Lines Matching +full:vcc +full:- +full:drv +full:- +full:supply
4 * This file is dual-licensed: you can use it either under the terms
43 /dts-v1/;
44 #include "sun6i-a31s.dtsi"
45 #include <dt-bindings/gpio/gpio.h>
48 model = "Sinovoip BPI-M2";
49 compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s";
56 stdout-path = "serial0:115200n8";
60 compatible = "gpio-leds";
62 led-0 {
63 label = "bpi-m2:blue:usr";
67 led-1 {
68 label = "bpi-m2:green:usr";
72 led-2 {
73 label = "bpi-m2:red:usr";
79 compatible = "mmc-pwrseq-simple";
80 reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
85 cpu-supply = <®_dcdc3>;
93 pinctrl-names = "default";
94 pinctrl-0 = <&gmac_rgmii_pins>;
95 phy-handle = <&phy1>;
96 phy-mode = "rgmii";
97 phy-supply = <®_dldo1>;
102 pinctrl-names = "default";
103 pinctrl-0 = <&s_ir_rx_pin>;
108 phy1: ethernet-phy@1 {
110 reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */
111 reset-assert-us = <10000>;
112 reset-deassert-us = <30000>;
117 vmmc-supply = <®_dcdc1>;
118 bus-width = <4>;
119 cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
124 pinctrl-names = "default";
125 pinctrl-0 = <&mmc2_4bit_pins>;
126 vmmc-supply = <®_aldo1>;
127 mmc-pwrseq = <&mmc2_pwrseq>;
128 bus-width = <4>;
129 non-removable;
134 compatible = "brcm,bcm4329-fmac";
135 interrupt-parent = <&r_pio>;
137 interrupt-names = "host-wake";
149 compatible = "x-powers,axp221";
151 interrupt-parent = <&r_intc>;
153 eldoin-supply = <®_dcdc1>;
154 x-powers,drive-vbus-en;
161 regulator-min-microvolt = <3300000>;
162 regulator-max-microvolt = <3300000>;
163 regulator-name = "vcc-wifi";
167 regulator-always-on;
168 regulator-min-microvolt = <2500000>;
169 regulator-max-microvolt = <2500000>;
170 regulator-name = "vcc-gmac";
174 regulator-always-on;
175 regulator-min-microvolt = <3000000>;
176 regulator-max-microvolt = <3000000>;
177 regulator-name = "avcc";
181 regulator-always-on;
182 regulator-min-microvolt = <700000>;
183 regulator-max-microvolt = <1320000>;
184 regulator-name = "vdd-cpus";
188 regulator-always-on;
189 regulator-min-microvolt = <3000000>;
190 regulator-max-microvolt = <3000000>;
191 regulator-name = "vdd-3v0";
195 regulator-min-microvolt = <700000>;
196 regulator-max-microvolt = <1320000>;
197 regulator-name = "vdd-gpu";
201 regulator-always-on;
202 regulator-min-microvolt = <700000>;
203 regulator-max-microvolt = <1320000>;
204 regulator-name = "vdd-cpu";
208 regulator-always-on;
209 regulator-min-microvolt = <700000>;
210 regulator-max-microvolt = <1320000>;
211 regulator-name = "vdd-sys-dll";
215 regulator-always-on;
216 regulator-min-microvolt = <1500000>;
217 regulator-max-microvolt = <1500000>;
218 regulator-name = "vcc-dram";
222 regulator-min-microvolt = <3000000>;
223 regulator-max-microvolt = <3000000>;
224 regulator-name = "vcc-mac";
228 regulator-min-microvolt = <2800000>;
229 regulator-max-microvolt = <2800000>;
230 regulator-name = "avdd-csi";
234 regulator-always-on;
235 regulator-min-microvolt = <3300000>;
236 regulator-max-microvolt = <3300000>;
237 regulator-name = "vcc-pb";
241 regulator-min-microvolt = <1800000>;
242 regulator-max-microvolt = <1800000>;
243 regulator-name = "vdd-csi";
248 regulator-always-on;
249 regulator-min-microvolt = <1800000>;
250 regulator-max-microvolt = <1800000>;
251 regulator-name = "vcc-pm-cpus";
256 pinctrl-names = "default";
257 pinctrl-0 = <&uart0_ph_pins>;
266 gpio-line-names =
268 "ETXD0", "ETXD1", "ETXD2", "ETXD3", "SDC0-DET", "", "",
275 "CN7-P29", "CN7-P31", "CN7-P33", "CN7-P35", "CN7-P37",
276 "CN7-P28", "CN7-P27", "CN7-P32", "", "", "", "", "", "",
281 "", "", "", "", "", "", "WL-SDIO-CMD", "WL-SDIO-CLK",
282 "WL-SDIO-D0", "WL-SDIO-D2", "WL-SDIO-D2", "WL-SDIO-D3",
284 "", "USB-DRV", "", "", "", "",
287 "CN9-P09", "CN9-P11", "CN9-P13", "CN9-P15", "CN9-P17",
288 "CN9-P19", "CN9-P21", "CN9-P23", "CN9-P25", "CN9-P27",
289 "CN9-P29", "CN9-P31", "CN9-P33", "CN9-P35", "CN9-P37",
290 "CN9-P39", "CN9-P40", "CN9-P38", "CN9-P36", "CN9-P34",
291 "CN9-P32", "CN9-P30", "CN9-P28", "CN9-P26", "CN9-P22",
292 "CN9-P14", "CN9-P18", "CN9-P16", "", "", "", "",
295 "CN6-P20", "CN6-P24", "CN6-P30", "CN6-P28", "CN7-P08",
296 "CN7-P10", "CN7-P36", "CN7-P38", "CN6-P17", "CN6-P19",
297 "CN6-P21", "CN6-P23", "CN6-P25", "CN6-P27", "CN6-P29",
298 "CN6-P31", "", "", "", "", "", "", "", "", "", "", "",
302 "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
303 "SDC0-D2", "", "", "", "", "", "", "", "", "", "", "",
308 "CN9-P06", "CN9-P08", "CN9-P20", "CN9-P12", "CN9-P07",
309 "LED-PWR", "CN7-P13", "CN7-P11", "CN7-P22", "CN7-P15",
310 "LED-G", "LED-B", "CN7-P26", "CN7-P24", "CN7-P23",
311 "CN7-P19", "CN7-P21", "HCEC", "CN6-P22", "", "", "", "",
315 "", "", "", "", "", "", "", "", "", "CN7-P07",
316 "CN7-P12", "CN7-P16", "CN7-P18", "CN9-P10", "CN6-P16",
317 "CN6-P14", "CN9-P04", "CN9-P02", "CN7-P05", "CN7-P03",
318 "CN8-P03", "CN8-P02", "", "", "CN6-P34", "CN6-P32",
319 "CN6-P26", "CN6-P18", "", "", "", "";
323 gpio-line-names =
325 "PMU-SCK", "PMU-SDA", "VBAT-EN", "", "IR-RX",
326 "WL-WAKE-HOST", "BT-WAKE_HOST", "BT-ENABLE",
327 "WL-PMU-EN", "", "", "", "", "", "", "", "", "", "", "",
331 "CN6-P12", "CN6-P35", "CN7-P40", "", "", "", "", "", "",