ti/omap/omap4-epson-embt2ws.dts

1 // SPDX-License-Identifier: GPL-2.0-only
5 /dts-v1/;
7 #include <dt-bindings/input/input.h>
11 	model = "Epson Moverio BT-200";
19 	backlight-left {
20 		compatible = "pwm-backlight";
22 		power-supply = <&unknown_supply>;
25 	backlight-right {
26 		compatible = "pwm-backlight";
28 		power-supply = <&unknown_supply>;
32 		stdout-path = &uart3;
35 	gpio-keys {
36 		compatible = "gpio-keys";
37 		pinctrl-names = "default";
38 		pinctrl-0 = <&gpio_keys_pins>;
40 		key-lock {
44 			linux,input-type = <EV_SW>;
48 	unknown_supply: unknown-supply {
49 		compatible = "regulator-fixed";
50 		regulator-name = "unknown";
54 	wl12xx_vmmc: wl12xx-vmmc {
55 		pinctrl-names = "default";
56 		pinctrl-0 = <&wl12xx_gpio>;
57 		compatible = "regulator-fixed";
58 		regulator-name = "vwl1271";
59 		regulator-min-microvolt = <1800000>;
60 		regulator-max-microvolt = <1800000>;
62 		startup-delay-us = <70000>;
63 		enable-active-high;
68 	pinctrl-names = "default";
69 	pinctrl-0 = <&i2c1_pins>;
71 	clock-frequency = <400000>;
78 		interrupt-controller;
79 		#interrupt-cells = <1>;
82 			compatible = "ti,twl4030-rtc";
86 		ldo2: regulator-ldo2 {
87 			compatible = "ti,twl6032-ldo2";
88 			regulator-min-microvolt = <1000000>;
89 			regulator-max-microvolt = <3000000>;
92 		ldo4: regulator-ldo4 {
93 			compatible = "ti,twl6032-ldo4";
94 			regulator-min-microvolt = <1200000>;
95 			regulator-max-microvolt = <2800000>;
98 		ldo3: regulator-ldo3 {
99 			compatible = "ti,twl6032-ldo3";
100 			regulator-min-microvolt = <1000000>;
101 			regulator-max-microvolt = <3000000>;
104 		ldo5: regulator-ldo5 {
105 			compatible = "ti,twl6032-ldo5";
106 			regulator-min-microvolt = <1200000>;
107 			regulator-max-microvolt = <3000000>;
108 			ti,retain-on-reset;
111 		ldo1: regulator-ldo1 {
112 			compatible = "ti,twl6032-ldo1";
113 			regulator-min-microvolt = <1800000>;
114 			regulator-max-microvolt = <2500000>;
117 		ldo7: regulator-ldo7 {
118 			compatible = "ti,twl6032-ldo7";
119 			regulator-min-microvolt = <1200000>;
120 			regulator-max-microvolt = <2900000>;
123 		ldoln: regulator-ldoln {
124 			compatible = "ti,twl6032-ldoln";
125 			regulator-always-on;
128 		ldo6: regulator-ldo6 {  label
129 			compatible = "ti,twl6032-ldo6";
130 			regulator-always-on;
133 		ldousb: regulator-ldousb {
134 			compatible = "ti,twl6032-ldousb";
135 			regulator-always-on;
138 		vio: regulator-vio {
139 			compatible = "ti,twl6032-vio";
140 			regulator-always-on;
143 		twl_usb_comparator: usb-comparator {
144 			compatible = "ti,twl6030-usb";
150 			compatible = "ti,twl6030-pwm";
151 			#pwm-cells = <2>;
156 			compatible = "ti,twl6030-pwmled";
157 			#pwm-cells = <2>;
161 			compatible = "ti,twl6032-gpadc";
163 			#io-channel-cells = <1>;
172 	usb-supply = <&ldousb>;
177 	pinctrl-names = "default";
