dts/renesas/r7s72100-rskrza1.dts

1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
24 		stdout-path = "serial0:115200n8";
33 		compatible = "gpio-keys";
35 		pinctrl-names = "default";
36 		pinctrl-0 = <&keyboard_pins>;
38 		key-1 {
39 			interrupt-parent = <&irqc>;
40 			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
43 			wakeup-source;
46 		key-2 {
47 			interrupt-parent = <&irqc>;
51 			wakeup-source;
54 		key-3 {
55 			interrupt-parent = <&irqc>;
59 			wakeup-source;
64 		#address-cells = <1>;
65 		#size-cells = <1>;
69 		compatible = "gpio-leds";
90 	clock-frequency = <13330000>;
94 	pinctrl-names = "default";
95 	pinctrl-0 = <&i2c3_pins>;
98 	clock-frequency = <400000>;
103 		gpio-controller;
104 		#gpio-cells = <2>;
110 		gpio-controller;
111 		#gpio-cells = <2>;
122 	clock-frequency = <48000000>;
126 	clock-frequency = <32768>;
129 &pinctrl {
137 		pinmux = <RZA1_PINMUX(1, 9, 3)>,	/* IRQ3 */
138 			 <RZA1_PINMUX(1, 8, 3)>,	/* IRQ2 */
139 			 <RZA1_PINMUX(1, 11, 3)>;	/* IRQ5 */
144 		pinmux = <RZA1_PINMUX(3, 0, 6)>,	/* TxD2 */
145 			 <RZA1_PINMUX(3, 2, 4)>;	/* RxD2 */
150 		/* Ethernet on Ports 1,2,3,5 */
153 			 <RZA1_PINMUX(3, 3, 2)>,	/* ET_MDIO  */
154 			 <RZA1_PINMUX(3, 4, 2)>,	/* ET_RXCLK */
155 			 <RZA1_PINMUX(3, 5, 2)>,	/* ET_RXER  */
156 			 <RZA1_PINMUX(3, 6, 2)>,	/* ET_RXDV  */
160 			 <RZA1_PINMUX(2, 3, 2)>,	/* ET_CRS   */
173 		pinmux = <RZA1_PINMUX(3, 8, 7)>,	/* SD_CD_1 */
174 			 <RZA1_PINMUX(3, 9, 7)>,	/* SD_WP_1 */
175 			 <RZA1_PINMUX(3, 10, 7)>,	/* SD_D1_1 */
176 			 <RZA1_PINMUX(3, 11, 7)>,	/* SD_D0_1 */
177 			 <RZA1_PINMUX(3, 12, 7)>,	/* SD_CLK_1 */
178 			 <RZA1_PINMUX(3, 13, 7)>,	/* SD_CMD_1 */
179 			 <RZA1_PINMUX(3, 14, 7)>,	/* SD_D3_1 */
180 			 <RZA1_PINMUX(3, 15, 7)>;	/* SD_D2_1 */
189 	pinctrl-names = "default";
190 	pinctrl-0 = <&ether_pins>;
192 	renesas,no-ether-link;
193 	phy-handle = <&phy0>;
194 	phy0: ethernet-phy@0 {
195 		compatible = "ethernet-phy-idb824.2814",
196 			     "ethernet-phy-ieee802.3-c22";
202 	pinctrl-names = "default";
203 	pinctrl-0 = <&sdhi1_pins>;
204 	bus-width = <4>;
221 	pinctrl-names = "default";
222 	pinctrl-0 = <&scif2_pins>;