Lines Matching refs:using
19 an example setup using a data-center-class switch ASIC chip. Other setups
86 struct net_device (using register_netdev()) for each enumerated physical switch
118 Udev rules should be used for port netdev naming, using some unique attribute
128 name for each port using port PHYS name. The udev rule would be::
157 tunnels can be built on ports. These constructs are built using standard Linux
213 discouraged: all static FDB entries should be added on a bridge port using the
231 in turn, will notify the bridge driver using the switchdev notifier call::
256 Learning on the port should be disabled on the bridge using the bridge command::
279 device does not support ageing, the driver can simulate ageing using a
281 notified to the bridge using SWITCHDEV_FDB_DEL. See rocker driver for
288 second. (The last-used time is visible using the bridge -s fdb option).
295 driver of STP state change on a port using the switchdev op
320 the skb using the ingress bridge port's mark and prevent it from being forwarded
350 using register_fib_notifier. The following events are available:
408 The driver can monitor for updates to arp_tbl using the netevent notifier
466 must be forwarded and may be processed using a VLAN device (see below).
518 treated as tagged or not: a bridge using the 802.1ad protocol must treat both