-supply = <&vdd_1v8ls>;
88 			vmmc-supply = <&vdd_emmc_3v3>;
92 			avdd-usb-supply = <&vdd_usb_3v3>;
93 			vclamp-usb-supply = <&vdd_1v8ao>;
96 				usb2-0 {
97 					vbus-supply = <&vdd_5v0_sys>;
100 				usb2-1 {
101 					vbus-supply = <&vdd_5v0_sys>;
104 				usb2-3 {
105 					vbus-supply = <&vdd_5v_sata>;
108 				usb3-0 {
109 					vbus-supply = <&vdd_5v0_sys>;
112 				usb3-2 {
113 					vbus-supply = <&vdd_5v0_sys>;
116 				usb3-3 {
117 					vbus-supply = <&vdd_5v0_sys>;
127 			nvidia,invert-interrupt;
139 				interrupt-parent = <&pmc>;
141 				#interrupt-cells = <2>;
142 				interrupt-controller;
144 				#gpio-cells = <2>;
145 				gpio-controller;
147 				pinctrl-names = "default";
148 				pinctrl-0 = <&max20024_default>;
152 						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
153 						maxim,shutdown-fps-time-period-us = <640>;
157 						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
158 						maxim,shutdown-fps-time-period-us = <640>;
159 						maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
163 						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
164 						maxim,shutdown-fps-time-period-us = <640>;
176 						function = "fps-out";
177 						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
182 						function = "fps-out";
183 						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
188 						function = "fps-out";
189 						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
194 						function = "32k-out1";
195 						drive-push-pull = <1>;
201 						drive-push-pull = <1>;
207 						drive-push-pull = <0>;
212 					in-sd0-supply = <&vdd_5v0_sys>;
213 					in-sd1-supply = <&vdd_5v0_sys>;
214 					in-sd2-supply = <&vdd_5v0_sys>;
215 					in-sd3-supply = <&vdd_5v0_sys>;
216 					in-sd4-supply = <&vdd_5v0_sys>;
218 					in-ldo0-1-supply = <&vdd_5v0_sys>;
219 					in-ldo2-supply = <&vdd_5v0_sys>;
220 					in-ldo3-5-supply = <&vdd_5v0_sys>;
221 					in-ldo4-6-supply = <&vdd_5v0_sys>;
222 					in-ldo7-8-supply = <&vdd_1v8ls>;
225 						regulator-name = "VDDIO_SYS_1V0";
226 						regulator-min-microvolt = <1000000>;
227 						regulator-max-microvolt = <1000000>;
228 						regulator-always-on;
229 						regulator-boot-on;
233 						regulator-name = "VDDIO_SYS_1V8HS";
234 						regulator-min-microvolt = <1800000>;
235 						regulator-max-microvolt = <1800000>;
236 						regulator-always-on;
237 						regulator-boot-on;
241 						regulator-name = "VDDIO_SYS_1V8LS";
242 						regulator-min-microvolt = <1800000>;
243 						regulator-max-microvolt = <1800000>;
244 						regulator-always-on;
245 						regulator-boot-on;
249 						regulator-name = "VDDIO_AO_1V8";
250 						regulator-min-microvolt = <1800000>;
251 						regulator-max-microvolt = <1800000>;
252 						regulator-always-on;
253 						regulator-boot-on;
257 						regulator-name = "VDD_DDR_1V1";
258 						regulator-min-microvolt = <1100000>;
259 						regulator-max-microvolt = <1100000>;
260 						regulator-always-on;
261 						regulator-boot-on;
265 						regulator-name = "VDD_RTC";
266 						regulator-min-microvolt = <800000>;
267 						regulator-max-microvolt = <800000>;
268 						regulator-always-on;
269 						regulator-boot-on;
273 						regulator-name = "VDDIO_AO_3V3";
274 						regulator-min-microvolt = <3300000>;
275 						regulator-max-microvolt = <3300000>;
276 						regulator-always-on;
277 						regulator-boot-on;
281 						regulator-name = "VDD_EMMC_3V3";
282 						regulator-min-microvolt = <3300000>;
283 						regulator-max-microvolt = <3300000>;
287 						regulator-name = "VDD_USB_3V3";
288 						regulator-min-microvolt = <3300000>;
289 						regulator-max-microvolt = <3300000>;
293 						regulator-name = "VDD_SDIO_3V3";
294 						regulator-min-microvolt = <3300000>;
295 						regulator-max-microvolt = <3300000>;
299 						regulator-name = "AVDD_CSI_1V2";
300 						regulator-min-microvolt = <1200000>;
301 						regulator-max-microvolt = <1200000>;
306 			temperature-sensor@4c {
310 				interrupt-parent = <&gpio>;
313 				vcc-supply = <&vdd_1v8ls>;
315 				#thermal-sensor-cells = <1>;
320 	vdd_5v0_sys: regulator-vdd-5v0-sys {
321 		compatible = "regulator-fixed";
322 		regulator-name = "VIN_SYS_5V0";
323 		regulator-min-microvolt = <5000000>;
324 		regulator-max-microvolt = <5000000>;
325 		regulator-always-on;
326 		regulator-boot-on;
329 	vdd_hdmi: regulator-vdd-hdmi {
330 		compatible = "regulator-fixed";
331 		regulator-name = "VDD_5V0_HDMI_CON";
332 		regulator-min-microvolt = <5000000>;
333 		regulator-max-microvolt = <5000000>;
335 		enable-active-high;
338 	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
339 		compatible = "regulator-fixed";
340 		regulator-name = "PEX_3V3";
341 		regulator-min-microvolt = <3300000>;
342 		regulator-max-microvolt = <3300000>;
344 		regulator-boot-on;
345 		enable-active-high;
348 	vdd_12v_pcie: regulator-vdd-12v-pcie {
349 		compatible = "regulator-fixed";
350 		regulator-name = "VDD_12V";
351 		regulator-min-microvolt = <1200000>;
352 		regulator-max-microvolt = <1200000>;
354 		regulator-boot-on;
357 	vdd_5v_sata: regulator-vdd-5v0-sata {
358 		compatible = "regulator-fixed";
359 		regulator-name = "VDD_5V_SATA";
360 		regulator-min-microvolt = <5000000>;
361 		regulator-max-microvolt = <5000000>;
363 		enable-active-high;