Lines Matching +full:sda +full:- +full:pins
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include "imx6ull-phytec-phycore-som.dtsi"
13 model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
14 compatible = "phytec,imx6ull-phygate-tauri",
15 "phytec,imx6ull-pcl063", "fsl,imx6ull";
22 gpio_keys: gpio-keys {
23 compatible = "gpio-key";
24 pinctrl-names = "default";
25 pinctrl-0 = <&pinctrl_gpio_keys>;
28 label = "KEY-A";
31 wakeup-source;
35 reg_adc1_vref_3v3: regulator-vref-3v3 {
36 compatible = "regulator-fixed";
37 regulator-name = "vref-3v3";
38 regulator-min-microvolt = <3300000>;
39 regulator-max-microvolt = <3300000>;
42 reg_s25fl064_hold: regulator-s25fl064-hold {
43 pinctrl-names = "default";
44 pinctrl-0 = <&pinctrl_s25fl064_hold>;
45 compatible = "regulator-fixed";
46 regulator-name = "s25fl064_hold";
47 regulator-min-microvolt = <3300000>;
48 regulator-max-microvolt = <3300000>;
50 enable-active-high;
51 regulator-always-on;
54 reg_usb_hub_vbus: regulator-hub-otg1-vbus {
55 pinctrl-names = "default";
56 pinctrl-0 = <&pinctrl_usbhubpwr>;
57 compatible = "regulator-fixed";
58 regulator-name = "usb_hub_vbus";
59 regulator-min-microvolt = <3300000>;
60 regulator-max-microvolt = <3300000>;
62 enable-active-high;
63 regulator-always-on;
66 reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
67 pinctrl-names = "default";
68 pinctrl-0 = <&pinctrl_usbotg1pwr>;
69 compatible = "regulator-fixed";
70 regulator-name = "usb_otg1_vbus";
71 regulator-min-microvolt = <3300000>;
72 regulator-max-microvolt = <3300000>;
74 enable-active-high;
75 regulator-always-on;
78 user_leds: user-leds {
79 compatible = "gpio-leds";
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_user_leds>,
84 user-led1 {
87 linux,default-trigger = "off";
90 user-led2 {
93 linux,default-trigger = "off";
99 pinctrl-names = "default";
100 pinctrl-0 = <&pinctrl_flexcan1>;
105 pinctrl-names = "default";
106 pinctrl-0 = <&pinctrl_flexcan2>;
111 #address-cells = <1>;
112 #size-cells = <0>;
113 pinctrl-names = "default";
114 pinctrl-0 = <&pinctrl_ecspi1>,
116 cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>,
122 pinctrl-names = "default";
123 pinctrl-0 = <&pinctrl_tpm>;
124 compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
126 spi-max-frequency = <20000000>;
127 interrupt-parent = <&gpio5>;
132 #address-cells = <1>;
133 #size-cells = <1>;
134 compatible = " jedec,spi-nor";
136 spi-max-frequency = <40000000>;
137 m25p,fast-read;
143 pinctrl-names = "default";
144 pinctrl-0 = <&pinctrl_ecspi3>;
145 cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
148 dma-names = "rx", "tx";
161 pinctrl-names = "default";
162 pinctrl-0 = <&pinctrl_enet2>;
163 phy-mode = "rmii";
164 phy-handle = <ðphy2>;
174 pinctrl-names = "default";
175 pinctrl-0 = <&pinctrl_tempsense>;
176 interrupt-parent = <&gpio5>;
178 #thermal-sensor-cells = <1>;
182 pinctrl-names = "default";
183 pinctrl-0 = <&pinctrl_rtc_int>;
186 interrupt-parent = <&gpio5>;
192 pinctrl-names = "default", "gpio";
193 pinctrl-0 = <&pinctrl_i2c2>;
194 pinctrl-1 = <&pinctrl_i2c2_gpio>;
195 sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
196 scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
201 pinctrl-names = "default", "gpio";
202 pinctrl-0 = <&pinctrl_i2c3>;
203 pinctrl-1 = <&pinctrl_i2c3_gpio>;
204 sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
205 scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
210 pinctrl-names = "default", "gpio";
211 pinctrl-0 = <&pinctrl_i2c4>;
212 pinctrl-1 = <&pinctrl_i2c4_gpio>;
213 sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
214 scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
219 ethphy2: ethernet-phy@2 {
221 micrel,led-mode = <1>;
223 clock-names = "rmii-ref";
229 pinctrl-names = "default";
230 pinctrl-0 = <&pinctrl_pwm3>;
235 pinctrl-names = "default";
236 pinctrl-0 = <&pinctrl_pwm6>;
241 pinctrl-names = "default";
242 pinctrl-0 = <&pinctrl_pwm7>;
247 pinctrl-names = "default";
248 pinctrl-0 = <&pinctrl_pwm8>;
253 pinctrl-names = "default";
254 pinctrl-0 = <&pinctrl_uart3>;
260 pinctrl-names = "default";
261 pinctrl-0 = <&pinctrl_uart4>;
262 rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
263 linux,rs485-enabled-at-boot-time;
269 pinctrl-names = "default";
270 pinctrl-0 = <&pinctrl_uart5>;
271 uart-has-rtscts;
276 pinctrl-names = "default";
277 pinctrl-0 = <&pinctrl_uart7>;
283 pinctrl-names = "default";
284 pinctrl-0 = <&pinctrl_usb_otg1>;
285 vbus-supply = <®_usb_otg1_vbus>;
287 disable-over-current;
292 vbus-supply = <®_usb_hub_vbus>;
293 disable-over-current;
299 pinctrl-names = "default", "state_100mhz", "state_200mhz";
300 pinctrl-0 = <&pinctrl_usdhc1>;
301 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
302 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
303 cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
304 no-1-8-v;
305 keep-power-in-suspend;
306 wakeup-source;
316 fsl,pins = <
322 fsl,pins = <
328 fsl,pins = <
334 fsl,pins = <
340 fsl,pins = <
346 fsl,pins = <
354 fsl,pins = <
361 fsl,pins = <
367 fsl,pins = <
376 fsl,pins = <
384 fsl,pins = <
393 fsl,pins = <
406 fsl,pins = <
413 fsl,pins = <
420 fsl,pins = <
426 fsl,pins = <
433 fsl,pins = <
440 fsl,pins = <
447 fsl,pins = <
454 fsl,pins = <
461 fsl,pins = <
468 fsl,pins = <
474 fsl,pins = <
480 fsl,pins = <
486 fsl,pins = <
492 fsl,pins = <
498 fsl,pins = <
508 fsl,pins = <
515 fsl,pins = <
523 fsl,pins = <
530 fsl,pins = <
537 fsl,pins = <
543 fsl,pins = <
549 fsl,pins = <
561 fsl,pins = <
572 fsl,pins = <
583 fsl,pins = <