dts/amlogic/meson-g12a-x96-max.dts

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "meson-g12a.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/gpio/meson-g12a-gpio.h>
11 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
14 	compatible = "amediatech,x96-max", "amlogic,g12a";
22 	spdif_dit: audio-codec-1 {
23 		#sound-dai-cells = <0>;
24 		compatible = "linux,spdif-dit";
26 		sound-name-prefix = "DIT";
30 		stdout-path = "serial0:115200n8";
37 	cvbs-connector {
38 		compatible = "composite-video-connector";
42 				remote-endpoint = <&cvbs_vdac_out>;
47 	hdmi-connector {
48 		compatible = "hdmi-connector";
53 				remote-endpoint = <&hdmi_tx_tmds_out>;
58 	emmc_pwrseq: emmc-pwrseq {
59 		compatible = "mmc-pwrseq-emmc";
60 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
63 	sdio_pwrseq: sdio-pwrseq {
64 		compatible = "mmc-pwrseq-simple";
65 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
67 		clock-names = "ext_clock";
70 	flash_1v8: regulator-flash_1v8 {
71 		compatible = "regulator-fixed";
72 		regulator-name = "FLASH_1V8";
73 		regulator-min-microvolt = <1800000>;
74 		regulator-max-microvolt = <1800000>;
75 		vin-supply = <&vcc_3v3>;
76 		regulator-always-on;
79 	dc_in: regulator-dc_in {
80 		compatible = "regulator-fixed";
81 		regulator-name = "DC_IN";
82 		regulator-min-microvolt = <5000000>;
83 		regulator-max-microvolt = <5000000>;
84 		regulator-always-on;
87 	vcc_1v8: regulator-vcc_1v8 {
88 		compatible = "regulator-fixed";
89 		regulator-name = "VCC_1V8";
90 		regulator-min-microvolt = <1800000>;
91 		regulator-max-microvolt = <1800000>;
92 		vin-supply = <&vcc_3v3>;
93 		regulator-always-on;
96 	vcc_3v3: regulator-vcc_3v3 {
97 		compatible = "regulator-fixed";
98 		regulator-name = "VCC_3V3";
99 		regulator-min-microvolt = <3300000>;
100 		regulator-max-microvolt = <3300000>;
101 		vin-supply = <&vddao_3v3>;
102 		regulator-always-on;
106 	vcc_5v: regulator-vcc_5v {
107 		compatible = "regulator-fixed";
108 		regulator-name = "VCC_5V";
109 		regulator-min-microvolt = <5000000>;
110 		regulator-max-microvolt = <5000000>;
111 		vin-supply = <&dc_in>;
116 	vddao_1v8: regulator-vddao_1v8 {
117 		compatible = "regulator-fixed";
118 		regulator-name = "VDDAO_1V8";
119 		regulator-min-microvolt = <1800000>;
120 		regulator-max-microvolt = <1800000>;
121 		vin-supply = <&vddao_3v3>;
122 		regulator-always-on;
125 	vddao_3v3: regulator-vddao_3v3 {
126 		compatible = "regulator-fixed";
127 		regulator-name = "VDDAO_3V3";
128 		regulator-min-microvolt = <3300000>;
129 		regulator-max-microvolt = <3300000>;
130 		vin-supply = <&dc_in>;
131 		regulator-always-on;
134 	vddcpu: regulator-vddcpu {
135 		compatible = "pwm-regulator";
137 		regulator-name = "VDDCPU";
138 		regulator-min-microvolt = <721000>;
139 		regulator-max-microvolt = <1022000>;
141 		pwm-supply = <&dc_in>;
144 		pwm-dutycycle-range = <100 0>;
146 		regulator-boot-on;
147 		regulator-always-on;
151 		compatible = "amlogic,axg-sound-card";
152 		model = "X96-MAX";
153 		audio-aux-devs = <&tdmout_b>;
154 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
162 		assigned-clocks = <&clkc CLKID_MPLL2>,
165 		assigned-clock-parents = <0>, <0>, <0>;
166 		assigned-clock-rates = <294912000>,
170 		dai-link-0 {
171 			sound-dai = <&frddr_a>;
174 		dai-link-1 {
175 			sound-dai = <&frddr_b>;
178 		dai-link-2 {
179 			sound-dai = <&frddr_c>;
182 		/* 8ch hdmi interface */
183 		dai-link-3 {
184 			sound-dai = <&tdmif_b>;
185 			dai-format = "i2s";
186 			dai-tdm-slot-tx-mask-0 = <1 1>;
187 			dai-tdm-slot-tx-mask-1 = <1 1>;
188 			dai-tdm-slot-tx-mask-2 = <1 1>;
189 			dai-tdm-slot-tx-mask-3 = <1 1>;
190 			mclk-fs = <256>;
193 				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
