dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts

1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-msm8974.dtsi"
4 #include "pm8941.dtsi"
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/leds/common.h>
7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
12 	chassis-type = "handset";
20 		stdout-path = "serial0:115200n8";
23 	gpio-keys {
24 		compatible = "gpio-keys";
26 		pinctrl-names = "default";
27 		pinctrl-0 = <&gpio_keys_pin_a>;
29 		key-volume-up {
32 			linux,input-type = <1>;
36 		key-volume-down {
39 			linux,input-type = <1>;
45 		compatible = "clk-pwm";
48 		pinctrl-0 = <&vibrator_pin>;
49 		pinctrl-names = "default";
51 		#pwm-cells = <2>;
55 		compatible = "pwm-vibrator";
57 		pwm-names = "enable";
59 		vcc-supply = <&pm8941_l19>;
60 		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
63 	vreg_wlan: wlan-regulator {
64 		compatible = "regulator-fixed";
66 		regulator-name = "wl-reg";
67 		regulator-min-microvolt = <3300000>;
68 		regulator-max-microvolt = <3300000>;
71 		enable-active-high;
73 		pinctrl-names = "default";
74 		pinctrl-0 = <&wlan_regulator_pin>;
80 	clock-frequency = <100000>;
82 	charger: bq24192@6b {  label
85 		interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
87 		omit-battery-class;
89 		usb_otg_vbus: usb-otg-vbus { };
96 		maxim,double-soc;
99 		interrupt-parent = <&tlmm>;
102 		pinctrl-names = "default";
103 		pinctrl-0 = <&fuelgauge_pin>;
105 		maxim,alert-low-soc-level = <2>;
111 	clock-frequency = <355000>;
114 		compatible = "syna,rmi4-i2c";
117 		interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>;
118 		vdd-supply = <&pm8941_l22>;
119 		vio-supply = <&pm8941_lvs3>;
121 		pinctrl-names = "default";
122 		pinctrl-0 = <&touch_pin>;
124 		#address-cells = <1>;
125 		#size-cells = <0>;
127 		rmi4-f01@1 {
129 			syna,nosleep-mode = <1>;
132 		rmi4-f12@12 {
134 			syna,sensor-type = <1>;
141 	clock-frequency = <100000>;
146 		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
147 		vdd-supply = <&pm8941_l17>;
148 		vddio-supply = <&pm8941_lvs1>;
149 		led-max-microamp = <100000>;
150 		amstaos,proximity-diodes = <0>;
156 	clock-frequency = <355000>;
158 	led-controller@38 {
163 		#address-cells = <1>;
164 		#size-cells = <0>;
168 			led-sources = <0 1>;
169 			label = "lcd-backlight";
170 			default-brightness = <200>;
177 	clock-frequency = <100000>;
182 		interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>;
183 		vddio-supply = <&pm8941_lvs1>;
185 		pinctrl-names = "default";
186 		pinctrl-0 = <&mpu6515_pin>;
188 		mount-matrix = "0", "-1", "0",
189 				"-1", "0", "0",
192 		i2c-gate {
193 			#address-cells = <1>;
194 			#size-cells = <0>;
196 				compatible = "asahi-kasei,ak8963";
199 				vid-supply = <&pm8941_lvs1>;
200 				vdd-supply = <&pm8941_l17>;
206 				vdda-supply = <&pm8941_lvs1>;
207 				vddd-supply = <&pm8941_l17>;
221 		compatible = "brcm,bcm43438-bt";
222 		max-speed = <3000000>;
224 		pinctrl-names = "default";
225 		pinctrl-0 = <&bt_pin>;
227 		host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
228 		device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
229 		shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
240 	vdda-supply = <&pm8941_l2>;
241 	vdd-supply = <&pm8941_lvs3>;
