Lines Matching +full:drdy +full:- +full:int +full:- +full:pin

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/leds/common.h>
8 #include <dt-bindings/phy/phy-imx8-pcie.h>
11 led-controller {
12 compatible = "gpio-leds";
13 pinctrl-names = "default";
14 pinctrl-0 = <&pinctrl_gpio_leds>;
16 led-0 {
20 default-state = "on";
21 linux,default-trigger = "heartbeat";
24 led-1 {
28 default-state = "off";
32 pcie0_refclk: clock-pcie0 {
33 compatible = "fixed-clock";
34 #clock-cells = <0>;
35 clock-frequency = <100000000>;
39 compatible = "pps-gpio";
40 pinctrl-names = "default";
41 pinctrl-0 = <&pinctrl_pps>;
47 /* off-board header */
49 pinctrl-names = "default";
50 pinctrl-0 = <&pinctrl_spi2>;
51 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
56 gpio-line-names =
68 clock-frequency = <400000>;
69 pinctrl-names = "default";
70 pinctrl-0 = <&pinctrl_i2c2>;
76 pinctrl-names = "default";
77 pinctrl-0 = <&pinctrl_accel>;
78 st,drdy-int-pin = <1>;
79 interrupt-parent = <&gpio4>;
81 interrupt-names = "INT1";
86 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
87 fsl,clkreq-unsupported;
89 clock-names = "ref";
94 pinctrl-names = "default";
95 pinctrl-0 = <&pinctrl_pcie0>;
96 reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
102 pinctrl-names = "default";
103 pinctrl-0 = <&pinctrl_uart1>;
107 /* off-board header */
109 pinctrl-names = "default";
110 pinctrl-0 = <&pinctrl_uart3>;
114 /* USB1 Type-C front panel */
116 pinctrl-names = "default";
117 pinctrl-0 = <&pinctrl_usb1>;
118 fsl,over-current-active-low;
128 adp-disable;
129 hnp-disable;
130 srp-disable;
132 usb-role-switch;
133 role-switch-default-mode = "peripheral";
137 compatible = "gpio-usb-b-connector", "usb-b-connector";
138 pinctrl-names = "default";
139 pinctrl-0 = <&pinctrl_usbcon1>;
141 label = "Type-C";
142 id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
146 /* USB2 - MiniPCIe socket */
148 fsl,permanently-attached;
149 fsl,disable-port-power-control;
163 pinctrl-names = "default";
164 pinctrl-0 = <&pinctrl_hog>;