Lines Matching +full:srp +full:- +full:disable

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Copyright 2019-2020 Variscite Ltd.
9 /dts-v1/;
11 #include <dt-bindings/usb/pd.h>
12 #include "imx8mn-var-som.dtsi"
15 model = "Variscite VAR-SOM-MX8MN Symphony evaluation board";
16 compatible = "variscite,var-som-mx8mn-symphony", "variscite,var-som-mx8mn", "fsl,imx8mn";
18 reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
19 compatible = "regulator-fixed";
20 pinctrl-names = "default";
21 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
22 regulator-name = "VSD_3V3";
23 regulator-min-microvolt = <3300000>;
24 regulator-max-microvolt = <3300000>;
26 enable-active-high;
29 gpio-keys {
30 compatible = "gpio-keys";
32 key-back {
38 key-home {
44 key-menu {
52 compatible = "gpio-leds";
57 linux,default-trigger = "heartbeat";
63 reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>;
67 clock-frequency = <400000>;
68 pinctrl-names = "default";
69 pinctrl-0 = <&pinctrl_i2c2>;
75 gpio-controller;
76 pinctrl-names = "default";
77 pinctrl-0 = <&pinctrl_pca9534>;
78 interrupt-parent = <&gpio1>;
80 #gpio-cells = <2>;
81 wakeup-source;
84 usb3-sata-sel-hog {
85 gpio-hog;
87 output-low;
88 line-name = "usb3_sata_sel";
91 som-vselect-hog {
92 gpio-hog;
94 output-low;
95 line-name = "som_vselect";
98 enet-sel-hog {
99 gpio-hog;
101 output-low;
102 line-name = "enet_sel";
115 interrupt-parent = <&gpio1>;
117 pinctrl-names = "default";
118 pinctrl-0 = <&pinctrl_ptn5150>;
123 remote-endpoint = <&usb1_drd_sw>;
132 compatible = "edt,edt-ft5406";
134 pinctrl-names = "default";
135 pinctrl-0 = <&pinctrl_captouch>;
136 interrupt-parent = <&gpio5>;
139 touchscreen-size-x = <800>;
140 touchscreen-size-y = <480>;
141 touchscreen-inverted-x;
142 touchscreen-inverted-y;
153 pinctrl-names = "default";
154 pinctrl-0 = <&pinctrl_uart1>;
160 pinctrl-names = "default";
161 pinctrl-0 = <&pinctrl_uart3>;
167 hnp-disable;
168 srp-disable;
169 adp-disable;
170 usb-role-switch;
171 disable-over-current;
172 samsung,picophy-pre-emp-curr-control = <3>;
173 samsung,picophy-dc-vol-level-adjust = <7>;
178 remote-endpoint = <&typec1_dr_sw>;