dts/mediatek/pumpkin-common.dtsi

1 // SPDX-License-Identifier: GPL-2.0
7 #include <dt-bindings/gpio/gpio.h>
16 		stdout-path = "serial0:921600n8";
21 			compatible = "linaro,optee-tz";
26 	gpio-keys {
27 		compatible = "gpio-keys";
28 		pinctrl-names = "default";
29 		pinctrl-0 = <&gpio_keys_default>;
31 		key-volume-up {
35 			wakeup-source;
36 			debounce-interval = <15>;
39 		key-volume-down {
43 			wakeup-source;
44 			debounce-interval = <15>;
50 	pinctrl-names = "default";
51 	pinctrl-0 = <&i2c0_pins_a>;
57 		reset-gpios = <&pio 65 GPIO_ACTIVE_LOW>;
58 		pinctrl-names = "default";
59 		pinctrl-0 = <&tca6416_pins>;
61 		gpio-controller;
62 		#gpio-cells = <2>;
64 		eint20-mux-sel0-hog {
65 			gpio-hog;
68 			line-name = "eint20_mux_sel0";
71 		expcon-mux-sel1-hog {
72 			gpio-hog;
75 			line-name = "expcon_mux_sel1";
78 		mrg-di-mux-sel2-hog {
79 			gpio-hog;
82 			line-name = "mrg_di_mux_sel2";
85 		sd-sdio-mux-sel3-hog {
86 			gpio-hog;
89 			line-name = "sd_sdio_mux_sel3";
92 		sd-sdio-mux-ctrl7-hog {
93 			gpio-hog;
95 			output-low;
96 			line-name = "sd_sdio_mux_ctrl7";
99 		hw-id0-hog {
100 			gpio-hog;
103 			line-name = "hw_id0";
106 		hw-id1-hog {
107 			gpio-hog;
110 			line-name = "hw_id1";
113 		hw-id2-hog {
114 			gpio-hog;
117 			line-name = "hw_id2";
120 		fg-int-n-hog {
121 			gpio-hog;
124 			line-name = "fg_int_n";
127 		usba-pwr-en-hog {
128 			gpio-hog;
130 			output-high;
131 			line-name = "usba_pwr_en";
134 		wifi-3v3-pg-hog {
135 			gpio-hog;
138 			line-name = "wifi_3v3_pg";
141 		cam-rst-hog {
142 			gpio-hog;
144 			output-low;
145 			line-name = "cam_rst";
148 		cam-pwdn-hog {
149 			gpio-hog;
151 			output-low;
152 			line-name = "cam_pwdn";
158 	pinctrl-names = "default";
159 	pinctrl-0 = <&i2c2_pins_a>;
168 	pinctrl-names = "default";
169 	pinctrl-0 = <&ethernet_pins_default>;
170 	phy-handle = <&eth_phy>;
171 	phy-mode = "rmii";
172 	mac-address = [00 00 00 00 00 00];
176 		#address-cells = <1>;
177 		#size-cells = <0>;
179 		eth_phy: ethernet-phy@0 {
188 	usb-role-switch;
191 		compatible = "usb-c-connector";
192 		label = "USB-C";
205 			bias-pull-up;
206 			input-enable;
214 			bias-disable;
222 			bias-disable;
229 			output-high;
234 			input-enable;
235 			bias-pull-up;