dts/st/stm32mp15xx-dhcom-drc02.dtsi

1 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/pwm/pwm.h>
24 	rs485-rx-en-hog {
25 		gpio-hog;
27 		output-low;
28 		line-name = "rs485-rx-en";
33 	gpio-line-names = "", "", "", "",
34 			  "", "", "DHCOM-B", "",
35 			  "", "", "", "DRC02-Out1",
36 			  "DRC02-Out2", "", "", "";
40 	gpio-line-names = "DRC02-In1", "DHCOM-O", "DHCOM-H", "DHCOM-I",
41 			  "DHCOM-R", "DHCOM-M", "", "",
42 			  "DRC02-In2", "", "", "",
52 	usb-hub-hog {
53 		gpio-hog;
55 		output-high;
56 		line-name = "usb-hub-reset";
60 &i2c2 {
61 	pinctrl-names = "default";
62 	pinctrl-0 = <&i2c2_pins_a>;
63 	i2c-scl-rising-time-ns = <185>;
64 	i2c-scl-falling-time-ns = <20>;
67 	/delete-property/dmas;
68 	/delete-property/dma-names;
85 	pinctrl-names = "default";
86 	pinctrl-0 = <&i2c5_pins_a>;
87 	i2c-scl-rising-time-ns = <185>;
88 	i2c-scl-falling-time-ns = <20>;
91 	/delete-property/dmas;
92 	/delete-property/dma-names;
98 	 * are used for on-board microSD slot instead.
100 	/delete-property/broken-cd;
101 	cd-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>;
102 	disable-wp;
106 	pinctrl-names = "default";
107 	pinctrl-0 = <&spi1_pins_a>;
108 	cs-gpios = <&gpioz 3 0>;
110 	/delete-property/dmas;
111 	/delete-property/dma-names;
120 	pinctrl-names = "default";
121 	pinctrl-0 = <&usart3_pins_a>;
122 	/delete-property/dmas;
123 	/delete-property/dma-names;
133 	linux,rs485-enabled-at-boot-time;
134 	pinctrl-names = "default";
135 	pinctrl-0 = <&uart8_pins_a>;
136 	rts-gpios = <&gpioe 6 GPIO_ACTIVE_HIGH>;
137 	/delete-property/dmas;
138 	/delete-property/dma-names;
152 	phy-supply = <&vdd_usb>;
156 	phy-supply = <&vdd_usb>;