242 	vddio-supply = <&pm8941_l12>;
246 		compatible = "lg,acx467akm-7";
248 		pinctrl-names = "default";
249 		pinctrl-0 = <&panel_pin>;
253 				remote-endpoint = <&mdss_dsi0_out>;
260 	remote-endpoint = <&panel_in>;
261 	data-lanes = <0 1 2 3>;
267 	vddio-supply = <&pm8941_l12>;
271 	gpio_keys_pin_a: gpio-keys-active-state {
275 		bias-pull-up;
276 		power-source = <PM8941_GPIO_S3>;
279 	fuelgauge_pin: fuelgauge-int-state {
283 		bias-disable;
284 		input-enable;
285 		power-source = <PM8941_GPIO_S3>;
288 	wlan_sleep_clk_pin: wl-sleep-clk-state {
292 		output-high;
293 		power-source = <PM8941_GPIO_S3>;
296 	wlan_regulator_pin: wl-reg-active-state {
300 		bias-disable;
301 		power-source = <PM8941_GPIO_S3>;
305 		gpio-hog;
307 		output-high;
308 		line-name = "otg-gpio";
315 	qcom,power-source = <1>;
317 	multi-led {
321 		#address-cells = <1>;
322 		#size-cells = <0>;
342 	cx-supply = <&pm8841_s2>;
346 	cx-supply = <&pm8841_s2>;
347 	mss-supply = <&pm8841_s3>;
348 	mx-supply = <&pm8841_s1>;
349 	pll-supply = <&pm8941_l12>;
353 	regulators-0 {
354 		compatible = "qcom,rpm-pm8841-regulators";
357 			regulator-min-microvolt = <675000>;
358 			regulator-max-microvolt = <1050000>;
362 			regulator-min-microvolt = <500000>;
363 			regulator-max-microvolt = <1050000>;
367 			regulator-min-microvolt = <1050000>;
368 			regulator-max-microvolt = <1050000>;
372 			regulator-min-microvolt = <815000>;
373 			regulator-max-microvolt = <900000>;
377 	regulators-1 {
378 		compatible = "qcom,rpm-pm8941-regulators";
380 		vdd_l1_l3-supply = <&pm8941_s1>;
381 		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
382 		vdd_l4_l11-supply = <&pm8941_s1>;
383 		vdd_l5_l7-supply = <&pm8941_s2>;
384 		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
385 		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
386 		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
387 		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
388 		vdd_l21-supply = <&vreg_boost>;
391 			regulator-min-microvolt = <1300000>;
392 			regulator-max-microvolt = <1300000>;
393 			regulator-always-on;
394 			regulator-boot-on;
398 			regulator-min-microvolt = <2150000>;
399 			regulator-max-microvolt = <2150000>;
400 			regulator-boot-on;
404 			regulator-min-microvolt = <1800000>;
405 			regulator-max-microvolt = <1800000>;
406 			regulator-always-on;
407 			regulator-boot-on;
411 			regulator-min-microvolt = <1225000>;
412 			regulator-max-microvolt = <1225000>;
413 			regulator-always-on;
414 			regulator-boot-on;
418 			regulator-min-microvolt = <1200000>;
419 			regulator-max-microvolt = <1200000>;
423 			regulator-min-microvolt = <1225000>;
424 			regulator-max-microvolt = <1225000>;
428 			regulator-min-microvolt = <1225000>;
429 			regulator-max-microvolt = <1225000>;
433 			regulator-min-microvolt = <1800000>;
434 			regulator-max-microvolt = <1800000>;
438 			regulator-min-microvolt = <1800000>;
439 			regulator-max-microvolt = <1800000>;
440 			regulator-boot-on;
444 			regulator-min-microvolt = <1800000>;
445 			regulator-max-microvolt = <1800000>;
446 			regulator-boot-on;
450 			regulator-min-microvolt = <1800000>;
451 			regulator-max-microvolt = <1800000>;
455 			regulator-min-microvolt = <1800000>;
456 			regulator-max-microvolt = <2950000>;
