Lines Matching +full:bcm4330 +full:- +full:bt
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/input/input.h>
13 compatible = "bsh,imx6ulz-bsh-smm-m2", "fsl,imx6ull", "fsl,imx6ulz";
16 stdout-path = &uart4;
19 usdhc2_pwrseq: usdhc2-pwrseq {
20 compatible = "mmc-pwrseq-simple";
21 reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
26 pinctrl-names = "default";
27 pinctrl-0 = <&pinctrl_gpmi_nand>;
28 nand-on-flash-bbt;
37 pinctrl-names = "default";
38 pinctrl-0 = <&pinctrl_uart3>;
39 uart-has-rtscts;
43 compatible = "brcm,bcm4330-bt";
44 max-speed = <3000000>;
45 shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
46 device-wakeup-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
47 host-wakeup-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
52 pinctrl-names = "default";
53 pinctrl-0 = <&pinctrl_uart4>;
59 srp-disable;
60 hnp-disable;
61 adp-disable;
66 fsl,tx-d-cal = <106>;
70 #address-cells = <1>;
71 #size-cells = <0>;
72 pinctrl-names = "default";
73 pinctrl-0 = <&pinctrl_wlan>;
74 bus-width = <4>;
75 no-1-8-v;
76 non-removable;
77 cap-power-off-card;
78 keep-power-in-suspend;
79 cap-sdio-irq;
80 mmc-pwrseq = <&usdhc2_pwrseq>;
85 compatible = "brcm,bcm4329-fmac";
86 interrupt-parent = <&gpio1>;
88 interrupt-names = "host-wake";
97 pinctrl_gpmi_nand: gpmi-nand {
145 MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x100b1 /* WL_DEV_WAKE - WiFi_GPIO_4 - WiFi FW UART */
146 MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b1 /* WL_HOST_WAKE - WIFI_GPIO_0 - OOB IRQ */