Lines Matching +full:pinctrl +full:- +full:names
1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
15 compatible = "simple-bus";
16 #address-cells = <1>;
17 #size-cells = <0>;
20 compatible = "regulator-fixed";
22 regulator-name = "3P3V";
23 regulator-min-microvolt = <3300000>;
24 regulator-max-microvolt = <3300000>;
25 regulator-always-on;
30 compatible = "bluegiga,apx4devkit-sgtl5000",
31 "fsl,mxs-audio-sgtl5000";
32 model = "apx4devkit-sgtl5000";
33 saif-controllers = <&saif0 &saif1>;
34 audio-codec = <&sgtl5000>;
38 compatible = "gpio-leds";
43 linux,default-trigger = "heartbeat";
49 pinctrl-names = "default";
50 pinctrl-0 = <&auart0_pins_a>;
55 pinctrl-names = "default";
56 pinctrl-0 = <&auart1_2pins_a>;
61 pinctrl-names = "default";
62 pinctrl-0 = <&auart2_2pins_a>;
67 pinctrl-names = "default";
68 pinctrl-0 = <&duart_pins_a>;
73 pinctrl-names = "default";
74 pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
79 pinctrl-names = "default";
80 pinctrl-0 = <&lcdif_24bit_pins_a
86 bits-per-pixel = <32>;
87 bus-width = <24>;
89 display-timings {
90 native-mode = <&timing0>;
92 clock-frequency = <30000000>;
95 hback-porch = <88>;
96 hfront-porch = <40>;
97 vback-porch = <32>;
98 vfront-porch = <13>;
99 hsync-len = <48>;
100 vsync-len = <3>;
101 hsync-active = <1>;
102 vsync-active = <1>;
103 de-active = <1>;
104 pixelclk-active = <0>;
111 pinctrl-names = "default";
112 pinctrl-0 = <&i2c0_pins_a>;
118 #sound-dai-cells = <0>;
119 VDDA-supply = <®_3p3v>;
120 VDDIO-supply = <®_3p3v>;
131 phy-mode = "rmii";
132 pinctrl-names = "default";
133 pinctrl-0 = <&mac0_pins_a>;
137 &pinctrl {
138 pinctrl-names = "default";
139 pinctrl-0 = <&hog_pins_a>;
143 fsl,pinmux-ids = <
147 MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
152 fsl,drive-strength = <MXS_DRIVE_4mA>;
154 fsl,pull-up = <MXS_PULL_DISABLE>;
157 lcdif_pins_apx4: lcdif-apx4@0 {
159 fsl,pinmux-ids = <
165 fsl,drive-strength = <MXS_DRIVE_4mA>;
167 fsl,pull-up = <MXS_PULL_DISABLE>;
170 mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
172 fsl,pinmux-ids = <
180 fsl,drive-strength = <MXS_DRIVE_8mA>;
182 fsl,pull-up = <MXS_PULL_ENABLE>;
185 mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
187 fsl,pinmux-ids = <
190 fsl,drive-strength = <MXS_DRIVE_12mA>;
191 fsl,pull-up = <MXS_PULL_DISABLE>;
196 pinctrl-names = "default";
197 pinctrl-0 = <&saif0_pins_a>;
202 pinctrl-names = "default";
203 pinctrl-0 = <&saif1_pins_a>;
204 fsl,saif-master = <&saif0>;
209 compatible = "fsl,imx28-mmc";
210 pinctrl-names = "default";
211 pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
212 bus-width = <4>;
217 compatible = "fsl,imx28-mmc";
218 pinctrl-names = "default";
219 pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
220 bus-width = <4>;
229 pinctrl-names = "default";
230 pinctrl-0 = <&usb1_pins_a>;