Lines Matching refs:Utility

125    * CS8900/20 Setup Utility (DOS-based)
156 Utility if you want to change the adapter's configuration in EEPROM.
163 Since the CS8900/20 Setup Utility is a DOS-based application, you must install
165 Utility before installation in the target LINUX system.  (Not required if
187 CS8900/20 Setup Utility.
196 run the CS8900/20 Setup Utility to disable PnP and configure the
383 the CS8900/20 Setup Utility can be used to test the functionality of the
389 Utility).
393 	 The Setup Utility's diagnostics are designed to run in a
400    1.  Boot DOS on the PC and start the CS8900/20 Setup Utility.
472 installed and have the CS8900/20 Setup Utility running.  The first PC is
485 	connection to act as the Responder.  Run the CS8900/20 Setup Utility
490 	start the CS8900/20 Setup Utility.
534 If an IO conflict occurs, run the CS8900/20 Setup Utility and perform a
542 CS8900/20 Setup Utility.  Once reinstalled in the target system, run the