Lines Matching refs:configuration
75 such, the configuration procedures differ somewhat between the two types of
156 Utility if you want to change the adapter's configuration in EEPROM.
159 configuration parameters on the command-line to override the EEPROM's settings
160 or for interface configuration when an EEPROM is not used. (CS8920-based
166 installing a CS8900-based adapter and the default configuration is acceptable.)
185 You should only change the default configuration settings if conflicts with
186 another adapter exists. To change the adapter's configuration, run the
219 with the 'modprobe' command. Many of the adapter's configuration parameters can
222 configuration when an EEPROM is not used.
230 configuration options are available on the command line::
251 will override the corresponding configuration value stored in
271 e) The minimum command-line configuration required if an EEPROM is
293 determine configuration information which is passed to a driver
294 module when it is loaded. All the configuration options which are
385 test the functionality of the adapter with the hardware configuration you have
402 2. The adapter's current configuration is displayed. Hit the ENTER key to
415 assigned during hardware configuration. The following tests are performed:
543 diagnostics self-test to ensure the new configuration is free of conflicts
595 2.) Adapter configuration