Lines Matching +full:0 +full:v_ap
39 reg = <0x0204f000 0x1000>;
45 clock-frequency = <0>;
136 pinctrl-0 = <&gpio_keys>;
171 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
175 #size-cells = <0>;
182 pinctrl-0 = <&max77693_irq>;
183 reg = <0x66>;
196 #size-cells = <0>;
198 port@0 {
199 reg = <0>;
234 pwms = <&pwm 0 38022 0>;
255 #size-cells = <0>;
262 pinctrl-0 = <&max77693_fuel_irq>;
263 reg = <0x36>;
276 #size-cells = <0>;
280 reg = <0x20>;
295 #size-cells = <0>;
297 pinctrl-0 = <&i2c_mhl_bus>;
309 reg = <0x39>;
313 #size-cells = <0>;
315 port@0 {
316 reg = <0>;
336 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
348 sound-dai = <&i2s0 0>;
357 pullup-uv = <1800000>; /* VCC_1.8V_AP */
365 pullup-uv = <1800000>; /* VCC_1.8V_AP */
425 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
460 assigned-clock-rates = <0>, <176000000>;
480 assigned-clock-rates = <0>, <176000000>;
512 assigned-clock-rates = <0>, <176000000>;
520 assigned-clock-rates = <0>, <176000000>;
528 assigned-clock-rates = <0>, <176000000>;
536 assigned-clock-rates = <0>, <176000000>;
540 pinctrl-0 = <&fimc_is_uart>;
565 pinctrl-0 = <&hdmi_hpd>;
574 #size-cells = <0>;
602 samsung,i2c-slave-addr = <0x10>;
604 pinctrl-0 = <&i2c0_bus>;
610 reg = <0x3c>;
619 clocks = <&camera 0>;
632 pinctrl-0 = <&fimc_is_i2c1>;
637 reg = <0x10>;
658 samsung,i2c-slave-addr = <0x10>;
660 pinctrl-0 = <&i2c3_bus>;
667 samsung,i2c-slave-addr = <0x10>;
669 pinctrl-0 = <&i2c4_bus>;
675 reg = <0x1a>;
676 clocks = <&pmu_system_controller 0>,
686 #sound-dai-cells = <0>;
688 wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
689 0x0 0x8000 0x0 0x0 0x0>;
690 wlf,micbias-cfg = <0x2f 0x2b>;
716 samsung,i2c-slave-addr = <0x10>;
718 pinctrl-0 = <&i2c7_bus>;
726 pinctrl-0 = <&max77686_irq>;
729 reg = <0x09>;
734 regulator-name = "VALIVE_1.0V_AP";
741 regulator-name = "VM1M2_1.2V_AP";
751 regulator-name = "VCC_1.8V_AP";
758 regulator-name = "VCC_2.8V_AP";
772 regulator-name = "VMPLL_1.0V_AP";
782 regulator-name = "VPLL_1.0V_AP";
792 regulator-name = "VMIPI_1.0V";
826 regulator-name = "VUOTG_3.0V";
851 regulator-name = "VHSIC_1.0V";
896 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
923 regulator-name = "MOTOR_VCC_3.0V";
972 regulator-name = "VMEM_1.2V_AP";
986 regulator-name = "VCC_SUB_2.0V";
993 regulator-name = "VMEM_VDDF_3.0V";
1013 pinctrl-0 = <&i2s0_bus>;
1028 samsung,dw-mshc-ciu-div = <0>;
1032 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
1040 assigned-clocks = <&pmu_system_controller 0>;
1046 pinctrl-0 = <&sleep0>;
1061 PIN_SLP(gpa0-0, INPUT, NONE);
1070 PIN_SLP(gpa1-0, INPUT, DOWN);
1077 PIN_SLP(gpb-0, INPUT, NONE);
1086 PIN_SLP(gpc0-0, INPUT, DOWN);
1092 PIN_SLP(gpc1-0, INPUT, NONE);
1098 PIN_SLP(gpd0-0, INPUT, DOWN);
1103 PIN_SLP(gpd1-0, INPUT, DOWN);
1108 PIN_SLP(gpf0-0, INPUT, NONE);
1117 PIN_SLP(gpf1-0, INPUT, DOWN);
1126 PIN_SLP(gpf2-0, PREV, NONE);
1135 PIN_SLP(gpf3-0, INPUT, NONE);
1142 PIN_SLP(gpj0-0, PREV, NONE);
1151 PIN_SLP(gpj1-0, INPUT, DOWN);
1161 pinctrl-0 = <&sleep1>;
1209 PIN_SLP(gpk0-0, PREV, NONE);
1217 PIN_SLP(gpk1-0, INPUT, DOWN);
1225 PIN_SLP(gpk2-0, INPUT, DOWN);
1233 PIN_SLP(gpk3-0, OUT0, NONE);
1241 PIN_SLP(gpl0-0, INPUT, DOWN);
1248 PIN_SLP(gpl1-0, INPUT, DOWN);
1250 PIN_SLP(gpl2-0, INPUT, DOWN);
1259 PIN_SLP(gpm0-0, INPUT, DOWN);
1268 PIN_SLP(gpm1-0, INPUT, DOWN);
1276 PIN_SLP(gpm2-0, INPUT, NONE);
1282 PIN_SLP(gpm3-0, PREV, NONE);
1291 PIN_SLP(gpm4-0, INPUT, DOWN);
1300 PIN_SLP(gpy0-0, INPUT, DOWN);
1307 PIN_SLP(gpy1-0, INPUT, DOWN);
1312 PIN_SLP(gpy2-0, PREV, NONE);
1319 PIN_SLP(gpy3-0, INPUT, DOWN);
1328 PIN_SLP(gpy4-0, INPUT, DOWN);
1337 PIN_SLP(gpy5-0, INPUT, DOWN);
1346 PIN_SLP(gpy6-0, INPUT, DOWN);
1359 pinctrl-0 = <&sleep2>;
1362 PIN_SLP(gpz-0, INPUT, DOWN);
1374 pinctrl-0 = <&sleep3>;
1377 PIN_SLP(gpv0-0, INPUT, DOWN);
1386 PIN_SLP(gpv1-0, INPUT, DOWN);
1395 PIN_SLP(gpv2-0, INPUT, DOWN);
1404 PIN_SLP(gpv3-0, INPUT, DOWN);
1413 PIN_SLP(gpv4-0, INPUT, DOWN);
1418 pinctrl-0 = <&pwm0_out>;
1420 samsung,pwm-outputs = <0>;
1433 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1441 #size-cells = <0>;
1447 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1460 pinctrl-0 = <&uart0_data &uart0_fctl>;
1466 pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
1490 pinctrl-0 = <&spi1_bus>;
1494 s5c73m3_spi: image-sensor@0 {
1497 reg = <0>;