Lines Matching +full:vdda_phy +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-apq8064-v2.0.dtsi"
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/leds/common.h>
5 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
9 compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
22 stdout-path = "serial0:115200n8";
26 compatible = "gpio-leds";
27 pinctrl-names = "default";
28 pinctrl-0 = <¬ify_led>;
30 led-user1 {
34 default-state = "on";
38 hdmi-out {
39 compatible = "hdmi-connector";
44 remote-endpoint = <&hdmi_out>;
49 sdcc4_pwrseq: pwrseq-sdcc4 {
50 pinctrl-names = "default";
51 pinctrl-0 = <&wlan_default_gpios>;
52 compatible = "mmc-pwrseq-simple";
53 reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
56 ext_3p3v: regulator-ext-3p3v {
57 compatible = "regulator-fixed";
58 regulator-min-microvolt = <3300000>;
59 regulator-max-microvolt = <3300000>;
60 regulator-name = "ext_3p3v";
61 regulator-type = "voltage";
62 startup-delay-us = <0>;
64 enable-active-high;
65 regulator-boot-on;
75 clock-frequency = <200000>;
99 /* CAM I2C MIPI-CSI connector */
110 num-cs = <1>;
111 cs-gpios = <&tlmm_pinmux 53 0>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&gsbi6_uart_4pins>;
132 pinctrl-names = "default";
133 pinctrl-0 = <&gsbi7_uart_2pins>;
138 core-vdda-supply = <&pm8921_hdmi_switch>;
139 hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
144 remote-endpoint = <&mdp_dtv_out>;
148 remote-endpoint = <&hdmi_con>;
153 core-vdda-supply = <&pm8921_hdmi_switch>;
161 remote-endpoint = <&hdmi_in>;
166 vdda-supply = <&pm8921_s3>;
167 vdda_phy-supply = <&pm8921_lvs6>;
168 vdda_refclk-supply = <&ext_3p3v>;
169 pinctrl-0 = <&pcie_pins>;
170 pinctrl-names = "default";
171 perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
175 wlan_default_gpios: wlan-gpios-state {
179 bias-disable;
180 power-source = <PM8921_GPIO_S4>;
184 notify_led: nled-state {
188 bias-disable;
189 power-source = <PM8921_GPIO_S4>;
196 vin_lvs1_3_6-supply = <&pm8921_s4>;
197 vin_lvs2-supply = <&pm8921_s1>;
198 vin_lvs4_5_7-supply = <&pm8921_s4>;
200 vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
201 vdd_l24-supply = <&pm8921_s1>;
202 vdd_l25-supply = <&pm8921_s1>;
203 vdd_l26-supply = <&pm8921_s7>;
204 vdd_l27-supply = <&pm8921_s7>;
205 vdd_l28-supply = <&pm8921_s7>;
210 regulator-always-on;
211 regulator-min-microvolt = <1225000>;
212 regulator-max-microvolt = <1225000>;
213 qcom,switch-mode-frequency = <3200000>;
214 bias-pull-down;
218 regulator-min-microvolt = <1000000>;
219 regulator-max-microvolt = <1400000>;
220 qcom,switch-mode-frequency = <4800000>;
224 regulator-min-microvolt = <1800000>;
225 regulator-max-microvolt = <1800000>;
226 qcom,switch-mode-frequency = <3200000>;
230 regulator-min-microvolt = <1300000>;
231 regulator-max-microvolt = <1300000>;
232 qcom,switch-mode-frequency = <3200000>;
236 regulator-min-microvolt = <3050000>;
237 regulator-max-microvolt = <3300000>;
238 bias-pull-down;
242 regulator-min-microvolt = <1000000>;
243 regulator-max-microvolt = <1800000>;
244 bias-pull-down;
248 regulator-min-microvolt = <2750000>;
249 regulator-max-microvolt = <3000000>;
250 bias-pull-down;
254 regulator-min-microvolt = <2950000>;
255 regulator-max-microvolt = <2950000>;
256 bias-pull-down;
260 regulator-min-microvolt = <1700000>;
261 regulator-max-microvolt = <1900000>;
262 bias-pull-down;
266 bias-pull-down;
270 bias-pull-down;
280 target-supply = <&pm8921_s4>;
286 vmmc-supply = <&pm8921_l5>;
287 vqmmc-supply = <&pm8921_s4>;
293 vmmc-supply = <&pm8921_l6>;
294 pinctrl-names = "default";
295 pinctrl-0 = <&card_detect>;
296 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
302 vmmc-supply = <&ext_3p3v>;
303 vqmmc-supply = <&pm8921_lvs1>;
304 mmc-pwrseq = <&sdcc4_pwrseq>;
313 bias-disable;
324 drive-strength = <12>;
325 bias-disable;
331 v3p3-supply = <&pm8921_l3>;
332 v1p8-supply = <&pm8921_l4>;
336 v3p3-supply = <&pm8921_l3>;
337 v1p8-supply = <&pm8921_l23>;
341 v3p3-supply = <&pm8921_l3>;
342 v1p8-supply = <&pm8921_l23>;