dts/qcom/qcom-apq8064-cm-qs600.dts

1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-apq8064-v2.0.dtsi"
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
7 	model = "CompuLab CM-QS600";
8 	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
15 		stdout-path = "serial0:115200n8";
18 	sdcc4_pwrseq: pwrseq-sdcc4 {
19 		pinctrl-names = "default";
20 		pinctrl-0 = <&wlan_default_gpios>;
21 		compatible = "mmc-pwrseq-simple";
22 		reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
26 	v3p3_fixed: regulator-v3p3 {
27 		compatible = "regulator-fixed";
28 		regulator-name = "PCIE V3P3";
29 		regulator-min-microvolt = <3300000>;
30 		regulator-max-microvolt = <3300000>;
31 		regulator-always-on;
41 	clock-frequency = <200000>;
57 	pinctrl-names = "default";
58 	pinctrl-0 = <&gsbi7_uart_2pins>;
63 	vdda-supply = <&pm8921_s3>;
64 	vdda_phy-supply = <&pm8921_lvs6>;
65 	vdda_refclk-supply = <&v3p3_fixed>;
66 	pinctrl-0 = <&pcie_pins>;
67 	pinctrl-names = "default";
68 	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
73 	wlan_default_gpios: wlan-gpios-state {
77 			bias-disable;
78 			power-source = <PM8921_GPIO_S4>;
85 		vin_lvs1_3_6-supply = <&pm8921_s4>;
86 		vin_lvs2-supply = <&pm8921_s1>;
87 		vin_lvs4_5_7-supply = <&pm8921_s4>;
89 		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
90 		vdd_l24-supply = <&pm8921_s1>;
91 		vdd_l25-supply = <&pm8921_s1>;
92 		vdd_l26-supply = <&pm8921_s7>;
93 		vdd_l27-supply = <&pm8921_s7>;
94 		vdd_l28-supply = <&pm8921_s7>;
99 			regulator-always-on;
100 			regulator-min-microvolt = <1225000>;
101 			regulator-max-microvolt = <1225000>;
102 			qcom,switch-mode-frequency = <3200000>;
103 			bias-pull-down;
107 			regulator-min-microvolt = <1000000>;
108 			regulator-max-microvolt = <1400000>;
109 			qcom,switch-mode-frequency = <4800000>;
113 			regulator-min-microvolt = <1800000>;
114 			regulator-max-microvolt = <1800000>;
115 			qcom,switch-mode-frequency = <3200000>;
119 			regulator-min-microvolt = <1300000>;
120 			regulator-max-microvolt = <1300000>;
121 			qcom,switch-mode-frequency = <3200000>;
125 			regulator-min-microvolt = <3050000>;
126 			regulator-max-microvolt = <3300000>;
127 			bias-pull-down;
131 			regulator-min-microvolt = <1000000>;
132 			regulator-max-microvolt = <1800000>;
133 			bias-pull-down;
137 			regulator-min-microvolt = <2750000>;
138 			regulator-max-microvolt = <3000000>;
139 			bias-pull-down;
143 			regulator-min-microvolt = <1700000>;
144 			regulator-max-microvolt = <1900000>;
145 			bias-pull-down;
149 			bias-pull-down;
157 	vmmc-supply = <&pm8921_l5>;
158 	vqmmc-supply = <&pm8921_s4>;
164 	vmmc-supply = <&v3p3_fixed>;
165 	pinctrl-names = "default";
166 	pinctrl-0 = <&card_detect>;
167 	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
174 	vmmc-supply = <&v3p3_fixed>;
175 	vqmmc-supply = <&v3p3_fixed>;
176 	mmc-pwrseq = <&sdcc4_pwrseq>;
184 			bias-disable;
195 			drive-strength = <12>;
196 			bias-disable;
202 	v3p3-supply = <&pm8921_l3>;
203 	v1p8-supply = <&pm8921_l4>;
207 	v3p3-supply = <&pm8921_l3>;
208 	v1p8-supply = <&pm8921_l23>;
212 	v3p3-supply = <&pm8921_l3>;
213 	v1p8-supply = <&pm8921_l23>;