Lines Matching +full:controlled +full:- +full:remotely
1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/gpio/gpio.h>
3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/leds/common.h>
5 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
6 #include "qcom-msm8974.dtsi"
10 /delete-node/ &mpss_region;
14 compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
23 stdout-path = "serial0:115200n8";
26 gpio-keys {
27 compatible = "gpio-keys";
30 pinctrl-0 = <&msm_keys_default>;
31 pinctrl-names = "default";
33 button-volup {
39 button-general {
46 reserved-memory {
49 no-map;
59 qcom,controlled-remotely;
64 clock-frequency = <200000>;
70 read-only;
83 vdda-supply = <&pm8941_l2>;
84 vdd-supply = <&pm8941_l22>;
85 vddio-supply = <&pm8941_l12>;
90 compatible = "sharp,ls043t1le01-qhd";
93 avdd-supply = <&pm8941_l22>;
95 reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
99 remote-endpoint = <&mdss_dsi0_out>;
106 remote-endpoint = <&panel_in>;
107 data-lanes = <0 1 2 3>;
113 vddio-supply = <&pm8941_l12>;
125 msm_keys_default: pm8941-gpio-keys-state {
128 input-enable;
129 drive-push-pull;
130 bias-pull-up;
131 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
132 power-source = <PM8941_GPIO_S3>; /* 1.8V */
137 qcom,power-source = <1>;
165 qcom,cs-out;
166 qcom,switching-freq = <3200>;
168 qcom,num-strings = <1>;
174 cx-supply = <&pm8841_s2>;
176 firmware-name = "qcom/apq8074/adsp.mbn";
182 cx-supply = <&pm8841_s2>;
183 mss-supply = <&pm8841_s3>;
184 mx-supply = <&pm8841_s1>;
185 pll-supply = <&pm8941_l12>;
187 firmware-name = "qcom/apq8074/mba.mbn", "qcom/apq8074/modem.mbn";
193 regulators-0 {
194 compatible = "qcom,rpm-pm8841-regulators";
197 regulator-min-microvolt = <675000>;
198 regulator-max-microvolt = <1050000>;
202 regulator-min-microvolt = <500000>;
203 regulator-max-microvolt = <1050000>;
207 regulator-min-microvolt = <500000>;
208 regulator-max-microvolt = <1050000>;
212 regulator-min-microvolt = <500000>;
213 regulator-max-microvolt = <1050000>;
217 regulators-1 {
218 compatible = "qcom,rpm-pm8941-regulators";
220 vdd_l1_l3-supply = <&pm8941_s1>;
221 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
222 vdd_l4_l11-supply = <&pm8941_s1>;
223 vdd_l5_l7-supply = <&pm8941_s2>;
224 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
225 vin_5vs-supply = <&pm8941_5v>;
228 regulator-min-microvolt = <1300000>;
229 regulator-max-microvolt = <1300000>;
230 regulator-always-on;
231 regulator-boot-on;
235 regulator-min-microvolt = <2150000>;
236 regulator-max-microvolt = <2150000>;
237 regulator-boot-on;
241 regulator-min-microvolt = <1800000>;
242 regulator-max-microvolt = <1800000>;
243 regulator-always-on;
244 regulator-boot-on;
248 regulator-min-microvolt = <1225000>;
249 regulator-max-microvolt = <1225000>;
250 regulator-always-on;
251 regulator-boot-on;
255 regulator-min-microvolt = <1200000>;
256 regulator-max-microvolt = <1200000>;
260 regulator-min-microvolt = <1225000>;
261 regulator-max-microvolt = <1225000>;
265 regulator-min-microvolt = <1225000>;
266 regulator-max-microvolt = <1225000>;
270 regulator-min-microvolt = <1800000>;
271 regulator-max-microvolt = <1800000>;
275 regulator-min-microvolt = <1800000>;
276 regulator-max-microvolt = <1800000>;
277 regulator-boot-on;
281 regulator-min-microvolt = <1800000>;
282 regulator-max-microvolt = <1800000>;
283 regulator-boot-on;
287 regulator-min-microvolt = <1800000>;
288 regulator-max-microvolt = <1800000>;
292 regulator-min-microvolt = <1800000>;
293 regulator-max-microvolt = <2950000>;
297 regulator-min-microvolt = <1800000>;
298 regulator-max-microvolt = <1800000>;
299 regulator-always-on;
303 regulator-min-microvolt = <1300000>;
304 regulator-max-microvolt = <1300000>;
308 regulator-min-microvolt = <1800000>;
309 regulator-max-microvolt = <1800000>;
310 regulator-always-on;
311 regulator-boot-on;
315 regulator-min-microvolt = <1800000>;
316 regulator-max-microvolt = <2950000>;
317 regulator-boot-on;
321 regulator-min-microvolt = <1800000>;
322 regulator-max-microvolt = <1800000>;
326 regulator-min-microvolt = <2050000>;
327 regulator-max-microvolt = <2050000>;
331 regulator-min-microvolt = <2700000>;
332 regulator-max-microvolt = <2700000>;
336 regulator-min-microvolt = <2700000>;
337 regulator-max-microvolt = <2700000>;
341 regulator-min-microvolt = <2850000>;
342 regulator-max-microvolt = <2850000>;
346 regulator-min-microvolt = <3300000>;
347 regulator-max-microvolt = <3300000>;
348 regulator-always-on;
352 regulator-min-microvolt = <2950000>;
353 regulator-max-microvolt = <2950000>;
354 regulator-system-load = <200000>;
355 regulator-allow-set-load;
356 regulator-boot-on;
360 regulator-min-microvolt = <2950000>;
361 regulator-max-microvolt = <2950000>;
362 regulator-boot-on;
366 regulator-min-microvolt = <3000000>;
367 regulator-max-microvolt = <3000000>;
371 regulator-min-microvolt = <3000000>;
372 regulator-max-microvolt = <3000000>;
376 regulator-min-microvolt = <3075000>;
377 regulator-max-microvolt = <3075000>;
378 regulator-boot-on;
386 vmmc-supply = <&pm8941_l20>;
387 vqmmc-supply = <&pm8941_s3>;
389 pinctrl-names = "default", "sleep";
390 pinctrl-0 = <&sdc1_on>;
391 pinctrl-1 = <&sdc1_off>;
397 cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
398 vmmc-supply = <&pm8941_l21>;
399 vqmmc-supply = <&pm8941_l13>;
401 pinctrl-names = "default", "sleep";
402 pinctrl-0 = <&sdc2_on>;
403 pinctrl-1 = <&sdc2_off>;
407 sdc1_on: sdc1-on-state {
408 clk-pins {
410 drive-strength = <16>;
411 bias-disable;
414 cmd-data-pins {
416 drive-strength = <10>;
417 bias-pull-up;
421 sdc2_on: sdc2-on-state {
422 clk-pins {
424 drive-strength = <10>;
425 bias-disable;
428 cmd-data-pins {
430 drive-strength = <6>;
431 bias-pull-up;
434 cd-pins {
437 drive-strength = <2>;
438 bias-disable;
447 phy-select = <&tcsr 0xb000 1>;
449 vbus-supply = <&chg_otg>;
450 hnp-disable;
451 srp-disable;
452 adp-disable;
457 v3p3-supply = <&pm8941_l24>;
458 v1p8-supply = <&pm8941_l6>;
460 qcom,init-seq = /bits/ 8 <0x1 0x63>;