Lines Matching refs:audio
46 Tuners have two writable properties, the audio mode and the radio
47 frequency. To change the audio mode, applications initialize the
51 different audio mode if the requested mode is invalid or unsupported.
53 selected audio mode.
90 indicate the ability to decode audio subprograms. They will *not*
120 Some tuners or audio decoders can determine the received audio
121 subprograms by analyzing audio carriers, pilot tones or other
127 - receiving mono audio
131 - receiving stereo audio and a secondary audio program
135 - receiving mono or stereo audio, the hardware cannot distinguish
139 - receiving bilingual audio
143 - receiving mono, stereo or bilingual audio
158 The selected audio mode, see :ref:`tuner-audmode` for valid
159 values. The audio mode does not affect audio subprogram detection,
163 received audio programs do not match.
246 - Stereo audio reception is supported.
249 - Reception of the primary language of a bilingual audio program is
250 supported. Bilingual audio is a feature of two-channel systems,
251 transmitting the primary language monaural on the main audio
256 - Reception of the secondary language of a bilingual audio program
261 - Reception of a secondary audio program is supported. This is a
263 standard. Two audio carriers are available for mono or stereo
310 - The tuner receives a mono audio signal.
313 - The tuner receives a stereo audio signal.
316 - The tuner receives the primary language of a bilingual audio
321 - The tuner receives the secondary language of a bilingual audio
322 signal (or a second audio program).
348 - Play mono audio. When the tuner receives a stereo signal this a
353 - Play stereo audio. When the tuner receives bilingual audio it may
369 bilingual audio or SAP, or their reception is not supported the
375 bilingual audio or SAP, or their reception is not supported the
385 bilingual audio or SAP, it shall fall back to ``MODE_LANG1`` or