media/dvb/fe_property_parameters.rst

12 a subset of them are needed to setup a frontend.
29 Interpret the cache of data, build either a traditional frontend
38 Reset a cache of data specific to the frontend here. This does not
58      the main carrier has a 1/7 offset from the center.
61      about 143kHz. E.g. a valid frequency could be 474,143 kHz. The
82 The table below presents a summary of the types of modulation types
147      :ref:`DTV-BANDWIDTH-HZ`. I will however fill it back with a
321 technical background needed to program a device)
323 An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a
331 Assuming a normal 13-segment ISDB-T spectrum he can align the 8 segments
335 consisting of several subchannels with a predefined IDs. A sub-channel
391 reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders.
393 ISDB-T has 3 hierarchical layers which each can use a part of the
415 a ``SEGMENT_COUNT`` of 1.
439 The Forward Error Correction mechanism used by a given ISDB Layer, as
454 The modulation used by a given ISDB Layer, as defined by
657 A parade is a collection of up to eight MH groups, conveying one or two
670 Number of MH groups per MH subframe for a designated parade.
928 streams on a single transport stream. This property enables the digital
958 introduction, FE_GET_INFO was used to determine a frontend type. A
959 frontend which provides more than a single delivery system,
960 FE_GET_INFO doesn't help much. Applications which intends to use a
962 with it, rather than trying to use FE_GET_INFO. In the case of a
964 in a more structured format