178 	pinctrl-0 = <&i2c2_pins>;
180 	clock-frequency = <200000>;
187 		pinctrl-names = "default";
188 		pinctrl-0 = <&mpu9150h_pins>;
189 		interrupt-parent = <&gpio2>;
192 		i2c-gate {
193 			#address-cells = <1>;
194 			#size-cells = <0>;
196 				compatible = "asahi-kasei,ak8975";
204 	pinctrl-names = "default";
205 	pinctrl-0 = <&i2c3_pins>;
207 	clock-frequency = <100000>;
213 	pinctrl-names = "default";
214 	pinctrl-0 = <&i2c4_pins>;
216 	clock-frequency = <360000>;
223 		pinctrl-names = "default";
224 		pinctrl-0 = <&tlv320aic3x_pins>;
225 		#sound-dai-cells = <0>;
227 		reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
234 	pinctrl-names = "default";
235 	pinctrl-0 = <&keypad_pins>;
236 	keypad,num-rows = <2>;
237 	keypad,num-columns = <3>;
244 	linux,input-no-autorepeat;
248 	#sound-dai-cells = <0>;
249 	pinctrl-names = "default";
250 	pinctrl-0 = <&mcbsp2_pins>;
257 	vmmc-supply = <&ldo5>;
258 	broken-cd;
259 	bus-width = <4>;
264 	vmmc-supply = <&ldo2>;
265 	bus-width = <8>;
269 	pinctrl-names = "default";
270 	pinctrl-0 = <&wl12xx_pins>;
271 	vmmc-supply = <&wl12xx_vmmc>;
272 	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
274 	non-removable;
275 	bus-width = <4>;
276 	cap-power-off-card;
278 	#address-cells = <1>;
279 	#size-cells = <0>;
283 		interrupts-extended = <&gpio1 23 IRQ_TYPE_LEVEL_HIGH>;
284 		interrupt-names = "irq";
285 		ref-clock-frequency = <26000000>;
286 		tcxo-clock-frequency = <26000000>;
299 	bt_pins: pinmux-bt-pins {
300 		pinctrl-single,pins = <
305 	gpio_keys_pins: pinmux-gpio-key-pins {
306 		pinctrl-single,pins = <
311 	i2c1_pins: pinmux-i2c1-pins {
312 		pinctrl-single,pins = <
318 	i2c2_pins: pinmux-i2c2-pins {
319 		pinctrl-single,pins = <
325 	i2c3_pins: pinmux-i2c3-pins {
326 		pinctrl-single,pins = <
332 	i2c4_pins: pinmux-i2c4-pins {
333 		pinctrl-single,pins = <
339 	keypad_pins: pinmux-keypad-pins {
340 		pinctrl-single,pins = <
356 	mcbsp2_pins: pinmux-mcbsp2-pins {
357 		pinctrl-single,pins = <
365 	mpu9150h_pins: pinmux-mpu9150h-pins {
366 		pinctrl-single,pins = <
371 	tlv320aic3x_pins: pinmux-tlv320aic3x-pins {
372 		pinctrl-single,pins = <
377 	uart2_pins: pinmux-uart2-pins {
378 		pinctrl-single,pins = <
386 	uart3_pins: pinmux-uart3-pins {
387 		pinctrl-single,pins = <
393 	usb_otg_hs_pins: pinmux-usb-otg-hs-pins {
394 		 pinctrl-single,pins = <
401 	wl12xx_pins: pinmux-wl12xx-pins {
402 		pinctrl-single,pins = <
413 	wl12xx_gpio: pinmux-wl12xx-gpio {
414 		pinctrl-single,pins = <
421 	pinctrl-names = "default";
422 	pinctrl-0 = <&uart2_pins &bt_pins>;
423 	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
433 	pinctrl-names = "default";
434 	pinctrl-0 = <&uart3_pins>;
435 	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
440 	pinctrl-names = "default";
441 	pinctrl-0 = <&usb_otg_hs_pins>;
443 	interface-type = <1>;