197 		/* spdif hdmi or toslink interface */
198 		dai-link-4 {
199 			sound-dai = <&spdifout>;
201 			codec-0 {
202 				sound-dai = <&spdif_dit>;
205 			codec-1 {
206 				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
210 		/* spdif hdmi interface */
211 		dai-link-5 {
212 			sound-dai = <&spdifout_b>;
215 				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
219 		/* hdmi glue */
220 		dai-link-6 {
221 			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
224 				sound-dai = <&hdmi_tx>;
230 		compatible = "pwm-clock";
231 		#clock-cells = <0>;
232 		clock-frequency = <32768>;
242 	pinctrl-0 = <&cec_ao_a_h_pins>;
243 	pinctrl-names = "default";
245 	hdmi-phandle = <&hdmi_tx>;
249 	pinctrl-0 = <&cec_ao_b_h_pins>;
250 	pinctrl-names = "default";
252 	hdmi-phandle = <&hdmi_tx>;
260 	cpu-supply = <&vddcpu>;
261 	operating-points-v2 = <&cpu_opp_table>;
263 	clock-latency = <50000>;
267 	cpu-supply = <&vddcpu>;
268 	operating-points-v2 = <&cpu_opp_table>;
270 	clock-latency = <50000>;
274 	cpu-supply = <&vddcpu>;
275 	operating-points-v2 = <&cpu_opp_table>;
277 	clock-latency = <50000>;
281 	cpu-supply = <&vddcpu>;
282 	operating-points-v2 = <&cpu_opp_table>;
284 	clock-latency = <50000>;
289 		remote-endpoint = <&cvbs_connector_in>;
307 	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
308 	pinctrl-names = "default";
309 	hdmi-supply = <&vcc_5v>;
314 		remote-endpoint = <&hdmi_connector_in>;
320 	pinctrl-0 = <&remote_input_ao_pins>;
321 	pinctrl-names = "default";
322 	linux,rc-map-name = "rc-x96max";
326 	pinctrl-0 = <&pwm_ao_d_e_pins>;
327 	pinctrl-names = "default";
329 	clock-names = "clkin1";
334 	external_phy: ethernet-phy@0 {
337 		max-speed = <1000>;
338 		eee-broken-1000t;
340 		reset-assert-us = <10000>;
341 		reset-deassert-us = <80000>;
342 		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
344 		interrupt-parent = <&gpio_intc>;
351 	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
352 	pinctrl-names = "default";
354 	phy-mode = "rgmii";
355 	phy-handle = <&external_phy>;
356 	amlogic,tx-delay-ns = <2>;
361 	pinctrl-0 = <&pwm_e_pins>;
362 	pinctrl-names = "default";
364 	clock-names = "clkin0";
369 	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
370 	pinctrl-names = "default";
371 	uart-has-rtscts;
374 		compatible = "brcm,bcm43438-bt";
375 		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
376 		max-speed = <2000000>;
378 		clock-names = "lpo";
384 	pinctrl-0 = <&uart_ao_a_pins>;
385 	pinctrl-names = "default";
396 	pinctrl-0 = <&sdio_pins>;
397 	pinctrl-1 = <&sdio_clk_gate_pins>;
398 	pinctrl-names = "default", "clk-gate";
399 	#address-cells = <1>;
400 	#size-cells = <0>;
402 	bus-width = <4>;
403 	cap-sd-highspeed;
404 	sd-uhs-sdr50;
405 	max-frequency = <100000000>;
407 	non-removable;
408 	disable-wp;
411 	keep-power-in-suspend;
413 	mmc-pwrseq = <&sdio_pwrseq>;
415 	vmmc-supply = <&vddao_3v3>;
416 	vqmmc-supply = <&vddao_1v8>;
420 		compatible = "brcm,bcm4329-fmac";
427 	pinctrl-0 = <&sdcard_c_pins>;
428 	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
429 	pinctrl-names = "default", "clk-gate";
431 	bus-width = <4>;
432 	cap-sd-highspeed;
433 	max-frequency = <100000000>;
434 	disable-wp;
436 	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
437 	vmmc-supply = <&vddao_3v3>;
438 	vqmmc-supply = <&vddao_3v3>;
444 	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
445 	pinctrl-1 = <&emmc_clk_gate_pins>;
446 	pinctrl-names = "default", "clk-gate";
448 	bus-width = <8>;
449 	cap-mmc-highspeed;
450 	max-frequency = <100000000>;
451 	non-removable;
452 	disable-wp;
454 	mmc-pwrseq = <&emmc_pwrseq>;
455 	vmmc-supply = <&vcc_3v3>;
456 	vqmmc-supply = <&flash_1v8>;
460 	pinctrl-0 = <&spdif_out_h_pins>;
461 	pinctrl-names = "default";