Lines Matching +full:0 +full:v_ap
53 reg = <0x0 0x20000000 0x0 0xc0000000>;
67 gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
88 i2c_max98504: i2c-gpio-0 {
91 scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
94 #size-cells = <0>;
98 reg = <0x31>;
123 i2s-controller = <&i2s0 0>, <&i2s1 0>;
151 pulldown-ohm = <0>;
152 io-channels = <&adc 0>;
159 pulldown-ohm = <0>;
161 #thermal-sensor-cells = <0>;
168 pulldown-ohm = <0>;
256 assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
281 assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
300 assigned-clock-rates = <0>, <333000000>;
336 #size-cells = <0>;
338 port@0 {
339 reg = <0>;
355 pinctrl-0 = <&te_irq>;
364 hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
372 #size-cells = <0>;
374 port@0 {
375 reg = <0>;
398 reg = <0x66>;
411 regulator-name = "VDD_ALIVE_0.9V_AP";
418 regulator-name = "VDDQ_MMC2_2.8V_AP";
428 regulator-name = "VDD1_E_1.8V_AP";
435 regulator-name = "VDD10_MIF_PLL_1.0V_AP";
445 regulator-name = "VDD10_DPLL_1.0V_AP";
455 regulator-name = "VDD10_MIPI2L_1.0V_AP";
464 regulator-name = "VDD18_MIPI2L_1.8V_AP";
474 regulator-name = "VDD18_LLI_1.8V_AP";
484 regulator-name = "VDD18_ABB_ETC_1.8V_AP";
494 regulator-name = "VDD33_USB30_3.0V_AP";
503 regulator-name = "VDD_INT_M_1.0V_AP";
513 regulator-name = "VDD_KFC_M_1.1V_AP";
520 regulator-name = "VDD_G3D_M_0.95V_AP";
530 regulator-name = "VDDQ_M1_LDO_1.2V_AP";
540 regulator-name = "VDDQ_M2_LDO_1.2V_AP";
557 regulator-name = "V_TFLASH_2.8V_AP";
563 regulator-name = "V_CODEC_1.8V_AP";
576 regulator-name = "VCC_2.8V_AP";
589 regulator-name = "CAM_IO_1.8V_AP";
595 regulator-name = "CAM_SEN_CORE_1.05V_AP";
613 regulator-name = "CAM_AF_2.8V_AP";
619 regulator-name = "VCC_3.0V_LCD_AP";
637 regulator-name = "TSP_AVDD_3.3V_AP";
650 regulator-name = "VTOUCH_1.8V_AP";
675 regulator-name = "VSIL_1.0V";
706 regulator-name = "VDD_MIF_0.9V_AP";
716 regulator-name = "VDD_EGL_1.0V_AP";
726 regulator-name = "VDD_KFC_1.0V_AP";
736 regulator-name = "VDD_INT_0.95V_AP";
746 regulator-name = "VDD_DISP_CAM0_0.9V_AP";
756 regulator-name = "VDD_G3D_0.9V_AP";
766 regulator-name = "VDD_MEM1_1.2V_AP";
773 regulator-name = "VDD_LLDO_1.35V_AP";
780 regulator-name = "VDD_MLDO_2.0V_AP";
801 reg = <0x27>;
814 reg = <0x49>;
827 reg = <0x39>;
833 reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
834 clocks = <&pmu_system_controller 0>;
839 #size-cells = <0>;
841 port@0 {
842 reg = <0>;
865 reg = <0x66>;
878 #size-cells = <0>;
880 port@0 {
883 * port@0 which is a required property. The ports
887 reg = <0>;
933 pwms = <&pwm 0 33670 0>;
961 samsung,dw-mshc-sdr-timing = <0 4>;
962 samsung,dw-mshc-ddr-timing = <0 2>;
963 samsung,dw-mshc-hs400-timing = <0 3>;
965 fifo-depth = <0x80>;
967 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
981 samsung,dw-mshc-sdr-timing = <0 4>;
982 samsung,dw-mshc-ddr-timing = <0 2>;
983 fifo-depth = <0x80>;
985 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
992 pinctrl-0 = <&pcie_bus &pcie_wlanen>;
999 assigned-clock-rates = <0>, <100000000>;
1000 interrupt-map-mask = <0 0 0 0>;
1001 interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
1028 pinctrl-0 = <&initial_alive>;
1031 PIN_IN(gpa0-0, DOWN, FAST_SR1);
1040 PIN_IN(gpa1-0, UP, FAST_SR1);
1049 PIN_IN(gpa2-0, NONE, FAST_SR1);
1058 PIN_IN(gpa3-0, DOWN, FAST_SR1);
1067 PIN_IN(gpf1-0, NONE, FAST_SR1);
1075 PIN_IN(gpf2-0, DOWN, FAST_SR1);
1080 PIN_IN(gpf3-0, DOWN, FAST_SR1);
1085 PIN_IN(gpf4-0, DOWN, FAST_SR1);
1094 PIN_IN(gpf5-0, DOWN, FAST_SR1);
1106 samsung,pin-function = <0xf>;
1112 pinctrl-0 = <&initial_cpif>;
1115 PIN_IN(gpv6-0, DOWN, FAST_SR1);
1122 pinctrl-0 = <&initial_ese>;
1125 samsung,pins = "gpj2-0";
1139 pinctrl-0 = <&initial_fsys>;
1142 PIN_IN(gpr3-0, NONE, FAST_SR1);
1152 pinctrl-0 = <&initial_imem>;
1155 PIN_IN(gpf0-0, UP, FAST_SR1);
1168 pinctrl-0 = <&initial_nfc>;
1177 pinctrl-0 = <&initial_peric>;
1180 PIN_IN(gpv7-0, DOWN, FAST_SR1);
1200 PIN_OT(gpg0-0, NONE, FAST_SR1);
1205 PIN_IN(gpd4-0, NONE, FAST_SR1);
1215 PIN_IN(gpg1-0, DOWN, FAST_SR1);
1221 PIN_IN(gpg2-0, DOWN, FAST_SR1);
1224 PIN_IN(gpg3-0, DOWN, FAST_SR1);
1232 pinctrl-0 = <&initial_touch>;
1240 pinctrl-0 = <&pwm0_out>;
1250 assigned-clocks = <&pmu_system_controller 0>;
1264 shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
1276 wm5110: audio-codec@0 {
1278 reg = <0x0>;
1282 clocks = <&pmu_system_controller 0>,
1292 wlf,micd-bias-start-time = <0x1>;
1293 wlf,micd-rate = <0x7>;
1294 wlf,micd-dbtime = <0x2>;
1296 wlf,micd-configs = <0x0 1 0>;
1298 wlf,gpsw = <0x1>;
1299 wlf,inmode = <2 0 2 0>;
1302 wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
1314 samsung,spi-feedback-delay = <0>;
1323 irled@0 {
1325 reg = <0x0>;
1332 samsung,spi-feedback-delay = <0>;