460 			regulator-min-microvolt = <1800000>;
461 			regulator-max-microvolt = <2950000>;
465 			regulator-min-microvolt = <1300000>;
466 			regulator-max-microvolt = <1300000>;
470 			regulator-min-microvolt = <1800000>;
471 			regulator-max-microvolt = <1800000>;
472 			regulator-always-on;
473 			regulator-boot-on;
477 			regulator-min-microvolt = <1800000>;
478 			regulator-max-microvolt = <2950000>;
479 			regulator-boot-on;
483 			regulator-min-microvolt = <1800000>;
484 			regulator-max-microvolt = <1800000>;
488 			regulator-min-microvolt = <2050000>;
489 			regulator-max-microvolt = <2050000>;
493 			regulator-min-microvolt = <2700000>;
494 			regulator-max-microvolt = <2700000>;
498 			regulator-min-microvolt = <2850000>;
499 			regulator-max-microvolt = <2850000>;
503 			regulator-min-microvolt = <2850000>;
504 			regulator-max-microvolt = <2850000>;
508 			regulator-min-microvolt = <3000000>;
509 			regulator-max-microvolt = <3300000>;
513 			regulator-min-microvolt = <2950000>;
514 			regulator-max-microvolt = <2950000>;
515 			regulator-system-load = <200000>;
516 			regulator-allow-set-load;
517 			regulator-boot-on;
521 			regulator-min-microvolt = <2950000>;
522 			regulator-max-microvolt = <2950000>;
523 			regulator-boot-on;
527 			regulator-min-microvolt = <3000000>;
528 			regulator-max-microvolt = <3300000>;
532 			regulator-min-microvolt = <3000000>;
533 			regulator-max-microvolt = <3000000>;
537 			regulator-min-microvolt = <3075000>;
538 			regulator-max-microvolt = <3075000>;
539 			regulator-boot-on;
550 	vmmc-supply = <&pm8941_l20>;
551 	vqmmc-supply = <&pm8941_s3>;
553 	pinctrl-names = "default", "sleep";
554 	pinctrl-0 = <&sdc1_on>;
555 	pinctrl-1 = <&sdc1_off>;
561 	max-frequency = <100000000>;
562 	vmmc-supply = <&vreg_wlan>;
563 	vqmmc-supply = <&pm8941_s3>;
564 	non-removable;
566 	pinctrl-names = "default", "sleep";
567 	pinctrl-0 = <&sdc2_on>;
568 	pinctrl-1 = <&sdc2_off>;
571 		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
574 		brcm,drive-strength = <10>;
576 		pinctrl-names = "default";
577 		pinctrl-0 = <&wlan_sleep_clk_pin>;
582 	sdc1_on: sdc1-on-state {
583 		clk-pins {
585 			drive-strength = <16>;
586 			bias-disable;
589 		cmd-data-pins {
591 			drive-strength = <10>;
592 			bias-pull-up;
596 	sdc2_on: sdc2-on-state {
597 		clk-pins {
599 			drive-strength = <6>;
600 			bias-disable;
603 		cmd-data-pins {
605 			drive-strength = <6>;
606 			bias-pull-up;
610 	mpu6515_pin: mpu6515-state {
613 		bias-disable;
616 	touch_pin: touch-state {
617 		int-pins {
621 			drive-strength = <2>;
622 			bias-disable;
625 		reset-pins {
629 			drive-strength = <2>;
630 			bias-pull-up;
634 	panel_pin: panel-state {
637 		drive-strength = <2>;
638 		bias-disable;
641 	bt_pin: bt-state {
642 		hostwake-pins {
647 		devwake-pins {
652 		shutdown-pins {
658 	vibrator_pin: vibrator-state {
659 		core-pins {
662 			drive-strength = <6>;
663 			bias-disable;
666 		enable-pins {
669 			drive-strength = <2>;
670 			bias-disable;
679 	phy-select = <&tcsr 0xb000 0>;
681 	extcon = <&charger>, <&usb_id>;
682 	vbus-supply = <&usb_otg_vbus>;
684 	hnp-disable;
685 	srp-disable;
686 	adp-disable;
692 	v1p8-supply = <&pm8941_l6>;
693 	v3p3-supply = <&pm8941_l24>;
695 	qcom,init-seq = /bits/ 8 <0x1 0x64>;