Lines Matching refs:a
32 DesignWare(R) Cores Ethernet MAC 10/100/1000 Universal version 3.70a
46 | Ethernet MAC Universal | N/A | 3.73a | GMAC |
48 | Ethernet Quality-of-Service | 4.00a | N/A | GMAC4+ |
50 | XGMAC - 10G Ethernet MAC | 2.10a | N/A | XGMAC2+ |
52 | XLGMAC - 100G Ethernet MAC | 2.00a | N/A | XLGMAC2+ |
105 If the driver is built as a module the following optional parameters are used
189 The xmit method is invoked when the kernel needs to transmit a packet; it sets
190 the descriptors in the ring and informs the DMA engine that there is a packet
211 The incoming packets are stored, by the DMA, in a list of pre-allocated socket
233 tested on DesignWare(R) Cores Ethernet MAC Universal version 3.41a and later.
277 chip family. When a packet is sent through TCP protocol, the TCP stack ensures
281 a packet which will have a length (after adding headers) > 1514 the packet
294 Energy Efficient Ethernet (EEE) enables IEEE 802.3 MAC sublayer along with a
308 To enter in TX LPI mode the driver needs to have a software timer that enable
328 PHYLIB stuff. In fact, the HW provides a subset of extended registers to
439 25) Callbacks used for calling a custom initialization; This is sometimes
682 For example a user can be use the ethtool support to get statistics: e.g.
698 If an issue is identified with the released source code on a supported kernel
699 with a supported adapter, email the specific information related to the