Lines Matching +full:power +full:- +full:managed

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4  * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
12 /dts-v1/;
14 #include <dt-bindings/gpio/gpio.h>
15 #include "armada-372x.dtsi"
19 		stdout-path = "serial0:115200n8";
28 		compatible = "gpio-leds";
30 		led-power1 {
31 			label = "udpu:green:power";
35 		led-power2 {
36 			label = "udpu:red:power";
40 		led-network1 {
45 		led-network2 {
50 		led-alarm1 {
55 		led-alarm2 {
61 	sfp_eth1: sfp-eth1 {
63 		i2c-bus = <&i2c1>;
64 		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
65 		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
66 		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
67 		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
68 		maximum-power-milliwatt = <3000>;
74 	bus-width = <8>;
75 	mmc-ddr-1_8v;
76 	mmc-hs400-1_8v;
77 	marvell,pad-type = "fixed-1-8v";
78 	non-removable;
79 	no-sd;
80 	no-sdio;
85 	pinctrl-names = "default";
86 	pinctrl-0 = <&spi_quad_pins>;
89 		compatible = "jedec,spi-nor";
91 		spi-max-frequency = <54000000>;
94 			compatible = "fixed-partitions";
95 			#address-cells = <1>;
96 			#size-cells = <1>;
104 				label = "u-boot-env";
112 	i2c2_recovery_pins: i2c2-recovery-pins {
120 	pinctrl-names = "default", "recovery";
121 	pinctrl-0 = <&i2c2_pins>;
122 	pinctrl-1 = <&i2c2_recovery_pins>;
123 	/delete-property/mrvl,i2c-fast-mode;
124 	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
125 	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
127 	temp-sensor@48 {
132 	temp-sensor@49 {
140 	managed = "in-band-status";
145 	phy-mode = "sgmii";
147 	managed = "in-band-status";
155 	phy-names = "usb2-utmi-otg-phy";