dts/marvell/armada-3720-gl-mv1000.dts

1 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
3 /dts-v1/;
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include "armada-372x.dtsi"
9 	model = "GL.iNet GL-MV1000";
10 	compatible = "glinet,gl-mv1000", "marvell,armada3720";
13 		led-boot = &led_power;
14 		led-failsafe = &led_power;
15 		led-running = &led_power;
16 		led-upgrade = &led_power;
20 		stdout-path = "serial0:115200n8";
29 		compatible = "regulator-gpio";
30 		regulator-name = "vcc_sd1";
31 		regulator-min-microvolt = <1800000>;
32 		regulator-max-microvolt = <3300000>;
33 		regulator-boot-on;
35 		gpios-states = <0>;
38 		enable-active-high;
42 		compatible = "gpio-keys";
58 		compatible = "gpio-leds";
73 			default-state = "on";
83 		compatible = "jedec,spi-nor";
84 		spi-max-frequency = <104000000>;
85 		m25p,fast-read;
87 			compatible = "fixed-partitions";
88 			#address-cells = <1>;
89 			#size-cells = <1>;
97 				label = "u-boot-env";
104 				read-only;
110 				read-only;
122 	wp-inverted;
123 	bus-width = <4>;
124 	cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
125 	marvell,pad-type = "sd";
126 	no-1-8-v;
127 	vqmmc-supply = <&vcc_sd_reg1>;
132 	bus-width = <8>;
133 	mmc-ddr-1_8v;
134 	mmc-hs400-1_8v;
135 	non-removable;
136 	no-sd;
137 	no-sdio;
138 	marvell,pad-type = "fixed-1-8v";
157 		#address-cells = <1>;
158 		#size-cells = <0>;
164 			#address-cells = <1>;
165 			#size-cells = <0>;
176 				phy-handle = <&switch0phy0>;
182 				phy-handle = <&switch0phy1>;
184 				nvmem-cells = <&macaddr_factory_6>;
185 				nvmem-cell-names = "mac-address";
191 				phy-handle = <&switch0phy2>;
193 				nvmem-cells = <&macaddr_factory_6>;
194 				nvmem-cell-names = "mac-address";
199 			#address-cells = <1>;
200 			#size-cells = <0>;
216 	nvmem-cells = <&macaddr_factory_0>;
217 	nvmem-cell-names = "mac-address";
218 	phy-mode = "rgmii-id";
221 	fixed-link {
223 		full-duplex;
228 	compatible = "nvmem-cells";
229 	#address-cells = <1>;
230 	#size-cells = <1>;